Rotary snowplow

From Wikipedia, the free encyclopedia
This article is about the railway equipment. For the automotive snow clearer, see snow blower.
A rotary snowplow from the Oregon Short Line on display at the Mid Continent Railway Museum in North Freedom, WI.

A rotary snowplow is a piece of railroad snowfighting equipment. It is characterized by the large circular set of blades on its front end that rotate as a unit to cut through the snow on the track ahead of it. The precursor to the rotary snowplow was the wedge snowplow.

History

The rotary was invented by Toronto, Ontario, Canada dentist J.W. Elliot in 1869, however he never built a working model or prototype.[1] Orange Jull of Orangeville, Ontario, expanded on Elliot's design, building working models he tested with sand. During the winter of 1883-1884, Jull contracted with the Leslie Brothers of Toronto to build a full-size prototype that proved successful. Jull later sold his design rights to Leslie Brothers, who formed the Rotary Steam Shovel Manufacturing Company in Paterson, New Jersey. Leslie Brothers contracted with Cooke Locomotive & Machine Works in Paterson to do the actual construction.[2]

Operation

Wedge snowplows were the traditional mechanized method of clearing snow from railroad tracks. These pushed snow off the tracks, deflecting it to the side. Deeper drifts cannot be easily cleared by this method; there is simply too much snow to be moved. For this purpose, the rotary snowplow was devised.

A rotary snowplow at work in New Ulm, Minnesota.
Operational rotary snowplow Xrotd 9213 of Rhaetian Railway

When snow is too deep, the railroads call on their rotary. The plow is not self-propelled, so one or more locomotives are coupled behind it to push the plow along the line. An engine within the plow's carbody rotates the large circular assembly at the front of the plow. The blades on this wheel cut through the snow and force it through a channel just behind the disk to an output chute above the blade assembly.

The chute can be adjusted to throw the snow to either the left or the right side of the tracks. An operator sits in a cab just above and behind the blade assembly to control the speed of the blades and the direction of output from the chute. With the advent of dieselization, MU controls have been added to the cabs, so that the pushing locomotives can be controlled from the plow.

In areas of particularly deep snowfall, such as California's Donner Pass, railroads sometimes would create a train consisting of a rotary snowplow at each end (with the blade ends pointing away from each other), and two or three locomotives coupled between them. With a plow on each end, the train would be able to get itself back to its starting location even if the snow covered the tracks it had just passed over. Such a train would also be able to efficiently clear multiple track mainlines as it could make a pass in one direction on one track and then reverse direction and clear the next track. This practice became standard for the Southern Pacific Railroad on Donner Pass following the January 1952 stranding of the City of San Francisco; during attempts to clear the avalanches that had trapped the train, two rotary plows were themselves trapped by avalanches, and the crew of a third was killed when their plow was hit by an avalanche.

Rotary snowplows are expensive due to their high maintenance costs, which the railroad incurs regardless of whether they are needed in a given year. As a result, most railroads have eliminated their rotaries, preferring to use a variety of types of fixed-blade plows that have significantly lower maintenance costs, in conjunction with bulldozers, which can be used year-round on maintenance-of-way projects. In addition, because rotaries leave an open-cut in the snowbank that fixed-blade plows cannot push snow past, once rotaries have been used, they must be used for all further significant snowfalls until the snowbank has melted. Since rotaries, which need some form of fuel to power the blades, also cost more to operate than fixed-blade plows, they are now generally considered to be a "weapon of last resort" for the railroads that own them; they are only used when snow is too deep or heavy for fixed-blade plows.

The few remaining rotary plows in North America are either owned by museum railroads, or are kept in reserve for areas with poor road access and routine severe snowfall conditions; the largest remaining fleet of rotaries consists of Union Pacific Railroad's six ex-Southern Pacific plows reserved for Donner Pass. Japan sees widespread use of rotary snowplows in its many mountainous passes.

Power

Early rotaries had steam engines inside their carbodies to power the blades; a few are still in working order, and in particular one on the White Pass & Yukon Route in Alaska performs annual demonstration runs through thick snow for the benefit of photographers and enthusiasts. Newer constructed rotaries are either diesel or electric powered; in the latter case, an electric supply is required. Many steam plows were converted. Some electric plows can take their power from a locomotive, while others are semi-permanently coupled to power units, generally old locomotives with their traction motors removed; these are colloquially called "snails." (This is derived from the fact that engineless but motored units that take their power from another locomotive are "slugs" - thus the opposite, with engine but no motors, is a "snail.")

Induction in to the North America Railway Hall of Fame

In 2001, the Rotary Snowplow was inducted into the North America Railway Hall of Fame. The hall of fame recognizes and establishes and enduring tribute to the people and things that have made significant contribution relating to railway industry in North America. The Rotary Snowplow was inducted in the "Technical Innovations" category with "National" significance.

Preservation

Southern Pacific rotary snowplow MW208 is preserved in operational condition at the Western Pacific Railroad Museum at Portola, California. This rotary was involved in the 1952 City of San Francisco rescue.

The Lake Superior Railroad Museum in Duluth, Minnesota and the Museum of Transportation in St. Louis, Missouri each have one on display.

The Northern Pacific Rotary 10 steam snowplow built in November, 1907 is currently owned by the Northwest Railway Museum and is on display in Snoqualmie, Washington.

Rhaetian Railway still have one of their rotary snowplows in operating condition. It is mainly used on show runs for photographers, but when there's lots of snow it is still used to clear the Bernina line.

Union Pacific Railroad's UP 900860 rotary snowplow currently rests at Union Station in Ogden, Utah. The snowplow is not in operable condition. Unit number 900081 is displayed at the Museum of Transportation in St. Louis, Missouri.

The Henschel rotary steam snowplow ÖBB 986.101 is preserved in not operational condition at the Deutsches Technikmuseum Berlin in Germany. It was built in 1943.

  • Northern Pacific Rotary 10 steam snowplow with tender

  • Northern Pacific Rotary 10 steam snowplow

  • Northern Pacific Rotary 10 steam snowplow from front end

  • White Pass and Yukon Rotary Snow Plow No.1

  • ÖBB 986.101 rotary steam snowplow (Austrian Federal Railways)

See also

Notes

  1. ↑ http://www.collectionscanada.gc.ca/trains/kids/021007-5090-e.html The Rotary Snowplow - A Canadian Invention!]
  2. ↑ "The Leslie Brothers and Their Giant Snowblower" author Paul Swanson, January 1987 Trains Magazine

Further reading

External links

Wikimedia Commons has media related to Railway rotary snowplows.
Rail transport freight rolling stock
Enclosed equipment
Open equipment
Non-revenue equipment
This article is issued from Wikipedia. The text is available under the Creative Commons Attribution/Share Alike; additional terms may apply for the media files.