Position (vector)

From Wikipedia, the free encyclopedia

In geometry, a position or position vector, also known as location vector or radius vector, is a Euclidean vector which represents the position of a point P in space in relation to an arbitrary reference origin O. Usually denoted x, r or s, it corresponds to the displacement from O to P:^[1]

${\mathbf {r}}=\overrightarrow {OP}.$

Frequently this is used in two-dimensional or three-dimensional space, but can be easily generalized to Euclidean spaces in any number of dimensions.^[2]

Definition

Three dimensions

A space curve in 3d. The position vector r is parametrized by a scalar t. At r = a the red line is the tangent to the curve, and the blue plane is normal to the curve.

In three dimensions, any set of three dimensional coordinates and their corresponding basis vectors can be used to define the location of a point in space—whichever is the simplest for the task at hand may be used.

Commonly, one uses the familiar Cartesian coordinate system, or sometimes spherical polar coordinates, or cylindrical coordinates;

${\begin{aligned}{\mathbf {r}}(t)&\equiv {\mathbf {r}}\left(x,y,z\right)\equiv x(t){\mathbf {{\hat {e}}}}_{x}+y(t){\mathbf {{\hat {e}}}}_{y}+z(t){\mathbf {{\hat {e}}}}_{z}\\&\equiv {\mathbf {r}}\left(r,\theta ,\phi \right)\equiv r(t){\mathbf {{\hat {e}}}}_{r}(\theta (t),\phi (t))\\&\equiv {\mathbf {r}}\left(r,\theta ,z\right)\equiv r(t){\mathbf {{\hat {e}}}}_{r}(\theta (t))+z(t){\mathbf {{\hat {e}}}}_{z}\\&\,\!\cdots \\\end{aligned}}$

where t is a parameter, owing to their rectangular or circular symmetry. These different coordinates and corresponding basis vectors represent the same position vector. More general curvilinear coordinates could be used instead, and are in contexts like continuum mechanics and general relativity (in the latter case one needs an additional time coordinate).

n dimensions

Linear algebra allows for the abstraction of an n-dimensional position vector. A position vector can be expressed as a linear combination of basis vectors:^[3]^[4]

${\mathbf {r}}=\sum _{{i=1}}^{n}x_{i}{\mathbf {e}}_{i}=x_{1}{\mathbf {e}}_{1}+x_{2}{\mathbf {e}}_{2}+\cdots x_{n}{\mathbf {e}}_{n}$

The set of all position vectors form position space (a vector space whose elements are the position vectors), since positions can be added (vector addition) and scaled in length (scalar multiplication) to obtain another position vector in the space. The notion of "space" is intuitive since each x_i (i = 1,2, ... n) can be any value, the collection of values defines a point in space.

The dimension of the position space is n (also denoted dim(R) = n). The coordinates of the vector r with respect to the basis vectors e_i are x_i. The vector of coordinates forms the coordinate vector or n-tuple (x₁, x₂, ... x_n).

Each coordinate x_i may be parameterized a number of parameters t. One parameter x_i(t) would describe a curved 1d path, two parameters x_i(t₁, t₂) describes a curved 2d surface, three x_i(t₁, t₂, t₃) describes a curved 3d volume of space, and so on.

The linear span of a basis set B = {e₁, e₂ ... e_n} equals the position space R, denoted span(B) = R.

Applications

Differential geometry

Main article: Differential geometry

Position vector fields are used to describe continuous and differentiable space curves, in which case the independent parameter needs not be time, but can be (e.g.) arc length of the curve.

Mechanics

Main articles: Newtonian mechanics, Analytical mechanics, and Equation of motion

In any equation of motion, the position vector r(t) is usually the most sought-after quantity because this function defines the motion of a particle (i.e. a point mass) - its location relative to a given coordinate system at some time t.

To define motion in terms of position, each coordinate may be parametrized by time; since each successive value of time corresponds to a sequence of successive spatial locations given by the coordinates, so the continuum limit of many successive locations is a path the particle traces.

In the case of one dimension, the position has only one component, so it effectively degenerates to a scalar coordinate. It could be, say, a vector in the x-direction, or the radial r-direction. Equivalent notations include:

${\mathbf {x}}\equiv x\equiv x(t),\quad r\equiv r(t),\quad s\equiv s(t)\cdots \,\!$

Derivatives of position

Kinematic quantities of a classical particle: mass m, position r, velocity v, acceleration a.

For a position vector r that is a function of time t, the time derivatives can be computed with respect to t. These derivatives have common utility in the study of kinematics, control theory, engineering and other sciences.

Velocity: ${\mathbf {v}}={\frac {{\mathrm {d}}{\mathbf {r}}}{{\mathrm {d}}t}}$

where dr is an infinitesimally small displacement (vector).

Acceleration: ${\mathbf {a}}={\frac {{\mathrm {d}}{\mathbf {v}}}{{\mathrm {d}}t}}={\frac {{\mathrm {d}}^{2}{\mathbf {r}}}{{\mathrm {d}}t^{2}}}$
Jerk: ${\mathbf {j}}={\frac {{\mathrm {d}}{\mathbf {a}}}{{\mathrm {d}}t}}={\frac {{\mathrm {d}}^{2}{\mathbf {v}}}{{\mathrm {d}}t^{2}}}={\frac {{\mathrm {d}}^{3}{\mathbf {r}}}{{\mathrm {d}}t^{3}}}$

These names for the first, second and third derivative of position are commonly used in basic kinematics.^[5] By extension, the higher order derivatives can be computed in a similar fashion. Study of these higher order derivatives can improve approximations of the original displacement function. Such higher-order terms are required in order to accurately represent the displacement function as a sum of an infinite series, enabling several analytical techniques in engineering and physics.

Relationship to displacement vectors

A displacement vector can be defined as the action of uniformly translating spatial points in a given direction over a given distance. Thus the addition of displacement vectors expresses the composition of these displacement actions and scalar multiplication as scaling of the distance. With this in mind we may then define a position vector of a point in space as the displacement vector mapping a given origin to that point. Note thus position vectors depend on a choice of origin for the space, as well as displacement vectors depend on the choice of an initial point.

Notes

↑ H.D. Young, R.A. Freedman (2008). University Physics (12th Edition ed.). Addison-Wesley (Pearson International). ISBN 0-321-50130-6.
↑ Keller, F. J, Gettys, W. E. et al. (1993), p 28–29
↑ Riley, K.F.; Hobson, M.P.; Bence, S.J. (2010). Mathematical methods for physics and engineering. Cambridge University Press. ISBN 978-0-521-86153-3.
↑ Lipschutz, S.; Lipson, M. (2009). Linear Algebra. McGraw Hill. ISBN 978-0-07-154352-1.
↑ Stewart, James (2001). "§2.8 - The Derivative As A Function". Calculus (2nd ed.). Brooks/Cole. ISBN 0-534-37718-1.

References

Keller, F. J, Gettys, W. E. et al. (1993). "Physics: Classical and modern" 2nd ed. McGraw Hill Publishing

This article is issued from Wikipedia. The text is available under the Creative Commons Attribution/Share Alike; additional terms may apply for the media files.