Pyrene
| Pyrene | |
|---|---|
 | |
 | |
| IUPAC name pyrene | |
| Other names benzo[def]phenanthrene | |
| Identifiers | |
| CAS number | 129-00-0  |
| PubChem | 31423 |
| ChemSpider | 29153 |
| KEGG | C14335 |
| ChEBI | CHEBI:39106 |
| ChEMBL | CHEMBL279564 |
| RTECS number | UR2450000 |
| Jmol-3D images | Image 1 |
| |
| |
| Properties | |
| Molecular formula | C16H10 |
| Molar mass | 202.25 g/mol |
| Appearance | colorless solid
(yellow impurities are often found at trace levels in many samples). |
| Density | 1.271 g/ml |
| Melting point | 145-148 °C (418-421 K) |
| Boiling point | 404 °C (677 K) |
| Solubility in water | 0.135 mg/l |
| Hazards | |
| MSDS | External MSDS |
| R-phrases | 36/37/38-45-53 |
| S-phrases | 24/25-26-36 |
| Main hazards | irritant |
| NFPA 704 |
 1
2
0
|
| Flash point | non-flammable |
| Related compounds | |
| Related PAHs | benzopyrene |
| Supplementary data page | |
| Structure and properties |
n, εr, etc. |
| Thermodynamic data |
Phase behaviour Solid, liquid, gas |
| Spectral data | UV, IR, NMR, MS |
(verify) (what is: / ?)Except where noted otherwise, data are given for materials in their standard state (at 25 °C (77 °F), 100 kPa) | |
| Infobox references | |
Pyrene is a polycyclic aromatic hydrocarbon (PAH) consisting of four fused benzene rings, resulting in a flat aromatic system. The chemical formula is C
16H
10. This colorless solid is the smallest peri-fused PAH (one where the rings are fused through more than one face). Pyrene forms during incomplete combustion of organic compounds.
Occurrence and reactivity
Pyrene was first isolated from coal tar, where it occurs up to 2% by weight. As a peri-fused PAH, pyrene is much more resonance-stabilized than its five-member-ring containing isomer fluoranthene. Therefore, it is produced in a wide range of combustion conditions. For example, automobiles produce about 1 μg/km.[1]
Oxidation with chromate affords perinaphthenone and then naphthalene-1,4,5,8-tetracarboxylic acid. It undergoes a series of hydrogenation reactions, and it is susceptible to halogenation, Diels-Alder additions, and nitration, all with varying degrees of selectivity.[1]
Applications
Pyrene and its derivatives are used commercially to make dyes and dye precursors, for example pyranine and naphthalene-1,4,5,8-tetracarboxylic acid. Its derivatives are also valuable molecular probes via fluorescence spectroscopy, having a high quantum yield and lifetime (0.65 and 410 nanoseconds, respectively, in ethanol at 293 K). Its fluorescence emission spectrum is very sensitive to solvent polarity, so pyrene has been used as a probe to determine solvent environments. This is due to its excited state having a different, non-planar structure than the ground state. Certain emission bands are unaffected, but others vary in intensity due to the strength of interaction with a solvent.
Safety
Although it is not as problematic as benzopyrene, animal studies have shown pyrene is toxic to the kidneys and the liver.
See also
References
- ↑ 1.0 1.1 Selim Senkan and Marco Castaldi "Combustion" in Ullmann's Encyclopedia of Industrial Chemistry, 2003 Wiley-VCH, Weinheim. Article Online Posting Date: March 15, 2003.
- Birks, J. B. (1969). Photophysics of Aromatic Molecules. London: Wiley.
- Valeur, B. (2002). Molecular Fluorescence: Principles and Applications. New York: Wiley-VCH.
- Birks, J.B. (1975). Eximers. london: Reports on Progress in Physics.
- Fetzer, J. C. (2000). The Chemistry and Analysis of the Large Polycyclic Aromatic Hydrocarbons. New York: Wiley.
External links
| |||||||||||||||||