Secondary emission

From Wikipedia, the free encyclopedia

Visualisation of a Townsend avalanche, which is sustained by the generation of secondary electrons in an electric field

Secondary emission in physics is a phenomenon where primary incident particles of sufficient energy, when hitting a surface or passing through some material, induce the emission of secondary particles. The primary particles are often charged particles like electrons or ions. If the secondary particles are electrons, the effect is termed secondary electron emission.^[1] In this case, the number of secondary electrons emitted per incident particle is called secondary emission yield. If the secondary particles are ions, the effect is termed secondary ion emission.

Applications

Secondary emissive materials

Commonly used secondary emissive materials include

alkali antimonide
beryllium oxide (BeO)
magnesium oxide (MgO)
gallium phosphide (GaP)
gallium arsenide phosphide (GaAsP)
lead oxide (PbO)

Photo multipliers and similar devices

In a photomultiplier tube,^[2] one or more electrons are emitted from a photocathode and accelerated towards a polished metal electrode (called a dynode). They hit the electrode surface with sufficient energy to release a number of electrons through secondary emission. These new electrons are then accelerated towards another dynode, and the process is repeated several times, resulting in an overall gain ('electron multiplication') in the order of typically one million and thus generating an electronically detectable current pulse at the last dynodes.

Similar electron multipliers can be used for detection of fast particles like electrons or ions

Historic applications

The display on an oscilloscope at normal intensity.

The same tube with greater intensity. The disk around the dot in the center is due to secondary emission. Electrons are struck off the screen and travel backwards into the tube. The voltage across the tube causes them to be accelerated forward again, striking the screen over a wide area.^{[citation needed]}

Special amplifying tubes

In the 1930s special amplifying tubes were developed which deliberately "folded" the electron beam, by having it strike a dynode to be reflected into the anode. This had the effect of increasing the plate-grid distance for a given tube size, increasing the transconductance of the tube and reducing its noise figure. A typical such "orbital beam hexode" was the RCA 1630, introduced in 1939. Because the heavy electron current in such tubes damaged the dynode surface rapidly, their lifetime tended to be very short compared to conventional tubes.

Early computer memory tubes

The first random access computer memory used a type of cathode ray tube called the Williams tube that used secondary emission to store bits on the tube face. Another random access computer memory tube based on secondary emission was the Selectron tube. Both were made obsolete by the invention of magnetic core memory.

Undesirable effects - the tetrode

Secondary emission can be undesirable such as in the tetrode thermionic valve (tube). In this instance the positively charged screen grid can accelerate the electron stream sufficiently to cause secondary emission at the anode (plate). This can give rise to excessive screen grid current. It is also partly responsible for this type of valve (tube), particularly early types with anodes not treated to reduce secondary emission, exhibiting a 'negative resistance' characteristic, which could cause the tube to become unstable. This side effect could be put to use by using some older valves (e.g., type 77 pentode) as dynatron oscillators. This effect was prevented by adding a third grid to the tetrode, called the suppressor grid, to repel the electrons back toward the plate. This tube was called the pentode.

References

↑ R. Kollath, Secondary electron emission of solids irradiated by electrons, Encyclopedia of Physics (ed. S. Flügge) Vol. 21, p. 232 - 303 (1956, in German)
↑ H. Semat, J.R. Albright, Introduction to Atomic and Nuclear Physics, 5th ed., ch. 4.12, Chapman and Hall, London (1972)

v t e Branches of physics

Divisions	Applied physics Experimental physics Theoretical physics

Energy and motion	Classical mechanics Lagrangian mechanics Hamiltonian mechanics Continuum mechanics Celestial mechanics Statistical mechanics Thermodynamics Fluid mechanics Quantum mechanics

Waves and fields	Gravitation Electromagnetism Quantum field theory Relativity Special relativity General relativity

Physical sciences and mathematics	Accelerator physics Acoustics Astrophysics Heliophysics Nuclear astrophysics Solar physics Space physics Stellar physics Atomic, molecular, and optical physics Chemical physics Computational physics Condensed matter physics Solid-state physics Digital physics Engineering physics Material physics Mathematical physics Nuclear physics Optics Geometric optics Nonlinear optics Physical optics Quantum optics Particle physics Astroparticle physics Phenomenology Plasma Polymer physics Statistical physics

Physics and biology / geology / economics	Biophysics Biomechanics Medical physics Neurophysics Agrophysics Soil physics Atmospheric physics Econophysics Geophysics Psychophysics

This article is issued from Wikipedia. The text is available under the Creative Commons Attribution/Share Alike; additional terms may apply for the media files.