Prognostics

From Wikipedia, the free encyclopedia

Prognostics is an engineering discipline focused on predicting the time at which a system or a component will no longer perform its intended function.[1] This lack of performance is most often a failure beyond which the system can no longer be used to meet desired performance. The predicted time then becomes the Remaining Useful Life (RUL), which is an important concept in decision making for contingency mitigation. Prognostics predicts the future performance of a component by assessing the extent of deviation or degradation of a system from its expected normal operating conditions.[2] The science of prognostics is based on the analysis of failure modes, detection of early signs of wear and aging, and fault conditions. These signs are then correlated with a damage propagation model. Potential uses for prognostics is in condition-based maintenance. The discipline that links studies of failure mechanisms to system lifecycle management is often referred to as prognostics and health management (PHM), sometimes also system health management (SHM) or - in transportation applications - vehicle health management (VHM) or engine health management (EHM). Technical approaches to building models in prognostics can be categorized broadly into data-driven approaches, model-based approaches, and hybrid approaches.

Data-driven prognostics

Data-driven prognostics usually use pattern recognition and machine learning techniques to detect changes in system states.[3] The classical data-driven methods for nonlinear system prediction include the use of stochastic models such as the autoregressive (AR) model, the threshold AR model, the bilinear model, the projection pursuit, the multivariate adaptive regression splines, and the Volterra series expansion. Since the last decade, more interests in data-driven system state forecasting have been focused on the use of flexible models such as various types of neural networks (NNs) and neural fuzzy (NF) systems. Data-driven approaches are appropriate when the understanding of first principles of system operation is not comprehensive or when the system is sufficiently complex such that developing an accurate model is prohibitively expensive. Therefore, the principal advantages to data driven approaches is that they can often be deployed quicker and cheaper compared to other approaches, and that they can provide system-wide coverage (cf. physics-based models, which can be quite narrow in scope). The main disadvantage is that data driven approaches may have wider confidence intervals than other approaches and that they require a substantial amount of data for training. Data-driven approaches can be further subcategorized into fleet-based statistics and sensor-based conditioning. In addition, data-driven techniques also subsume cycle-counting techniques that may include domain knowledge.

The two basic data-driven strategies involve (1) modeling cumulative damage (or, equivalently, health) and then extrapolating out to a damage (or health) threshold, or (2) learning directly from data the remaining useful life.

As mentioned, a principal bottleneck is the difficulty in obtaining run-to-failure data, in particular for new systems, since running systems to failure can be a lengthy and rather costly process. When future usage is not the same as in the past (as with most non-stationary systems), collecting data that includes all possible future usages (both load and environmental conditions) becomes often nearly impossible. Even where data exist, the efficacy of data-driven approaches is not only dependent on the quantity but also on the quality of system operational data. These data sources may include temperature, pressure, oil debris, currents, voltages, power, vibration and acoustic signal, spectrometric data as well as calibration and calorimetric data. Features must be extracted from (more often than not) noisy, high-dimensional data.

Model-based prognostics

Model-based prognostics attempts to incorporate physical understanding (physical models) of the system into the estimation of remaining useful life (RUL). Modeling physics can be accomplished at different levels, for example, micro and macro levels. At the micro level (also called material level), physical models are embodied by series of dynamic equations that define relationships, at a given time or load cycle, between damage (or degradation) of a system/component and environmental and operational conditions under which the system/component are operated. The micro-level models are often referred as damage propagation model. For example, Yu and Harris’s fatigue life model for ball bearings, which relates the fatigue life of a bearing to the induced stress,[4] Paris and Erdogan's crack growth model,[5] and stochastic defect-propagation model[citation needed] are other examples of micro-level models. Since measurements of critical damage properties (such as stress or strain of a mechanical component) are rarely available, sensed system parameters have to be used to infer the stress/strain values. Micro-level models need to account in the uncertainty management the assumptions and simplifications, which may pose significant limitations of that approach.

Macro-level models are the mathematical model at system level, which defines the relationship among system input variables, system state variables, and system measures variables/outputs where the model is often a somewhat simplified representation of the system, for example a lumped parameter model. The trade-off is increased coverage with possibly reducing accuracy of a particular degradation mode. Where this trade-off is permissible, faster prototyping may be the result. However, where systems are complex (e.g., a gas turbine engine), even a macro-level model may be a rather time-consuming and labor intensive process. As a result, macro-level models may not be available in detail for all subsystems. The resulting simplifications need to be accounted for by the uncertainty management.

Hybrid approaches

Hybrid approaches attempt to leverage the strength from both data-driven approaches as well as model-based approaches. [6] [7] In reality, it is rare that the fielded approaches are completely either purely data-driven or purely model-based. More often than not, model-based approaches include some aspects of data-driven approaches and data-driven approaches glean available information from models. An example for the former would be where model parameters are tuned using field data. An example for the latter is when the set-point, bias, or normalization factor for a data-driven approach is given by models. Hybrid approaches can be categorized broadly into two categories, 1) Pre-estimate fusion and 2.) Post-estimate fusion.

Pre-estimate fusion of models and data

The motivation for pre-estimate aggregation may be that no ground truth data are available. This may occur in situations where diagnostics does a good job in detecting faults that are resolved (through maintenance) before system failure occurs. Therefore, there are hardly any run-to-failure data. However, there is incentive to know better when a system would fail to better leverage the remaining useful life while at the same time avoiding unscheduled maintenance (unscheduled maintenance is typically more costly than scheduled maintenance and results in system downtime). Garga et al. [REF] describe conceptually a pre-estimate aggregation hybrid approach where domain knowledge is used to change the structure of a neural network, thus resulting in a more parsimonius representation of the network. Another way to accomplish the pre-estimate aggregation is by a combined off-line process and on-line process: In the off-line mode, one can use a physics-based simulation model to understand the relationships of sensor response to fault state; In the on-line mode, one can use data to identify current damage state, then track the data to characterize damage propagation, and finally apply an individualized data-driven propagation model for remaining life prediction.

Post-estimate fusion of model-based approaches with data-driven approaches

Motivation for post-estimate fusion is often consideration of uncertainty management. That is, the post-estimate fusion helps to narrow the uncertainty intervals of data-driven or model-based approaches. At the same time, the accuracy improves. The underlying notion is that multiple information sources can help to improve performance of an estimator. This principle has been successfully applied within the context of classifier fusion where the output of multiple classifiers is used to arrive at a better result than any classifier alone. Within the context of prognostics, fusion can be accomplished by employing quality assessments that are assigned to the individual estimators based on a variety of inputs, for example heuristics, a priori known performance, prediction horizon, or robustness of the prediction.

Prognostic Performance Evaluation

Prognostic performance evaluation is of key importance for a successful PHM system deployment. The early lack of standardized methods for performance evaluation and benchmark data-sets resulted in reliance on conventional performance metrics borrowed from statistics. Those metrics were primarily accuracy and precision based where performance is evaluated against actual End of Life (EoL) typically known a priori in an offline setting. More recently, efforts towards maturing prognostics technology has put a significant focus on standardizing prognostic methods, including those of performance assessment. A key aspect, missing from the conventional metrics, is the capability to track performance with time. This is important because prognostics is a dynamic process where predictions get updated with an appropriate frequency as more observation data become available from an operational system. Similarly, the performance of prediction changes with time that must be tracked and quantified. Another aspect that makes this process different in a PHM context is the time value of a RUL prediction. As a system approaches failure, the time window to take a corrective action gets shorter and consequentially the accuracy of predictions becomes more critical for decision making. Finally, randomness and noise in the process, measurements, and prediction models are unavoidable and hence prognostics inevitably involves uncertainty in its estimates. A robust prognostics performance evaluation must incorporate the effects of this uncertainty.

Several prognostics performance metrics have evolved with consideration of these issues:

  • Prognostic Horizon (PH) quantifies how much in advance an algorithm can predict with a desired accuracy before a failure occurs. A longer PH is preferred as more time is then available for a corrective action.
  • α-λ accuracy further tightens the desired accuracy levels using a shrinking cone of desired accuracy as EoL approaches. In order to comply with desired α-λ specifications at all times an algorithm must improve with time to stay within the cone.
  • Relative Accuracy (RA) quantifies the accuracy relative to the actual time remaining before failure.
  • Convergence quantifies how fast the performance converges for an algorithm as EoL approaches.

A visual representation of these metrics can be used to depict prognostic performance over a long time horizon.

See also

Notes

  1. ↑ Vachtsevanos; Lewis, Roemer, Hess, and Wu (2006). Intelligent fault Diagnosis and Prognosis for Engineering Systems. Wiley. ISBN 0-471-72999-X. 
  2. ↑ Pecht, Michael G. (2008). Prognostics and Health Management of Electronics. Wiley. ISBN 978-0-470-27802-4. 
  3. ↑ Liu, Jie; Wang, Golnaraghi (2009). "A multi-step predictor with a variable input pattern for system state forecasting". Mechanical Systems and Signal Processing 23 (5): 1586–1599. doi:10.1016/j.ymssp.2008.09.006. 
  4. ↑ Yu, Wei Kufi; Harris (2001). "A new stress-based fatigue life model for ball bearings". Tribology Transactions 44 (1): 11–18. doi:10.1080/10402000108982420. 
  5. ↑ Paris, P.C.; F. Erdogan (1963). "A Critical Analysis of Crack Propagation Laws". ASME Journal of Basic Engineering 85: 528–534. 
  6. ↑ Pecht, Michael; Jaai (2010). "A prognostics and health management roadmap for information and electronics-rich systems". Microelectronics Reliability 50 (3): 317–323. 
  7. ↑ Liu, Jie; Wang, Ma, Yang, Yang (2012). "A data-model-fusion prognostic framework for dynamic system state forecasting". Engineering Applications of Artificial Intelligence 25 (4): 814–823. doi:10.1016/j.engappai.2012.02.015. 

Bibliography

Prognostics

  • Model-based Prognostics under Limited Sensing,M. Daigle, and K. Goebel, 2010 IEEE Aerospace Conference, March 2010.
  • Prognostics Methods for Battery Health Monitoring Using a Bayesian Framework, B. Saha, K. Goebel, S. Poll, and J. Christophersen, IEEE Transactions on Instrumentation and Measurement, vol.58, no.2, pp. 291–296, Feb. 2009.
  • Prognostics of Lithium-ion Batteries Based on Dempster-Shafer Theory and the Bayesian Monte Carlo Method, Wei He, Nicholas Williard, Michael Osterman, Michael Pecht, Journal of Power Sources, vol. 196, pp. 10314–10321, 2011.
  • Prognostics Enhanced Reconfigurable Control of Electro-Mechanical Actuators, D. Brown, G. Georgoulas, B. Bole, H. Pei, M. Orchard, L. Tang, B. Saha, A. Saxena, K. Goebel, and G. Vachtsevanos, IEEE Transactions on Control Systems Technology.
  • Distributed Prognostics Using Wireless Embedded Devices, S. Saha, B. Saha, and K. Goebel, International Conference on Prognostics and Health Management, Denver, CO, October 2008.
  • An Adaptive Recurrent Neural Network for Remaining Useful Life Prediction of Lithium-ion Batteries, J. Liu, A. Saxena, K. Goebel, B. Saha, and W. Wang, International Conference on Prognostics and Health Management, Portland, OR, October 2010.
  • Chen, Y. and Lee, J., "Data Quality for Manufacturing Prognostics using Spectral Analysis based Randomness Tests," In Press, Computers in Industry, http://dx.doi.org/10.1016/j.compind.2012.10.005
  • Siegel, D., Ly, C. and Lee, J., "Methodology and Framework for Predicting Helicopter Rolling Element Bearing Failure", IEEE Transactions on Reliability, Volume 61, Issue 4, pp. 846-857
  • Wang, S., Yu, J., Lapira, E. and Lee, J., "A Modified Support Vector Data Description based Novelty Detection Approach for Machinery Components", In Press, Applied Soft Computing
  • Siegel, D., Zhao, W., Lapira, E., AbuAli, M. and Lee, J., "A Comparative Study on Vibration – Based Condition Monitoring Algorithms for Wind Turbine Drive Trains", Wind Energy Journal (Special Issue), 2013, http://onlinelibrary.wiley.com/doi/10.1002/we.1585/full
  • Lapira, E., Brisset, D., Davari, H., Siegel, D. and Lee, J. "Wind turbine performance assessment using multi-regime modeling approach," the International Journal of Renewable Energy, vol. 45, pp. 86-95, 2011
  • Siegel, D., Al-Atat, H., Shauche, V., Liao, L., Snyder, J., Lee, J., "Novel method for Rolling Element Bearing Health Assessment – A Tachometer-less Synchronously Averaged Envelope Feature Extraction Technique," Mechanical Systems and Signal Processing, vol. 29, pp. 362-276, 2012
  • Yang, L. and Lee, J., "Bayesian Belief Network-based approach for diagnostics and prognostics of semiconductor manufacturing systems," Robotics and Computer-Integrated Manufacturing, 28 (1), pp. 66-74, 2012
  • Wu, F. and Lee, J., "Information Reconstruction Method for Improved Clustering and Diagnosis of Generic Gearbox Signals," International Journal of the PHM Society: Vol 2(1) 004, pages: 9, 2011
  • Lee, J. and AbuAli, M., "Innovative Product Advanced Service Systems (i-PASS): Methodology, tools and applications for dominant service design," International Journal of Advanced Manufacturing Technology, 52 (9-12), pp. 1161-1173, 2011
  • Lee, J., Ghaffari, M. and Elmellgy, S., "Self-maintenance and engineering immune systems: Towards smarter machines and manufacturing systems," Annual Reviews in Control 35 (1), pp. 111-122, 2011 ( Top 25 Hottest Article in 2011)
  • Siegel, D. and Lee, J., "An Auto-Associative Residual Processing and K-means Clustering Approach for Anemometer Health Assessment," International Journal of Prognostics and Health Management Society, Vol 2 (2) 014, pages: 12, 2011 ( online version)
  • Al-Atat, H., Siegel, D. and Lee, J., "A Systematic Methodology for Gearbox Health Assessment and Fault Classification," International Journal of Prognostics and Health Management Society, Vol 2 (1) 002, pages: 16, 2011 ( online version)
  • Wu, F., Wang, T., and Lee, J., "An online adaptive condition-based maintenance method for mechanical mystems," Mechanical Systems and Signal Processing, vol. 24, issue 8, pp. 2985-2995, 2010
  • Liao, L., and Lee, J., "Design of a reconfigurable prognostics platform for machine tools," Expert Systems with Applications, vol. 37, Issue 1, pp. 240-252, 2009
  • Liao, L., and Lee, J., "A novel method for machine performance degradation assessment based on fixed cycle features test," Journal of Sound and Vibration, Vol. 326, Issue 3-5, pp. 894-908, 2009
  • Lee, J., Chen, Y., Al-Atat, H., Abuali, M. and Lapira, E., "A systematic approach for predictive maintenance service design: methodology and applications." International Journal of Internet manufacturing and Services, Vol. 2, No. 1, pp. 76-94, 2009.
  • Lee, J., Liao, L., Lapira E., Ni, J., and Li, L., "Informatics platform for designing and deploying e-Manufacturing systems," Collaborative Design and Planning for Digital Manufacturing, Springer, London, 2009, pp. 1-35
  • Yan, J., Isobe N., and Lee, J., "Fuzzy Logic Combined Logistic Regression Methodology for Gas Turbine First Stage Nozzle Life,Prediction", Applied Mechanics and Materials , 10-12, pp. 583-587, 2008
  • Liao, L., Wang, H., and Lee, J., "Reconfigurable Watchdog Agent® for machine health prognostics", International Journal of COMADEM, vol. 11, Issue 3, pp. 2-15, 2008
  • Lee, J., Ni, J., Djurdjanovic, D., Qiu, H. and Liao, H., "Intelligent Prognostics Tools and E-Maintenance", Computers in Industry 57 pp. 476–489, 2006
  • Qiu, H., Lee, J. and Lin, J., "Wavelet Filter-based Weak Signature Detection Method and its Application on Roller Bearing Prognostics", Journal of Sound and Vibration, Volume 289(4-5), 7 , pp. 1066-1090, 2006
  • Yan, J. and Lee, J., "Machine Degradation Assessment and Root Cause Classification Using Logistic Regression Method," IEEE Mechatronics," ASME Journal of Manufacturing Science and Engineering, vol. 127, pp. 912-914, 2005.
  • Yan, J., Koc, M. and Lee., J., "A Prognostic Algorithm for Machine Performance Assessment and its Application," Production Planning & Control, Vol. 15, No. 8, pp. 796–801, 2004
  • Qu, L.S., Li, L. and Lee J., "Enhanced diagnostic certainty using information entropy theory," International Journal of Advanced Engineering Informatics, Vol. 17 (3-4), pp.141-150, July 2004.
  • Djurdjanovic, D., Lee, J. and Ni, J., "Watchdog Agent – An Infotronics Based Prognostics Approach for Product Performance Assessment and Prediction", International Journal of Advanced Engineering Informatics, Special Issue on Intelligent Maintenance Systems, Vol. 17, No.3-4, pp. 109-125, 2003.
  • Lee, J., "Smart Products and Service Systems for e-Business Transformation," Special Issues on "Managing Innovative Manufacturing," International Journal of Technology Management, pp. 45-52, Vol. 26, No. 1, 2003.
  • Lee, J., "e-Manufacturing Systems: fundamental and tools," Int. Journal of Robotics and Computer-integrated manufacturing, Vol 9. Issue 6, pp 501-507, Dec. 2003.
  • Koc, M., Ni, J., Lee, J., Bandyopadhyay, P., "Introduction to e-Manufacturing," International Journal of Agile Manufacturing, Special Issue on Distributed E-Manufacturing, Vol. 6, Dec. 2003
  • Qiu, H., Lee , J., Lin, J. and Yu, G., "Robust Performance Degradation Assessment Methods for Enhanced Rolling Element Bearings Prognostics," Journal of Advanced Engineering Informatics, vol. 17, Issue 3-4, pp. 127-140, 2003.

Electronics PHM

  • Modeling aging effects of IGBTs in power drives by ringing characterization, A. Ginart, M. J. Roemer, P. W. Kalgren, and K. Goebel, in International Conference on Prognostics and Health Management, 2008, pp. 1–7.
  • Prognostics of Interconnect Degradation using RF Impedance Monitoring and Sequential Probability Ratio Test, D. Kwon, M. H. Azarian, and M. Pecht,, International Journal of Performability Engineering, vol. 6, no. 4, pp. 351–360, 2010.
  • Latent Damage Assessment and Prognostication of Residual Life in Airborne Lead-Free Electronics Under Thermo-Mechanical Loads, P. Lall, C. Bhat, M. Hande, V. More, R. Vaidya, J. Suhling, R. Pandher, K. Goebel, in Proceedings of International Conference on Prognostics and Health Management, 2008.
  • Failure Precursors for Polymer Resettable Fuses, S. Cheng, K. Tom, and M. Pecht, IEEE Transactions on Devices and Materials Reliability, Vol.10, Issue.3, pp. 374–380, 2010.
  • Prognostic and Warning System for Power-Electronic Modules in Electric, Hybrid Electric, and Fuel-Cell Vehicles,Y. Xiong and X. Cheng, IEEE Transactions on Industrial Electronics, vol. 55, June 2008.
  • Sensor Systems for Prognostics and Health Management, Shunfeng Cheng, Michael H. Azarian and Michael G. Pecht, Sensors, Vol. 10, Issue 6, pp. 5774–5797,2010.
  • A Wireless Sensor System for Prognostics and Health Management, S. Cheng, K. Tom, L. Thomas and M. Pecht, IEEE Sensors Journal, Volume 10, Issue 4, pp. 856 – 862, 2010.
  • A prognostics and health management roadmap for information and electronics-rich systems, Rubyca Jaai and Michael Pecht, Microelectronics Reliability, Volume 50, Issue 3, March 2010, Pages 317-323, ISSN 0026-2714, doi:10.1016/j.microrel.2010.01.006
  • Physics-of-failure based Prognostics for Electronic Products, Michael Pecht and Jie Gu, Transactions of the Institute of Measurement and Control 31, 3/4 (2009), pp. 309–322.
  • Health Assessment of Electronic Products using Mahalanobis Distance and Projection Pursuit Analysis, Sachin Kumar, Vasilis Sotiris, and Michael Pecht, International Journal of Computer, Information, and Systems Science, and Engineering, vol.2 Issue.4, pp. 242–250, 2008.
  • Guest Editorial: Introduction to Special Section on Electronic Systems Prognostics and Health Management, P. Sandborn and M. Pecht, Microelectronics Reliability,, Vol. 47, No. 12, pp. 1847–1848, December 2007.
  • A Maintenance Planning and Business Case Development Model for the Application of Prognostics and Health Management (PHM) to Electronic Systems,P. A. Sandborn and C. Wilkinson, Microelectronics Reliability,, Vol. 47, No. 12, pp. 1889–1901, December 2007.
  • Prognostics Implementation of Electronics under Vibration Loading, J. Gu, D. Barker and M. Pecht, Microelectronics Reliability, Vol. 47, Issue 12, pp. 1849–1856, Dec. 2007.
  • Prognostic Assessment of Aluminum Support Structure on a Printed Circuit Board, S. Mathew, D. Das, M. Osterman, M. Pecht, and R. Ferebee ASME Journal of Electronic Packaging, Vol. 128, Issue 4, pp. 339–345, December 2006.
  • A Methodology for Assessing the Remaining Life of Electronic Products, S. Mathew, P. Rodgers, V. Eveloy, N. Vichare, and M. Pecht, International Journal of Performability Engineering, Vol. 2, No. 4, pp. 383–395, October, 2006.
  • Prognostics and Health Management of Electronics, N. Vichare and M. Pecht, IEEE Transactions on Components and Packaging Technologies, Vol. 29, No. 1, March 2006.

External links

This article is issued from Wikipedia. The text is available under the Creative Commons Attribution/Share Alike; additional terms may apply for the media files.