Accessible surface area

From Wikipedia, the free encyclopedia
Illustration of the solvent accessible surface in comparison to the van der Waals surface. The van der Waals surface as given by the atomic radii is shown in red. The accessible surface is drawn with dashed lines and is created by tracing the center of the probe sphere (in blue) as it rolls along the van der Waals surface. Note that the probe radius depicted here is of smaller scale than the typical 1.4Å.

The accessible surface area (ASA) or solvent-accessible surface area (SASA) is the surface area of a biomolecule that is accessible to a solvent. Measurement of ASA is usually described in units of square ångstroms (a standard unit of measurement in molecular biology). ASA was first described by Lee & Richards in 1971 and is sometimes called the Lee-Richards molecular surface.[1] ASA is typically calculated using the 'rolling ball' algorithm developed by Shrake & Rupley in 1973.[2] This algorithm uses a sphere (of solvent) of a particular radius to 'probe' the surface of the molecule.

Methods of calculating ASA

Shrake-Rupley algorithm

The Shrake-Rupley algorithm is a numerical method that draws a mesh of points equidistant from each atom of the molecule and uses the number of these points that are solvent accessible to determine the surface area.[2] The points are drawn at a water molecule's estimated radius beyond the van der Waals radius, which is effectively similar to ‘rolling a ball’ along the surface. All points are checked against the surface of neighboring atoms to determine whether they are buried or accessible. The number of points accessible is multiplied by the portion of surface area each point represents to calculate the ASA. The choice of the 'probe radius' does have an effect on the observed surface area, as using a smaller probe radius detects more surface details and therefore reports a larger surface. A typical value is 1.4Å, which approximates the radius of a water molecule. Another factor that affects the results is the definition of the VDW radii of the atoms in the molecule under study. For example, the molecule may often lack hydrogen atoms which are implicit in the structure. The hydrogen atoms may be implicitly included in the atomic radii of the 'heavy' atoms, with a measure called the 'group radii'. In addition, the number of points created on the van der Waals surface of each atom determines another aspect of discretization, where more points provide an increased level of detail.

LCPO method

The LCPO method uses a linear approximation of the two-body problem for a quicker analytical calculation of ASA.[3] The approximations used in LCPO result in an error in the range of 1-3 Ų.

Power Diagram method

Recently a method was presented that calculates ASA fast and analytically using a power diagram.[4]

Applications

Accessible surface area is often used when calculating the transfer free energy required to move a biomolecule from aqueous solvent to a non-polar solvent such as a lipid environment. The LCPO method is also used when calculating implicit solvent effects in the molecular dynamics software package AMBER.

It is recently suggested that (predicted) accessible surface area can be used to improve prediction of protein secondary structure.[5][6]

Relation to solvent-excluded surface

The ASA is closely related to the concept of the solvent-excluded surface (also known as the molecular surface or Connolly surface), which is imagined as a cavity in bulk solvent (effectively the inverse of the solvent-accessible surface). It is also calculated in practice via a rolling-ball algorithm developed by Frederic Richards[7] and independently implemented three-dimensionally by Michael Connolly in 1983[8] and Tim Richmond in 1984.[9] Connolly spent several more years perfecting the method.[10]

See also

Notes

  1. ↑ Lee, B; Richards, FM. (1971). "The interpretation of protein structures: estimation of static accessibility". J Mol Biol 55 (3): 379–400. doi:10.1016/0022-2836(71)90324-X. PMID 5551392. 
  2. ↑ 2.0 2.1 Shrake, A; Rupley, JA. (1973). "Environment and exposure to solvent of protein atoms. Lysozyme and insulin". J Mol Biol 79 (2): 351–71. doi:10.1016/0022-2836(73)90011-9. 
  3. ↑ Weiser J, Shenkin PS, Still WC (1999). "Approximate atomic surfaces from linear combinations of pairwise overlaps (LCPO)". Journal of Computational Chemistry 20 (2): 217–230. doi:10.1002/(SICI)1096-987X(19990130)20:2<217::AID-JCC4>3.0.CO;2-A. 
  4. ↑ Klenin K, Tristram F, Strunk T, Wenzel W (2011). "Derivatives of molecular surface area and volume: Simple and exact analytical formulas". Journal of Computational Chemistry 32 (12): 2647–2653. 
  5. ↑ Momen-Roknabadi, A; Sadeghi, M; Pezeshk, H; Marashi, SA (2008). "Impact of residue accessible surface area on the prediction of protein secondary structures". BMC Bioinformatics 9: 357. doi:10.1186/1471-2105-9-357. PMC 2553345. PMID 18759992. 
  6. ↑ Adamczak, R; Porollo, A; Meller, J. (2005). "Combining prediction of secondary structure and solvent accessibility in proteins". Proteins 59 (3): 467–75. doi:10.1002/prot.20441. PMID 15768403. 
  7. ↑ Richards, FM. (1977). "Areas, volumes, packing and protein structure". Annu Rev Biophys Bioeng 6: 151–176. doi:10.1146/annurev.bb.06.060177.001055. PMID 326146. 
  8. ↑ Connolly, M. L. (1983). "Analytical molecular surface calculation". J Appl Cryst 16 (5): 548–558. doi:10.1107/S0021889883010985. 
  9. ↑ Richmond, T. J. (1984). "Solvent accessible surface area and excluded volume in proteins. Analytical equations for overlapping spheres and implications for the hydrophobic effect". J Mol Biol 178 (1): 63–89. doi:10.1016/0022-2836(84)90231-6. 
  10. ↑ Connolly, M. L. (1993). "The molecular surface package". J Mol Graphics 11 (2): 139–141. doi:10.1016/0263-7855(93)87010-3. 

References

  • Connolly, M. L. (1983). "Solvent-accessible surfaces of proteins and nucleic-acids". Science 221: 709–713. doi:10.1126/science.6879170. 
  • Richmond, Timothy J. (1984). "solvent accessible surface area and excluded volume in proteins". J. Mol. Biol. 178: 63–89. doi:10.1016/0022-2836(84)90231-6. 
  • Connolly, Michael L. (1985). "Computation of molecular volume". J. Amer. Chem. Soc. 107 (5): 118–1124. doi:10.1021/ja00291a006. 
  • Connolly, M. L. (1991). "Molecular interstitial skeleton". Computers and Chemistry 15 (1): 37–45. doi:10.1016/0097-8485(91)80022-E. 
  • Sanner, M.F. (1992). Modelling and Applications of Molecular Surfaces (PhD thesis). 
  • Connolly, M. L. (1992). "Shape distributions of protein topography". Biopolymers 32 (9): 1215–1236. doi:10.1002/bip.360320911. 
  • Blaney, J. M. (1994). Distance Geometry in Molecular Modeling. Rev. Comput. Chem. doi:10.1002/9780470125823.ch6. 
  • Grant, J. A.; Pickup, B. T. (1995). "A Gaussian description of molecular shape". J. Phys. Chem. 99: 3503–3510. doi:10.1021/j100011a016. 
  • Boissonnat, J.-D.; et al. (1994). Computing Connolly Surfaces. 
  • Petitjean, M (1994). "On the Analytical Calculation of van der Waals Surfaces and Volumes: Some Numerical Aspects". J. Comput. Chem. 15 (5). pp. 507–523. doi:10.1002/jcc.540150504. 
  • Connolly, M. L.; et al. (1996). Molecular Surfaces: A Review. 
  • Lin, S. L. (1994). "Molecular surface representations by sparse critical points". Proteins 18: 94–101. doi:10.1002/prot.340180111. 
  • Connolly, M. L.; et al. (2001). Molecular Surfaces: Calculations, Uses and Representations. 
  • Gerstein, M; Richards, F.S. (2001). "Protein geometry: Volumes, areas and distances". CiteSeerX: 10.1.1.134.2539. 
  • Voss, N. R. (2006). "The geometry of the ribosomal polypeptide exit tunnel". J. Mol. Biol. 360 (4): 893–906. doi:10.1016/j.jmb.2006.05.023. 
  • Leach, A. (2001). Molecular Modelling: Principles and Applications (2nd ed.). p. 7. 
  • Busa, Jan; Dzurina, Jozef; Hayryan, Edik (2005). "ARVO: A fortran package for computing the solvent accessible surface area and the excluded volume of overlapping spheres via analytic equations". Comp. Phys. Commun. 165: 59–96. doi:10.1016/j.cpc.2004.08.002. 

External links

This article is issued from Wikipedia. The text is available under the Creative Commons Attribution/Share Alike; additional terms may apply for the media files.