Synare

From Wikipedia, the free encyclopedia

The Synare was a series of electronic drums made by Star Instruments in the mid-1970s through the 1980s. The Synare was a drum synthesizer, meaning it was essentially a synthesizer, but instead of being controlled by a keyboard, it was triggered by hitting rubber pads which were pressure-sensitive.

Models

The Synare 1

Four rubber rectangular pads connected to a main module with one oscillator producing pulse and sawtooth waveforms. It also had a white noise generator, Low Frequency Oscillator (LFO) with triangle and pulse waveforms, a mixer and a low-pass filter with Resonance and Cutoff controls. It also had an envelope generator with attack, decay, sustain, and release. Made from 1975 to 1981.

The Synare 2

This model was manufactured from 1976 to 1982 and was Star's flagship. It was very much like the Synare 1, with one oscillator providing sawtooth, pulse, or white noise. It added assignable functions, such as the ability to route the LFO in order to simultaneously modulate several parameters. The LFO also provided a sawtooth waveform. The pitch of the oscillator could set to a wide range of octaves, then fine tuned with a separate parameter. A major improvement over the Synare 1 was the introduction of a fairly advanced sequencer with multiple patterns, and the ability to change patterns and octaves on the fly. This model also featured sixteen pads rather than the four of the Synare 1. The retail price in 1976 was $1,395.00, and as a result the Synare 2 remains a very rare item.

The Synare 3

Noted for its 'flying saucer' appearance, this was the first affordable model for most musicians. As well as the ability to be run on batteries, the model featured 2 oscillators with no variable waveforms, a white-noise generator, as well as a sweep function, which could be used up or down to achieve a descending 'booming' sound which was used extensively in disco records of the era. Oscillator 1 was the noise generator with a 'tune' function. The amplifier section had volume, attack, and decay controls. This model also had a low-pass filter with cutoff, resonance and decay controls and was manufactured from 1977 to 1982.

The Synare S3X

Virtually the same machine as its predecessor, but with more flexible modulation controls. Manufactured during the same time as the Synare 3.

The Synare 4

Very similar to its predecessor, but with an actual drumhead rather than a rubber pad. Had modulation route and depth controls. Made from approximately 1979-1983. Very rare.

Notable Users

External links


This article is issued from Wikipedia. The text is available under the Creative Commons Attribution/Share Alike; additional terms may apply for the media files.