Sagitta (geometry)

From Wikipedia, the free encyclopedia

Visualization of the sagitta

In geometry, the sagitta of a circular arc is the distance from the center of the arc to the center of its base.^[1] It is used extensively in architecture when calculating the arc necessary to span a certain height and distance and also in optics where it is used to find the depth of a spherical mirror or lens. The name comes directly from Latin sagitta, meaning an arrow.

Look up sagitta in Wiktionary, the free dictionary.

Formulas

In the following equations, $s$ denotes the sagitta (the depth of the arc), $r$ equals the radius of the circle, and $\ell$ half the length of the chord spanning the base of the arc. The sagitta may be calculated from these quantities as

$s=r-{\sqrt {r^{2}-\ell ^{2}}}$ .

The sagitta may also be calculated from the versine function, for an arc that spans an angle of $\theta$ , and coincides with the versine for unit circles:

$s=r\operatorname {versin}{\frac {\theta }{2}}=r\left(1-\cos {\frac {\theta }{2}}\right)$ .

Alternatively, the Pythagorean theorem

$r^{2}=\ell ^{2}+(r-s)^{2}$

may be rearranged to give a formula for the radius as a function of the sagitta and half-chord length:

$r={\frac {s^{2}+\ell ^{2}}{2s}}$ .

Also, this can also be rearranged to find the length of the half-chord.

$\ell ={\sqrt {2rs-s^{2}}}$ .

Approximation

When the sagitta is small in comparison to the radius, it may be approximated by the formula

$s\approx {\frac {\ell ^{2}}{2r}}$ .^[1]

Alternatively, if the sagitta is small and the sagitta, radius, and half-chord length are known, they may be used to estimate the arc length by the formula

$a\approx \ell +{\frac {s^{2}}{r}}$ ,

where $a$ is half the length of the arc; this formula was known to the Chinese mathematician Shen Kuo, and a more accurate formula also involving the sagitta was developed two centuries later by Guo Shoujing.^[2]

Applications

Architects, engineers, and contractors use these equations to create "flattened" arcs that are used in curved walls, arched ceilings, bridges, and numerous other applications.

The sagitta also has uses in physics where it is used, along with chord length, to calculate the radius of curvature of an accelerated particle. This is used especially in bubble chamber experiments where it is used to determine the momenta of decay particles.

References

↑ 1.0 1.1 Woodward, Ernest (1978), Geometry - Plane, Solid & Analytic Problem Solver, Research & Education Assoc., p. 359, ISBN 9780878915101 .
↑ Needham, Joseph (1959), Science and Civilisation in China: Volume 3, Mathematics and the Sciences of the Heavens and the Earth, Cambridge University Press, p. 39, ISBN 9780521058018 .

External links

Calculating the Sagitta of an Arc

This article is issued from Wikipedia. The text is available under the Creative Commons Attribution/Share Alike; additional terms may apply for the media files.