Saxon VIII 1
Saxon VIII 1 | |
---|---|
Quantity | 8 |
Manufacturer | n.k. |
Entered service | 1870 |
Retired | by 1922 |
Wheel arrangement | 4-4-0 |
Axle arrangement | 2'B |
Length over buffers | n.k. |
Ø Driving wheel | 1,830 mm |
Ø Leading wheel | 990 mm |
Top speed | 70 km/h |
Boiler overpressure | 8.5 kp/cm² 83.4 kN/cm² |
Piston stroke | 560 mm |
Cylinder bore | 406 mm |
Grate area | 1.32 m² |
Evaporative heating area | 93.2 m² |
Power | n.k. |
Average axle load | 10.2 Mp 100.0 kN |
Adhesive weight | 20.3 Mp 199.1 kN |
Service weight | 36.8 Mp 360.9 kN |
Brake | Westinghouse brake Schleiferbremsen |
The Saxon Class VIII 1 were early German 4-4-0 steam locomotives built for the Royal Saxon State Railways (Königlich Sächsische Staats-Eisenbahn) for express train services. The engines were deployed on the railway route between Dresden and Chemnitz.
They were based on a prototype from Württemberg. They were fitted with an American bogie and had a high outer firebox instead of the second steam dome. As a result the boiler was also pitched higher.
These locomotives were over 50 years old when they were retired around 1922 by the Deutsche Reichsbahn before being given a new classification.
Literature
Spielhoff, Lothar, Länderbahn-Dampf-Lokomotiven. Band 1: Preußen, Mecklenburg, Oldenburg, Sachsen und Elsaß-Lothringen, Franckh'sche Verlagshandlung, Stuttgart, 1990, ISBN 3-440-06145-0
See also
- Royal Saxon State Railways
- List of Saxon locomotives and railbuses
External links
- There is a relevant English-language forum at Railways of Germany
|