Sulfate

Sulfate
Systematic name Sulfate
Properties
Molecular formula	SO2− 4
Molar mass	96.07 g mol−1
Except where noted otherwise, data are given for materials in their standard state (at 25 °C, 100 kPa)
Infobox references

The sulfate ion is a polyatomic anion with the empirical formula SO₄²⁻. Sulfate is the spelling recommended by IUPAC, but sulphate is used in British English. Salts, acid derivatives, and peroxides of sulfate are widely used in industry. Sulfates occur widely in everyday life. Sulfates are salts of sulfuric acid and many are prepared from that acid.

Structure and bonding

The anion consists of a central sulfur atom surrounded by four equivalent oxygen atoms in a tetrahedral arrangement. The symmetry is the same as that of methane. The sulfur atom is in the +6 oxidation state while the four oxygen atoms are each in the −2 state. The sulfate ion carries a negative two charge and is the conjugate base of the bisulfate (or hydrogen sulfate) ion, HSO−
4, which is the conjugate base of H
2SO
4, sulfuric acid. Organic sulfate esters, such as dimethyl sulfate, are covalent compounds and esters of sulfuric acid.

The S-O bond length of 149 pm is shorter than expected for a S-O single bond. For example, the bond lengths in sulfuric acid are 157 pm for S-OH. The tetrahedral molecular geometry of the sulfate ion is as predicted by VSEPR theory.

Two models of the sulfate ion.
1 with polar covalent bonds only; 2 with an ionic bond

Six resonances

The first description of the bonding in modern terms was by Gilbert Lewis in his groundbreaking paper of 1916 where he described the bonding in terms of electron octets around each atom, that is no double bonds and a formal charge of 2+ on the sulfur atom.^[1]

Later, Linus Pauling used valence bond theory to propose that the most significant resonance canonicals had two π bonds involving d orbitals. His reasoning was that the charge on sulfur was thus reduced, in accordance with his principle of electroneutrality.^[2] The double bonding was taken by Pauling to account for the shortness of the S-O bond (149 pm). Pauling's use of d orbitals provoked a debate on the relative importance of π bonding and bond polarity (electrostatic attraction) in causing the shortening of the S-O bond. The outcome was a broad consensus that d orbitals play a role, but are not as significant as Pauling had believed.^[3][4]

Double bonds in the Pauling structure imply a molecular orbital formed from 3d orbitals on sulfur and 2p orbitals on oxygen. A widely accepted description involving pπ - dπ bonding was initially proposed by D.W.J. Cruickshank. In this model, fully occupied p orbitals on oxygen overlap with empty sulfur d orbitals (principally the d_z² and d_x²-y²).^[5] However, in this description, despite there is some π character to the S-O bonds, the bond has significant ionic character. For sulfuric acid, computational analysis (with natural bond orbitals) confirms a clear positive charge on sulfur (theoretically +2.45) and a low 3d occupancy. Therefore, the representation with four single bonds is the optimal Lewis structure rather than the one with two double bonds (thus the Lewis model, not the Pauling model).^[6] In this model, the structure obeys the octet rule and the charge distribution is in agreement with the electronegativity of the atoms. The shorter S-O bonds have a different explanation . However, the bonding representation of Pauling for sulfate and other main group compounds with oxygen is still a common way of representing the bonding in many textbooks.^[5][7]

The apparent contradiction can be cleared if one realizes that the covalent double bonds in the Lewis structure in reality represent bonds that are strongly polarized by more than 90% towards the oxygen atom. On the other hand, in the structure with an ionic bond, the charge is localized as a lone pair on the oxygen.^[6]

Preparation

Methods of preparing metal sulfates include:^[7]

• treating metal, metal hydroxide or metal oxide with sulfuric acid
• oxidation of metal sulfides or sulfites

Properties

Many examples of ionic sulfates are known, and many of these are highly soluble in water. Exceptions include calcium sulfate, strontium sulfate, lead(II) sulfate, and barium sulfate, which are poorly soluble. Radium sulfate is the most insoluble sulfate known. The barium derivative is useful in the gravimetric analysis of sulfate: if one adds a solution of, perhaps, barium chloride to a solution containing sulfate ions. The appearance of a white precipitate, which is barium sulfate, indicates that sulfate anions are present.

The sulfate ion can act as a ligand attaching either by one oxygen (monodentate) or by two oxygens as either a chelate or a bridge.^[7] An example is the neutral metal complex PtSO₄(P(C₆H₅)₃)₂ where the sulfate ion is acting as a bidentate ligand. The metal-oxygen bonds in sulfate complexes can have significant covalent character.

Uses and occurrence

Commericial applications

Sulfates are widely used industrially. Major compounds include:

• Gypsum, the natural mineral form of hydrated calcium sulfate, is used to produce plaster. About 100 Mtons/y are used by the construction industry.
• Copper sulfate, a common algaecide
• Iron sulfate, a common form of iron in mineral supplements for humans, animals, and soil for plants
• Magnesium sulfate (commonly known as Epsom salts), used in therapeutic baths
• Sodium laureth sulfate, or sodium lauryl ether sulfate (SLES), a detergent and surfactant found in many personal care products (soaps, shampoos, toothpaste etc.)
• Lead(II) sulfate, used with sulfuric acid in a lead–acid battery

Occurrence in nature

Sulfate-reducing bacteria, some anaerobic microorganisms, such as those living in sediment or near deep sea thermal vents, use the reduction of sulfates coupled with the oxidation of organic compounds or hydrogen as an energy source for chemosynthesis.

History

Some sulfates were known to alchemists. The vitriol salts, from the Latin vitreolum, glassy, were so-called because they were some of the first transparent crystals known.^[8] Green vitriol is ferrous sulfate heptahydrate, FeSO₄·7H₂O; blue vitriol is copper sulfate pentahydrate, CuSO₄·5H₂O and white vitriol is zinc sulfate heptahydrate, ZnSO₄·7H₂O. Alum, a double sulfate with the formula K₂Al₂(SO₄)₄·24H₂O, figured in the development of the chemical industry.

Environmental effects

Sulfates occur as microscopic particles (aerosols) resulting from fossil fuel and biomass combustion. They increase the acidity of the atmosphere and form acid rain. The anaerobic sulfate-reducing bacteria Desulfovibrio desulfuricans and D. vulgaris can remove the black sulfate crust that often tarnishes buildings.^[9]

Main effects on climate

Sulfate aerosol optical thickness 2005 to 2007 average

The main direct effect of sulfates on the climate involves the scattering of light, effectively increasing the Earth's albedo. This effect is moderately well understood and leads to a cooling from the negative radiative forcing of about 0.4 W/m² relative to pre-industrial values,^[10] partially offsetting the larger (about 2.4 W/m²) warming effect of greenhouse gases. The effect is strongly spatially non-uniform, being largest downstream of large industrial areas.

The first indirect effect is also known as the Twomey effect. Sulfate aerosols can act as cloud condensation nuclei and this leads to greater numbers of smaller droplets of water. Lots of smaller droplets can diffuse light more efficiently than just a few larger droplets.

The second indirect effect is the further knock-on effects of having more cloud condensation nuclei. It is proposed that these include the suppression of drizzle, increased cloud height,^[11] to facilitate cloud formation at low humidities and longer cloud lifetime.^[12] Sulfate may also result in changes in the particle size distribution, which can affect the clouds radiative properties in ways that are not fully understood. Chemical effects such as the dissolution of soluble gases and slightly soluble substances, surface tension depression by organic substances and accommodation coefficient changes are also included in the second indirect effect.^[13]

The indirect effects probably have a cooling effect, perhaps up to 2 W/m², although the uncertainty is very large.^[14] Sulfates are therefore implicated in global dimming, which may have acted to offset some of the effects of global warming.

Hydrogen sulfate (bisulfate)

Hydrogen sulfate
(bisulfate)

The conjugate base of sulfuric acid (H₂SO₄)—a dense, colourless, oily, corrosive liquid—is the hydrogen sulfate or bisulfate ion (HSO₄⁻). Sulfuric acid is a very strong acid; in aqueous solutions it ionizes completely to form hydronium ions (H₃O⁺) and hydrogen sulfate (HSO₄⁻). In other words, the sulfuric acid behaves as a Brønsted-Lowry acid and is deprotonated. Bisulfate has a molar mass of 97.078 g/mol. It has a valency of 1. An example of a salt containing the HSO₄⁻ group is sodium bisulfate, NaHSO₄. In dilute solutions the hydrogen sulfate ions also dissociate, forming more hydronium ions and sulfate ions (SO₄²⁻).

Other sulfur oxyanions

See also

Wikimedia Commons has media related to sulfates.

• Sulfonate

References