Potassium oxide

From Wikipedia, the free encyclopedia
Potassium oxide
Identifiers
CAS number 12136-45-7 YesY
ChemSpider 23354117 N
UNII 2033 N
MeSH Potassium+oxide
Jmol-3D images {{#if:O([K])[K]|Image 1
Properties
Molecular formula K2O
Molar mass 94.20 g/mol
Appearance pale yellow solid
Density 2.35 g/cm3
Melting point >350 °C decomp.
Solubility in water Reacts forming KOH
Structure
Crystal structure Antifluorite (cubic), cF12
Space group Fm3m, No. 225
Coordination
geometry
Tetrahedral (K+); cubic (O2–)
Thermochemistry
Std enthalpy of
formation ΔfHo298
−361 kJ·mol−1[1]
Standard molar
entropy
So298
98 J·mol−1·K−1[1]
Hazards
MSDS ICSC 0769
EU Index Not listed
Main hazards Corrosive, reacts violently with water
Flash point Non-flammable
Related compounds
Other anions Potassium sulfide
Other cations Lithium oxide
Sodium oxide
Rubidium oxide
Caesium oxide
Related potassium oxides Potassium peroxide
Potassium superoxide
Related compounds Potassium hydroxide
 N (verify) (what is: YesY/N?)
Except where noted otherwise, data are given for materials in their standard state (at 25 °C (77 °F), 100 kPa)
Infobox references

Potassium oxide (K2O) is an ionic compound of potassium and oxygen. This pale yellow solid, the simplest oxide of potassium, is a rarely encountered, highly reactive compound. Some materials of commerce, such as fertilizers and cements, are assayed assuming the percent composition that would be equivalent to K2O.

Production

Potassium oxide is produced from the reaction of oxygen and potassium; this reaction affords potassium peroxide, K2O2. Treatment of the peroxide with potassium produces the oxide:[2]

K2O2 + 2 K → 2 K2O

Alternatively and more conveniently, K2O is synthesized by heating potassium nitrate with metallic potassium:

2 KNO3 + 10 K → 6 K2O + N2

Potassium hydroxide cannot be further dehydrated to the oxide.

Properties and reactions

K2O crystallises in the antifluorite structure. In this motif the positions of the anions and cations are reversed relative to their positions in CaF2, with potassium ions coordinated to 4 oxide ions and oxide ions coordinated to 8 potassium.[3][4] K2O is a basic oxide and reacts with water violently to produce the caustic potassium hydroxide. It is deliquescent and will absorb water from the atmosphere, initiating this vigorous reaction.

Fertilizers

The chemical formula K2O is used in the N-P-K (nitrogen-phosphorus-potassium) numbers on the labels of fertilizers. Although K2O is the correct formula for potassium oxide, potassium oxide is not used as a fertilizer in these products. Normally, potassium chloride, potassium sulfate, or potassium carbonate is used as a fertilizer source for potassium. The percentage of K2O given on the label only represents the amount of potassium in the fertilizer if it was in the form of potassium oxide. Potassium oxide is about 83% potassium by weight, but potassium chloride, for instance, is only 60% potassium by weight. Potassium chloride provides less potassium than an equal amount of potassium oxide. Thus, if a fertilizer is 30% potassium chloride by weight, its standard potassium rating, based on potassium oxide, would be only 21.7%.

References

  1. 1.0 1.1 Zumdahl, Steven S. (2009). Chemical Principles 6th Ed. Houghton Mifflin Company. p. A22. ISBN 0-618-94690-X. 
  2. Holleman, A. F.; Wiberg, E. "Inorganic Chemistry" Academic Press: San Diego, 2001. ISBN 0-12-352651-5.
  3. Zintl, E.; Harder, A.; Dauth B. (1934), "Gitterstruktur der oxyde, sulfide, selenide und telluride des lithiums, natriums und kaliums", Zeitschrift für Elektrochemie und Angewandte Physikalische Chemie 40: 588–93 
  4. Wells, A.F. (1984) Structural Inorganic Chemistry, Oxford: Clarendon Press. ISBN 0-19-855370-6.
This article is issued from Wikipedia. The text is available under the Creative Commons Attribution/Share Alike; additional terms may apply for the media files.