TEMPO

From Wikipedia, the free encyclopedia
This article is about the chemical compound. For other uses, see Tempo (disambiguation).
TEMPO
Other names

(2,2,6,6-Tetramethyl-piperidin-1-yl)oxyl

Identifiers
CAS number 2564-83-2 YesY
PubChem 2724126
ChemSpider 2006285 YesY
ChEBI CHEBI:32849 YesY
ChEMBL CHEMBL606971 YesY
RTECS number TN8991900
Jmol-3D images {{#if:CC1(CCCC(N1[O])(C)C)C|Image 1
Properties
Molecular formula C9H18NO
Molar mass 156.25 g/mol
Melting point 36–38 °C
Boiling point sublimes under vacuum
Hazards
MSDS External MSDS
R-phrases R34
S-phrases S26 S36/37/39 S45
 YesY (verify) (what is: YesY/N?)
Except where noted otherwise, data are given for materials in their standard state (at 25 °C (77 °F), 100 kPa)
Infobox references

(2,2,6,6-Tetramethylpiperidin-1-yl)oxy, or (2,2,6,6-tetramethylpiperidin-1-yl)oxidanyl or TEMPO is a chemical compound with the formula (CH2)3(CMe2)2NO. This heterocyclic compound is a red-orange, sublimable solid. As a stable radical, it has applications in chemistry and biochemistry.[1] TEMPO was discovered by Lebedev and Kazarnowskii in 1960.[2] It is prepared by oxidation of 2,2,6,6-tetramethylpiperidine. TEMPO is widely used as a radical trap, as a structural probe for biological systems in conjunction with electron spin resonance spectroscopy, as a reagent in organic synthesis, and as a mediator in controlled free radical polymerization.[3] The stability of this radical is attributed to the resonance provided by non-bonding electrons on the nitrogen atom, which form a 2c3e (half-) bond between nitrogen and oxygen, and hyperconjugative ability. Additional stability arises from the steric protection provided by the four methyl groups adjacent to the nitroxyl group; however, the methyl groups prevent a double bond occurring between either carbon adjacent to nitrogen.[4] The stability of the radical is also indicated by the weakness of the O-H bond in the hydrogenated derivative TEMPO-H. With an O-H bond dissociation energy of about 70 kcal/mol, this bond is about 30% weaker than a typical O-H bond.[5]

Application in organic synthesis

TEMPO is employed in organic synthesis as a catalyst for the oxidation of primary alcohols to aldehydes. The actual oxidant is the N-oxoammonium salt. In a catalytic cycle with sodium hypochlorite as the stoichiometric oxidant, hypochlorous acid generates the N-oxoammonium salt from TEMPO.

One typical reaction example is the oxidation of (S)-(-)-2-methyl-1-butanol to (S)-(+)-2-methylbutanal.[6] 4-Methoxyphenethyl alcohol is oxidized to the corresponding carboxylic acid in a system of catalytic TEMPO and sodium hypochlorite and a stoichiometric amount of sodium chlorite.[7] TEMPO oxidations also exhibit chemoselectivity, being inert towards secondary alcohols, but the reagent will convert aldehydes to carboxylic acids.

In cases where secondary oxidizing agents cause side reactions, it is possible to stoichiometrically convert TEMPO to the oxoammonium salt in a separate step. For example, in the oxidation of geraniol to geranial, 4-acetamido-TEMPO is first oxidized to the oxoammonium tetrafluoroborate.[8]

TEMPO can also be employed in nitroxide mediated radical polymerization (NMP), a controlled free radical polymerization technique that allows better control over the final molecular weight distribution. The TEMPO free radical can be added to the end of a growing polymer chain, creating a "dormant" chain that stops polymerizing. However, the linkage between the polymer chain and TEMPO is weak, and can be broken upon heating, which then allows the polymerization to continue. Thus, the chemist can control the extent of polymerization and also synthesize narrowly distributed polymer chains.

Industrial applications

TEMPO itself is relatively inexpensive,[9] but there are TEMPO derivatives that are often used such as 4-hydroxy-TEMPO (TEMPOL)[10] or 4-acetamido-TEMPO that have cheaper precursors. Examples of TEMPO use in chemical industry are bisnoralcohol (a steroid) to bisnoraldehyde conversion by Upjohn and retinol to retinal conversion by Novartis. One industrial method employs H5PV2Mo10O40 as co-oxidant, the reduced form of which can be reoxidized by atmospheric oxygen. Polymer-supported TEMPO catalysts are also commercially available.[11]

References

  1. ↑ Barriga, S (2001). "2,2,6,6-Tetramethylpiperidine-1-oxyl (TEMPO)". Synlett (4): 563. doi:10.1055/s-2001-12332. 
  2. ↑ Lebedev, O. L.; Kazarnovskii, S. N. Zhur. Obshch. Khim. 1960, volume 30(5), pages 1631-1635.
  3. ↑ Montanari, F.; Quici, S.; Henry-Riyad, H.; Tidwell, T. T. "2,2,6,6-Tetramethylpiperidin-1-oxyl" Encyclopedia of Reagents for Organic Synthesis; John Wiley & Sons, 2005. doi:10.1002/047084289X.rt069.pub2
  4. ↑ Zanocco, A. L.; Canetem., A. Y.; Melendez, M. X. (2000). "A Kinetic Study of the Reaction between 2-p-methoxyphenyl-4-phenyl-2-oxazolin-5-one and 2,2,6,6-Tetramethyl-1-piperidinyl-n-oxide". Bol. Soc. Chil. Quím. 45: 123–129. doi:10.4067/S0366-16442000000100016. 
  5. ↑ Galli, Carlo "Nitroxyl radicals" in Chemistry of Hydroxylamines, Oximes and Hydroxamic Acids" 2009, part. 2, 705-750. John Wiley & Sons, Chichester. ISBN 978-0-470-51261-6.
  6. ↑ P. L. Anelli, F. Montanari, S. Quici, "A General Synthetic Method for the Oxidation of Primary Alcohols to Aldehydes: (S)-(+)-2-Methylbutanal", Org. Synth. ; Coll. Vol. 8: 367 
  7. ↑ Zhao, M. M.; Li, J.;Mano, E.; Song, Z. J.; Tschaen, D. M., "Oxidation of Primary Alcohols to Carboxylic Acids with Sodium Chlorite catalyzed by TEMPO and Bleach: 4-Methoxyphenylacetic Acid", Org. Synth. 81: 195 
  8. ↑ Bobbitt, J. M.; Merbouh, N., "2,6-Octadienal, 3,7-dimethyl-, (2E)-", Org. Synth. 82: 80 
  9. ↑ http://www.sigmaaldrich.com/catalog/product/aldrich/214000?lang=en&region=US
  10. ↑ http://www.sigmaaldrich.com/catalog/product/aldrich/176141?lang=en&region=US
  11. ↑ Ciriminna, R.; Pagliaro, M. (2010). "Industrial Oxidations with Organocatalyst TEMPO and Its Derivatives". Organic Process Research & Development 14: 245–251. doi:10.1021/op900059x. 
This article is issued from Wikipedia. The text is available under the Creative Commons Attribution/Share Alike; additional terms may apply for the media files.