Prism

From Wikipedia, the free encyclopedia

This article is about a prism in optics. For a prism in geometry, see Prism (geometry). For other uses, see Prism (disambiguation).

"Prismatic" redirects here. For other uses, see Prismatic (disambiguation).

A plastic prism

In optics, a prism is a transparent optical element with flat, polished surfaces that refract light. At least two of the flat surfaces must have an angle between them. The exact angles between the surfaces depend on the application. The traditional geometrical shape is that of a triangular prism with a triangular base and rectangular sides, and in colloquial use "prism" usually refers to this type. Some types of optical prism are not in fact in the shape of geometric prisms. Prisms can be made from any material that is transparent to the wavelengths for which they are designed. Typical materials include glass, plastic and fluorite.

A dispersive prism can be used to break light up into its constituent spectral colors (the colors of the rainbow). Furthermore, prisms can be used to reflect light, or to split light into components with different polarizations.

How prisms work

A triangular prism, dispersing light; waves shown to illustrate the differing wavelengths of light. (Click to view animation)

Light changes speed as it moves from one medium to another (for example, from air into the glass of the prism). This speed change causes the light to be refracted and to enter the new medium at a different angle (Huygens principle). The degree of bending of the light's path depends on the angle that the incident beam of light makes with the surface, and on the ratio between the refractive indices of the two media (Snell's law). The refractive index of many materials (such as glass) varies with the wavelength or color of the light used, a phenomenon known as dispersion. This causes light of different colors to be refracted differently and to leave the prism at different angles, creating an effect similar to a rainbow. This can be used to separate a beam of white light into its constituent spectrum of colors. Prisms will generally disperse light over a much larger frequency bandwidth than diffraction gratings, making them useful for broad-spectrum spectroscopy. Furthermore, prisms do not suffer from complications arising from overlapping spectral orders, which all gratings have.

Prisms are sometimes used for the internal reflection at the surfaces rather than for dispersion. If light inside the prism hits one of the surfaces at a sufficiently steep angle, total internal reflection occurs and all of the light is reflected. This makes a prism a useful substitute for a mirror in some situations.

Deviation angle and dispersion

A ray trace through a prism with apex angle α. Regions 0, 1, and 2 have indices of refraction $n_{0}$ , $n_{1}$ , and $n_{2}$ , and primed angles $\theta '$ indicate the ray angles after refraction.

Ray angle deviation and dispersion through a prism can be determined by tracing a sample ray through the element and using Snell's law at each interface. For the prism shown at right, the indicated angles are given by

${\begin{aligned}\theta '_{0}&=\,{\text{arcsin}}{\Big (}{\frac {n_{0}}{n_{1}}}\,\sin \theta _{0}{\Big )}\\\theta _{1}&=\alpha -\theta '_{0}\\\theta '_{1}&=\,{\text{arcsin}}{\Big (}{\frac {n_{1}}{n_{2}}}\,\sin \theta _{1}{\Big )}\\\theta _{2}&=\theta '_{1}-\alpha \end{aligned}}$ .

For a prism in air $n_{0}=n_{2}\simeq 1$ . Defining $n=n_{1}$ , the deviation angle $\delta$ is given by

$\delta =\theta _{0}+\theta _{2}=\theta _{0}+{\text{arcsin}}{\Big (}n\,\sin {\Big [}\alpha -{\text{arcsin}}{\Big (}{\frac {1}{n}}\,\sin \theta _{0}{\Big )}{\Big ]}{\Big )}-\alpha$

If the angle of incidence $\theta _{0}$ and prism apex angle $\alpha$ are both small, $\sin \theta \approx \theta$ and ${\text{arcsin}}x\approx x$ if the angles are expressed in radians. This allows the nonlinear equation in the deviation angle $\delta$ to be approximated by

$\delta \approx \theta _{0}-\alpha +{\Big (}n\,{\Big [}{\Big (}\alpha -{\frac {1}{n}}\,\theta _{0}{\Big )}{\Big ]}{\Big )}=\theta _{0}-\alpha +n\alpha -\theta _{0}=(n-1)\alpha \ .$

The deviation angle depends on wavelength through n, so for a thin prism the deviation angle varies with wavelength according to

$\delta (\lambda )\approx [n(\lambda )-1]\alpha$ .

Prisms and the nature of light

A triangular prism, dispersing light

Before Isaac Newton, it was believed that white light was colorless, and that the prism itself produced the color. Newton's experiments demonstrated that all the colors already existed in the light in a heterogeneous fashion, and that "corpuscles" (particles) of light were fanned out because particles with different colors traveled with different speeds through the prism. It was only later that Young and Fresnel combined Newton's particle theory with Huygens' wave theory to show that color is the visible manifestation of light's wavelength.

Newton arrived at his conclusion by passing the red color from one prism through a second prism and found the color unchanged. From this, he concluded that the colors must already be present in the incoming light — thus, the prism did not create colors, but merely separated colors that are already there. He also used a lens and a second prism to recompose the spectrum back into white light. This experiment has become a classic example of the methodology introduced during the scientific revolution. The results of this experiment dramatically transformed the field of metaphysics, leading to John Locke's primary vs secondary quality distinction.

Newton discussed prism dispersion in great detail in his book Opticks.^[1] He also introduced the use of more than one prism to control dispersion.^[2] Newton's description of his experiments on prism dispersion was qualitative, and is quite readable. A quantitative description of multiple-prism dispersion was not needed until multiple prism laser beam expanders were introduced in the 1980s.^[3]

Types of prisms

Dispersive prisms

Comparison of the spectra obtained from a diffraction grating by diffraction (1), and a prism by refraction (2). Longer wavelengths (red) are diffracted more, but refracted less than shorter wavelengths (violet).

Main article: Dispersive prism

Dispersive prisms are used to break up light into its constituent spectral colors because the refractive index depends on frequency; the white light entering the prism is a mixture of different frequencies, each of which gets bent slightly differently. Blue light is slowed down more than red light and will therefore be bent more than red light.

Triangular prism
Abbe prism
Pellin–Broca prism
Amici prism
Compound prism
Grism, a dispersive prism with a diffraction grating on its surface

Reflective prisms

Reflective prisms are used to reflect light, in order to flip, invert, rotate, deviate or displace the light beam. They are typically used to erect the image in binoculars or single-lens reflex cameras – without the prisms the image would be upside down for the user. Many reflective prisms use total internal reflection to achieve high reflectivity.

The most common reflective prisms are:

Beam-splitting prisms

Some reflective prisms are used for splitting a beam into two or more beams:

Polarizing prisms

There are also polarizing prisms which can split a beam of light into components of varying polarization. These are typically made of a birefringent crystalline material.

Nicol prism
Wollaston prism
Nomarski prism – a variant of the Wollaston prism with advantages in microscopy
Rochon prism
Sénarmont prism
Glan–Foucault prism
Glan–Taylor prism
Glan–Thompson prism

Deflecting prisms

Wedge prisms are used to deflect a beam of light by a fixed angle. A pair of such prisms can be used for beam steering; by rotating the prisms the beam can be deflected into any desired angle within a conical "field of regard". The most commonly found implementation is a Risley prism pair.^[4] Two wedge prisms can also be used as an anamorphic pair to change the shape of a beam. This is used to make a round beam from the elliptical output of a laser diode.^[5]

Rhomboid prisms are used to laterally displace a beam of light without inverting the image.^[6]

Deck prisms were used on sailing ships to bring daylight below deck, since candles and kerosene lamps are a fire hazard on wooden ships.

In optometry

By shifting corrective lenses off axis, images seen through them can be displaced in the same way that a prism displaces images. Eye care professionals use prisms, as well as lenses off axis, to treat various orthoptics problems:

Diplopia
Positive and negative fusion problems
Positive relative accommodation and negative relative accommodation problems

References

↑ I. Newton (1704). Opticks. London: Royal Society. ISBN 0-486-60205-2.
↑ "The Discovery of the Spectrum of Light". Retrieved 19 December 2009.
↑ F. J. Duarte and J. A. Piper (1982). "Dispersion theory of multiple-prism beam expanders for pulsed dye lasers". Opt. Commun. 43: 303–307. Bibcode:1982OptCo..43..303D. doi:10.1016/0030-4018(82)90216-4.
↑ B.D. Duncan et al. (2003). "Wide-angle achromatic prism beam steering for infrared countermeasure applications". Opt. Eng. 42: 1038–1047. Bibcode:2003OptEn..42.1038D. doi:10.1117/1.1556393.
↑ http://www.edmundoptics.com/optics/prisms/specialty-prisms/wedge-prisms/2052
↑ http://www.edmundoptics.com/optics/prisms/specialty-prisms/rhomboid-prisms/2431

External links

Java applet of refraction through a prism
Grisms (Grating Prisms)
Fundamental Optics – CVI Melles Griot

This article is issued from Wikipedia. The text is available under the Creative Commons Attribution/Share Alike; additional terms may apply for the media files.