1,2,4-Trihydroxyanthraquinone

From Wikipedia, the free encyclopedia
1,2,4-Trihydroxyanthraquinone
IUPAC name

1,2,4-trihydroxyanthracene-9,10-dione

Other names

Purpurin(e), Hydroxylizaric acid

Identifiers
CAS number 81-54-9 N
PubChem 6683
ChemSpider 6431 YesY
KEGG C10395 YesY
ChEBI CHEBI:8645 YesY
ChEMBL CHEMBL294264 YesY
Jmol-3D images Image 1
Image 2
Properties
Molecular formula C14H8O5
Molar mass 256.21 g/mol
Melting point 259 °C; 498 °F; 532 K ([1])
 N (verify) (what is: YesY/N?)
Except where noted otherwise, data are given for materials in their standard state (at 25 °C (77 °F), 100 kPa)
Infobox references

1,2,4-Trihydroxyanthraquinone, commonly called purpurin, is an anthraquinone. It is a naturally occurring red/yellow dye. It is formally derived from 9,10-anthraquinone by replacement of three hydrogen atoms by hydroxyl (OH) groups.

Purpurin is also called verantin, smoke Brown G, hydroxylizaric acid, and C.I. 58205. It is a minor component of the classical lake pigment "madder lake" or Rose Madder.

History

Madder root has been used for dying cloth at least since 1500 BC.[2] Purpurin and alizarin were isolated from the root by Pierre Robiquet and Colin, two French chemists, in 1826. They were identified as anthracene derivatives by Gräbe and Liebermann in 1868. They also synthesized alizarin from bromoanthraquinone, which, together with the conversion of alizarin into purpurin published previously by M. F. De Lalande, provided the first synthetic route to purpurin.[3] The positions of the OH groups were determined by Bayer and Caro in 1874–1875.[4]

Natural occurrence

Purpurin occurs in the roots of the madder plant (Rubia tinctorum), together with alizarin (1,2-dihydroxyanthraquinone). The root actually contains colorless glycosides of the dyes.

Properties

Purpurin is a crystalline solid, that forms orange needles melting at 259 °C,[5] but becomes red when dissolved in ethanol, and yellow when dissolved with alkalis in boiling water. It is insoluble in hexane but soluble in chloroform, and can be obtained from chloroform as reddish needles.[6] Unlike alizarin, purpurin is dissolved by boiling in a solution of aluminum sulfate, from which it can be precipitated by acid. This procedure can be used to separate the two dyes.[7]

Like many dihydroxy- and trihydroxyanthraquinones, pupurin has a purgative action, although only 1/20 as effective as 1,2,7-trihidroxyanthraquinone (anthrapurpurin).[8]

Uses

Purpurin is a fast dye for cotton printing and forms complexes with various metal ions. However it fades faster than alizarin on exposure to sunlight.[2]

A study in published in Nature suggests that the purpurin could replace cobalt in lithium-ion batteries.[9] Eliminating cobalt would mean eliminating a hazardous material, allow batteries to be produced at room temperature, and lower the cost of recycling batteries. Extracting purpurin from farmed madder is a simple task; alternately, the chemical could be synthesized in a lab.[10]

See also

References

  1. ↑ CRC Handbook of Chemistry & Physics, 90th Ed.
  2. ↑ 2.0 2.1 Madder Root catalog entry at Natural Pigments website. Accessed on 2010-01-22.
  3. ↑ Chemical news and journal of industrial science, Volume 30, Page 207
  4. ↑ Wahl, Andre; Atack, F. W (1919) The Manufacture Of Organic Dyestuffs. G. Bell And Sons, Limited. Online version accessed on 2010-01-22.
  5. ↑ CRC Handbook of Chemistry & Physics, 90th Ed.
  6. ↑ Padma S. Vankar, Rakhi Shanker, Debajit Mahanta and S.C. Tiwari (2008), Ecofriendly sonicator dyeing of cotton with Rubia cordifolia Linn. using biomordant. Dyes and Pigments, Volume 76, Issue 1, Pages 207–212. doi:10.1016/j.dyepig.2006.08.023
  7. ↑ Irving Wetherbee Fay (1919) The chemistry of the coal-tar dyes. Van Nostrand Online version accessed on 2010-01-22.
  8. ↑ Hugh Alister McGuigan (1921), An introduction to chemical pharmacology; pharmacodynamics in relation to chemistry. P. Blakiston's son, Philadelphia. Online version at archive.org, accessed on 2010-01-30.
  9. ↑ Reddy, Arava Leela Mohana; Nagarajan, Subbiah; Chumyim, Porramate; Gowda, Sanketh R; Pradhan, Padmanava; Jadhav, Swapnil R; Dubey, Madan; John, George; Ajayan, Pulickel M; Ajayan, Pulickel M (2012). "Lithium storage mechanisms in purpurin based organic lithium ion battery electrodes". Nature. doi:10.1038/srep00960. Retrieved 12 December 2012. 
  10. ↑ Richard Chirgwin (12 December 2012). "Dying to make greener batteries". The Register. Retrieved 12 December 2012. 
This article is issued from Wikipedia. The text is available under the Creative Commons Attribution/Share Alike; additional terms may apply for the media files.