Tetraethyllead

Tetraethyllead
IUPAC name Tetraethylplumbane
Other names Lead tetraethyl Tetraethyl lead Tetra-ethyl lead
Identifiers
Abbreviations	TEL
CAS number	78-00-2 Y
PubChem	6511
ChemSpider	6265 Y
UNII	13426ZWT6A Y
EC number	201-075-4
UN number	1649
MeSH	Tetraethyl+lead
ChEBI	CHEBI:30182 Y
RTECS number	TP4550000
Beilstein Reference	3903146
Gmelin Reference	68951
Jmol-3D images	{{#if:CC[Pb](CC)(CC)CC|Image 1
SMILES CC[Pb](CC)(CC)CC
InChI InChI=1S/4C2H5.Pb/c4*1-2;/h4*1H2,2H3; Y Key: MRMOZBOQVYRSEM-UHFFFAOYSA-N Y
Properties
Molecular formula	C8H20Pb
Molar mass	323.44 g mol−1
Appearance	Colorless liquid
Density	1.653 g cm−3
Melting point	−136 °C; −213 °F; 137 K
Boiling point	84 to 85 °C; 183 to 185 °F; 357 to 358 K (15 mmHg)
Refractive index (nD)	1.5198
Structure
Molecular shape	Tetrahedral
Dipole moment	0 D
Hazards
EU classification	T+ N
R-phrases	R61, R26/27/28, R33, R50/53, R62
S-phrases	S53, S45, S60, S61
NFPA 704	2 3 3
Flash point	73 °C; 163 °F; 346 K
Related compounds
Related compounds	Tetraethylgermanium Tetraethyltin
Y (verify) (what is: Y/N?) Except where noted otherwise, data are given for materials in their standard state (at 25 °C (77 °F), 100 kPa)
Infobox references

Tetraethyllead (common name tetraethyl lead), abbreviated TEL, is an organolead compound with the formula (CH₃CH₂)₄Pb. It was mixed with gasoline (petrol) beginning in the 1920s as an inexpensive octane booster that allowed engine compression to be raised substantially, which in turn increased vehicle performance and fuel economy.^[1][2] TEL was phased out starting in the US in the mid-1970s because of its neurotoxicity and its damaging effect on catalytic converters. It is still used as an additive in some grades of aviation gasoline. Innospec has claimed to be the last firm still making TEL, but as of 2013 it appears to also be illegally produced by multiple companies in China.^[3]

In motor fuel

Tetraethyl lead was extensively used as an additive to gasoline, wherein it served as an effective antiknock agent and prevented exhaust valve and seat wear.

Valve wear preventative

Tetraethyl lead works as a buffer against microwelds forming between the hot exhaust valves and their seats.^[4] Once these valves reopen, the microwelds pull apart and leave the valves with a rough surface that would abrade the seats, leading to valve recession. When lead began to be phased out of motor fuel, the automotive industry began specifying hardened valve seats and upgraded exhaust valve materials to prevent valve recession without lead.^[5]

Antiknock agent

A gasoline-fueled reciprocating engine requires fuel of sufficient octane rating to prevent uncontrolled combustion known as engine knocking ("knock" or "ping").^[6] Antiknock agents allow the use of higher compression ratios for greater efficiency^[7] and peak power. Adding varying amounts of TEL to gasoline allowed easy, inexpensive control of octane ratings; aviation spirits used in WWII reached 150 octane to enable supercharged engines such as the Rolls-Royce Merlin and Griffon to produce 1500 HP at altitude.^[8] In military aviation, TEL manipulation allowed a range of different fuels to be tailored for particular flight conditions, and ease and safety of handling.

The use of TEL in gasoline started in the US, while in Europe, alcohol was initially used. The advantages of leaded gasoline—its higher energy content and storage quality—eventually led to a universal switch to leaded fuel. One of the greatest advantages of TEL over other antiknock agents or the use of high-octane blend stocks is the very low concentrations needed. Typical formulations called for 1 part of prepared TEL to 1260 parts untreated gasoline. Competing antiknock agents must be used in greater amounts, often reducing the energy content of the gasoline.

Phaseout and ban

In most industrialised countries, a phaseout of TEL from motor fuels was completed by the early 2000s because of concerns over air and soil lead levels and the accumulative neurotoxicity of lead. Leaded fuel also spoils catalytic converters, which were introduced in the 1970s to meet tightening emissions regulations. The need for TEL was lessened by several advances in automotive engineering and petroleum chemistry. Safer methods for making higher octane blending stocks such as reformate and iso-octane reduced the need to rely on TEL, as did other antiknock additives of varying toxicity including metallic compounds such as MMT; oxygenates including MTBE, TAME, and ETBE.

Leaded gasoline remains available at the pump in Algeria, Iraq, Yemen, Myanmar, North Korea (where very little is used), and possibly Afghanistan, where information is unclear.^[9] (Also see a previous report^[10] from 2011.) North Korea and Myanmar appear to buy their TEL from China^[3] while Innospec sells TEL to Algeria, Iraq, and Yemen. Algeria is scheduled to phase out leaded gasoline in 2014 and Iraq in 2015. There is not yet a timeline for elimination of leaded gasoline in Yemen or Myanmar.

Lead-replacement additives were scientifically tested and some were approved by the Federation of British Historic Vehicle Clubs at the UK's Motor Industry Research Association in 1999. In Europe, Professor Derek Bryce-Smith was among the first to highlight the potential dangers of TEL and became a leading campaigner for removal of lead additives from petrol.^[11] However, leaded motor fuel re-entered the UK market in small quantities from 2000 in response to lobbying from classic-car organisations who contended their vehicles would be rendered useless without leaded fuel. The lead content is up to 0.15 grams per litre; Bayford & Co is the only wholesale supplier.^{[citation needed]}

Vehicles designed and built to run on leaded fuel may require modification to run on unleaded gasoline. These modifications fall into two categories: those required for physical compatibility with unleaded fuel, and those performed to compensate for the relatively low octane of early unleaded fuels. Physical compatibility requires the installation of hardened exhaust valves and seats. Compatibility with reduced octane was addressed by reducing compression, generally by installing thicker cylinder head gaskets and/or rebuilding the engine with compression-reducing pistons. The availability of high-octane unleaded gasoline has reduced or eliminated the need to decrease compression ratios.

Leaded-fuel bans for road vehicles came into effect as follows:

In race vehicles

Leaded fuel was used in professional auto racing.

Since 1993, Formula One racing cars have been required to use normal unleaded 'super' petrol compliant with EU standards—the same petrol provided by ordinary petrol stations.^[16]

NASCAR switched to unleaded fuel in 2008 after years of research, spurred when blood tests of NASCAR teams revealed elevated blood lead levels.^[17][18] An initial test in 2005 with usually dependable motors had led to five cars retiring with engine troubles in a single race.^[19]

Aviation gasoline

TEL remains an ingredient of 100 octane avgas for piston-engine aircraft. The current formulation of 100LL (low lead, blue) aviation gasoline contains 2.12 grams of TEL per gallon, half the amount of the previous 100/130 (green) octane avgas (at 4.24 grams per gallon),^[20] but far more than the 0.1 gram per gallon permitted in automotive leaded gasoline or the 0.001 grams per gallon in automotive unleaded gasoline sold in the United States.^[21] The United States Environmental Protection Agency, FAA, and others are working on economically feasible replacements for leaded avgas.

Alternative antiknock agents

Antiknock agents are classed as "high-percentage" additives, such as alcohol, and "low-percentage" additives based on heavy elements. Since the main problem with TEL is its lead content, many alternative additives that contain less poisonous metals have been examined. A manganese-carrying additive, methylcyclopentadienyl manganese tricarbonyl (MMT or methylcymantrene), was used for a time as an antiknock agent, though its safety is controversial and it has been the subject of bans and lawsuits. Ferrocene, an organometallic compound of iron, is also used as an antiknock agent although with some significant drawbacks.^[22]

High-percentage additives are organic compounds that do not contain metals, but require much higher blending ratios, such as 20–30% for benzene and ethanol. It had been established by 1921 that ethanol was an effective antiknock agent, but TEL was introduced instead mainly for commercial reasons.^[23] Oxygenates such as TAME derived from natural gas, MTBE made from methanol, and ethanol-derived ETBE, have largely supplanted TEL. MTBE has environmental risks of its own and there are also bans on its use. ETBE requires more expensive ethanol as a starting material.

Improvements to gasoline itself decrease the need for antiknock additives. Synthetic iso-octane and alkylate are examples of such blending stocks. Benzene and other high-octane aromatics can be also blended to raise the octane number, but they are disfavored today because of toxicity and carcinogenicity.

Synthesis and properties

TEL is produced by reacting chloroethane with a sodium–lead alloy.^[6]

4 NaPb + 4 CH₃CH₂Cl → (CH₃CH₂)₄Pb + 4 NaCl + 3 Pb

TEL is a viscous colorless liquid. Because TEL is charge neutral and contains an exterior of alkyl groups, it is highly lipophilic and soluble in petrol (gasoline).

Despite decades of research, no reactions were found to improve upon this rather difficult process that involves metallic sodium and converts only 25% of the lead to TEL. A related compound, tetramethyllead, was commercially produced by a different electrolytic reaction.^[6] A process with lithium was developed, but never put into practice.

Reactions

A noteworthy feature of TEL is the weakness of its four C–Pb bonds. At the temperatures found in internal combustion engines, (CH₃CH₂)₄Pb decomposes completely into lead and lead oxides as well as combustible, short-lived ethyl radicals. Lead and lead oxide scavenge radical intermediates in combustion reactions. This prevents ignition of unburnt fuel during the engine's exhaust stroke.^[6] Lead itself is the reactive antiknock agent, and TEL serves as a gasoline-soluble lead carrier.^[6] When (CH₃CH₂)₄Pb burns, it produces not only carbon dioxide and water, but also lead:

(CH₃CH₂)₄Pb + 13 O₂ → 8 CO₂ + 10 H₂O + Pb

This lead can oxidize further to give species such as lead(II) oxide:

2 Pb + O₂ → 2 PbO

Pb and PbO would quickly over-accumulate and destroy an engine. For this reason, the lead scavengers 1,2-dibromoethane and 1,2-dichloroethane are used in conjunction with TEL—these agents form volatile lead(II) bromide and lead(II) chloride, respectively, which are flushed from the engine and into the air.

Formulation of ethyl fluid

TEL was supplied for mixing with raw gasoline in the form of ethyl fluid, which was TEL blended with the lead scavengers 1,2-dibromoethane and 1,2-dichloroethane. Ethyl fluid also contained a reddish dye to distinguish treated from untreated gasoline and discourage the use of leaded gasoline for other purposes such as cleaning.

Ethyl fluid was added to gasoline at a ratio of 1:1260, usually at the refinery.^{[citation needed]} Because of the widespread use and toxic nature of ethyl fluid, the Ethyl Corporation developed an expertise in its safe handling. In the 1920s before safety procedures were yet developed, 17 workers for the Ethyl Corporation, DuPont, and Standard Oil died ^{[citation needed]} from the effects of exposure to lead.

The formula for ethyl fluid is:^[6]

• Tetraethyllead 61.45%
• 1,2-Dibromoethane 17.85%
• 1,2-Dichloroethane 18.80%
• Inerts & dye 1.90%

Dibromoethane and dichloroethane act in a synergistic manner, where a particular mixing ratio provides the best lead scavenging ability.^[6]

Toxicity

Lead pollution from engine exhaust is dispersed into the air and into the vicinity of roads and easily inhaled. Contact with concentrated TEL leads to acute lead poisoning:

Lead is a toxic metal that accumulates in the body and is associated with subtle and insidious neurotoxic effects especially at low exposure levels, such as low IQ and antisocial behavior.^[24][25][26] It has particularly harmful effects on children. These concerns eventually led to the ban on TEL in automobile gasoline in many countries. Some neurologists have speculated that the lead phaseout may have caused average IQ levels to rise by several points in the US (by reducing cumulative brain damage throughout the population, especially in the young). For the entire US population, during and after the TEL phaseout, the mean blood lead level dropped from 16 μg/dL in 1976 to only 3 μg/dL in 1991.^[27] The US Centers for Disease Control considered blood lead levels "elevated" when they were above 10 μg/dL.

Lead exposure affects the intelligence quotient (IQ) such that a blood lead level of 30 μg/dL is associated with a 6.9-point reduction of IQ, with most reduction (3.9 points) occurring below 10 μg/dL.^[28]

Reductions in the average blood lead level is believed to have been a major cause for falling violent crime rates in the United States^[29] and South Africa.^[30] Economist Jessica Wolpaw Reyes of Amherst College found that declining exposure to lead has correlated with up to a 56% decline in crime from 1992 to 2002. Including other factors that are believed to have increased crime rates over that period Reyes found that this led to an actual decline of 34% over that period.^[31]

A statistically significant correlation has been found between the usage rate of leaded gasoline and violent crime: taking into account a 22-year time lag, the violent crime curve virtually tracks the lead exposure curve.^[27][32] After the ban on TEL, blood lead levels in US children dramatically decreased.^[27]

Although leaded gasoline is largely gone in North America, it has left high concentrations of lead in the soil adjacent to roads that were constructed prior to its phaseout. Children are particularly at risk if they consume this.^[33]

History

In 1853, German chemist Karl Jacob Löwig (1803-1890) first prepared what he claimed was Pb₂(C₂H₅)₃ from ethyl iodide and an alloy of lead and sodium.^[34] In 1859, English chemist George Bowdler Buckton (1818-1905) reported what he claimed was Pb(C₂H₅)₂ from zinc ethyl (Zn(C₂H₅)₂) and lead chloride.^[35] Later authors credit both methods of preparation with producing tetraethyl lead.^[36]

History of TEL in fuels

Regardless of the details of the chemical discoveries, tetraethyl lead remained unimportant commercially until the 1920s.^[23] In 1921, TEL was found to be an effective antiknock agent by Thomas Midgley, working under Charles Kettering at General Motors Corporation Research.^[37] General Motors patented the use of TEL as an antiknock agent and called it "Ethyl" in its marketing materials, thereby avoiding the negative connotation of the word "lead".^[23] Early research into "engine knocking" (also called "pinging" or "pinking") was also led by A.H. Gibson and Harry Ricardo in England and Thomas Boyd in the United States. The discovery that lead additives modified this behavior led to the widespread adoption of their use in the 1920s, and therefore more powerful, higher compression engines.^[38] In 1924, Standard Oil of New Jersey (ESSO/EXXON) and General Motors created the Ethyl Gasoline Corporation to produce and market TEL.

History of controversy and phase-out

The toxicity of concentrated TEL was recognized early on, as lead had been recognized since the 19th century as a dangerous substance that could cause lead poisoning.^[38] In 1924, a public controversy arose over the "loony gas," after at least 17 workers died, and many others severely injured, in Standard and DuPont refineries in New Jersey.^[38] There had also been a private controversy for two years prior to this controversy, several public health experts including Alice Hamilton and Yandell Henderson engaged Midgley and Kettering with letters warning of the dangers to public health.^[38] After the death of the workers, dozens of newspapers reported on the issue.^[38][39] In 1925, the sales of TEL were suspended for one year to conduct a hazard assessment.^[6][23]

The U.S. Public Health Service conducted a conference in 1925. The conference was initially expected to last for several days, but reportedly the conference decided that evaluating presentations on alternative anti-knock agents was not "its province", so it lasted a single day.^[38] Kettering and Midgley stated that no alternatives for anti-knocking were available, although private memos showed discussion of such agents.^[38] One commonly discussed agent was ethanol, although it was not as cheap.^[38] The Public Health Service created a committee that reviewed a government-sponsored study of workers and an Ethyl lab test, and concluded that while leaded gasoline should not be banned, it should continue to be investigated.^[38] The low concentrations present in gasoline and exhaust were not perceived as immediately dangerous. A U.S. Surgeon General committee issued a report in 1926 that concluded there was no real evidence that the sale of TEL was hazardous to human health but urged further study.^[23] In the years that followed, research was heavily funded by the lead industry; in 1943, Randolph Byers found children with lead poisoning had behavior problems, but he was threatened with a lawsuit and the research ended.^[38]

In the late 1920s, Robert Kehoe of the University of Cincinnati was the Ethyl Corporation's chief medical consultant. In 1928, Dr. Kehoe expressed the opinion that there was no basis for concluding that leaded fuels posed any health threat.^[23] He convinced the Surgeon General that the dose–response relationship of lead was "no effect" below a certain threshold.^[40] As the head of Kettering Laboratories for many years, Kehoe would become a chief promoter of the safety of TEL, an influence that did not begin to wane until about the early 1960s. But by the 1970s, the general opinion of the safety of TEL would change, and by 1976 the U.S. government would begin to require the phaseout of this product.

In the late 1940s and early 1950s, Clair Patterson accidentally discovered the pollution caused by TEL in the environment while determining the age of the earth. As he attempted to measure lead content of very old rocks, and the time it took uranium to decay into lead, the readings were made inaccurate by lead in the environment that contaminated his samples. He was then forced to work in a clean room to keep his samples uncontaminated by environmental pollution of lead. After coming up with a fairly accurate estimate of the age of the earth, he turned to investigating the lead contamination problem by examining ice cores from countries such as Greenland. He realized that the lead contamination in the environment dated from about the time that TEL became widely used as a fuel additive in gasoline. Being aware of the health dangers posed by lead and suspicious of the pollution caused by TEL, he became one of the earliest and most effective opponents of its use.^[41]

In the 1960s, the first clinical works were published proving the toxicity of this compound in humans, e.g. by Mirosław Jan Stasik.^[42]

In the 1970s, Herbert Needleman found that higher blood levels in children were correlated with decreased school performance. Needleman was repeatedly accused of scientific misconduct by individuals within the lead industry, but he was eventually cleared by a scientific advisory council.^[38]

In the U.S. in 1972, the United States Environmental Protection Agency launched an initiative to phase out leaded gasoline based on a regulation under the authority of the Clean Air Act Extension of 1970. Ethyl Corp's response was to sue the EPA. Although the EPA's regulation was initially dismissed,^[38] the EPA won the case on appeal, so the TEL phaseout began in 1976 and was completed by 1986. A 1994 study indicated that the concentration of lead in the blood of the U.S. population had dropped 78% from 1976 to 1991.^[43]

In the U.S., the phase-out of leaded gasoline was first implemented in 1973 — due in great part to studies conducted by Philip J. Landrigan. In 1995, leaded fuel accounted for only 0.6% of total gasoline sales and less than 2000 short tons (1814 t) of lead per year. From 1 January 1996, the U.S. Clean Air Act banned the sale of leaded fuel for use in on-road vehicles. Similar bans in other countries have resulted in lowering levels of lead in people's bloodstreams.^[44][45]

By 2000, the TEL industry had moved the major portion of their sales to developing countries whose governments they lobbied against phasing out leaded gasoline.^[23] Leaded gasoline was withdrawn entirely from the European Union market on 1 January 2000, although it had been banned much earlier in most member states. Other countries also phased out TEL.^[46]

By 2011, the United Nations announced that it had been successful in phasing out leaded gasoline worldwide. "Ridding the world of leaded petrol, with the United Nations leading the effort in developing countries, has resulted in $2.4 trillion in annual benefits, 1.2 million fewer premature deaths, higher overall intelligence and 58 million fewer crimes," the United Nations Environmental Programme said.^[47] The announcement was slightly premature, as the phaseout has not been completed.

In literature

The effects of tetraethyllead are described in The Roman Hat Mystery by Ellery Queen.

See also

• Lead
• Lead poisoning
• Elmer Keiser Bolton
• Ethyl Corporation
• Organolead chemistry
• Ethyl tert-butyl ether (ETBE)
• tert-Amyl methyl ether (TAME)
• Methyl tert-butyl ether (MTBE)

References

External links

• U.S. Gov't, Agency for Toxic Substances and Disease Registry. Case Studies in Environmental Medicine (CSEM): Lead Toxicity
• U.S. Gov't, Agency for Toxic Substances and Disease Registry. ToxFAQs: Lead
• U.S. Gov't, National Institute for Occupational Safety and Health. NIOSH Pocket Guide to Chemical Hazards
• Australian Government, National Pollutant Inventory - Lead and Lead Compounds Fact Sheet
• Kovarik, Bill (1999). Charles F. Kettering and the 1921 Discovery of Tetraethyl Lead
• True unleaded alternative for 100LL needed for general aviation

v t e Motor fuels Fuel types Gasoline/petrol Diesel Biodiesel Lead Replacement Petrol Kerosene Compressed natural gas Hydrogen Ethanol Racing fuel (Tetraethyllead) Fuel additives Butyl rubber Butylated hydroxytoluene 1,2-Dibromoethane 1,2-Dichloroethane Dimethyl methylphosphonate 2,4-Dimethyl-6-tert-butylphenol Dinonylnaphthylsulfonic acid 2,6-Di-tert-butylphenol Ecalene Ethylenediamine Metal deactivator Methyl tert-butyl ether Nitromethane Tetraethyllead Tetranitromethane Fluids Motor oil Antifreeze Automatic transmission fluid Brake fluid Gear oil Windshield washer fluid Retail Fuel card Full service MTBE controversy Pay at the pump