Porter-class destroyer

From Wikipedia, the free encyclopedia

USS Porter (DD-356)
Class overview
Name: Porter class destroyer
Builders: New York Shipbuilding
Bethlehem Shipbuilding Corporation (Fore River Shipyard)
Operators: United States
Preceded by: Farragut-class destroyer
Succeeded by: Mahan-class destroyer
Built: 1933 –1937
In commission: 1936 –1950
Completed: 8
Lost: 1
Retired: 7
General characteristics
Type: Destroyer
Displacement: 1,850 tons
Length: 381 ft (116 m)
Beam: 36 ft 2 in (11.02 m)
Draft: 10 ft 5 in (3.18 m)
Propulsion: 50,000 shp (37,285 kW);
geared steam turbines,
2 screws
Speed: 35 knots (65 km/h)
Range: 6,500 nmi. at 12 knots
(12,000 km at 22 km/h)
Complement: 194
Armament:

As Built:

c. 1942:

The Porter-class destroyers were a class of eight 1,850-ton destroyers in the United States Navy.

The first four ships were laid down in 1933 by New York Shipbuilding and the next four in 1934 at Bethlehem Steel Corporation in Quincy, Massachusetts. All were commissioned in 1936 except the Winslow, which was commissioned in 1937.

They were built in response to the large destroyers that the Japanese Navy was building at the time, and were initially leaders of destroyer flotillas. They were originally built with eight Mk 12 5 inch/38 caliber (127 mm) guns in four Mark 22 Single Purpose (surface action only) twin mounts.[1] Anti-aircraft protection was provided by two quadruple 1.1" (28 mm) mounts; in the 1930s this was considered sufficient. Both of these proved to be top-heavy, and aircraft were becoming a greater threat, so during the war, mounts 51 and 54 were replaced with Dual Purpose (surface action and air action) twin mounts,[1] and the original 1.1" guns were replaced with 40mm and 20mm weapons. In some ships, mount 52 was replaced by a quad 40 mm mount, and mount 53 became a single 5 in/38 (127/38 mm) Dual Purpose mount. Additional 40 mm guns were added amidships.

Design

The larger Destroyer Leader type had been under active consideration since 1921. Indeed the General Board recommended the construction of five of the type in that year. Naval historian Norman Friedman believed that the great number of Wickes-class destroyer and Clemson-class destroyer hindered the U.S.Congress from purchasing them. The General Board was very interested in equipping such a type with the new higher pressure and higher temperature steam propulsion equipment.[2] The London Naval Treaty and the large French destroyers seems to have become the tipping point with the 1930 recommendations beginning the cycle to actually build ships.[3] The Geneva proposals about destroyers also seems to have influence the design as the Destroyer Leader proposals limited themselves to 1850 tons per the proposals.[3] There were extensive discussions about the armament, the 5"/25 caliber AA gun being favored as being easy to work and train in a fast moving and lively type of ship. The other candidate was the 5"/51 caliber surface type, being very powerful but all but useless against aircraft. It was a discussion made more interesting as the 5"/38 caliber dual purpose gun was now becoming available and the Ordnance Department favored it rather strongly.[3]

Ships in class

See also

Media related to Porter class destroyers at Wikimedia Commons

Notes

  1. ↑ 1.0 1.1 "5"/38 (12.7 cm) Mark 12". Retrieved 2007-08-29. 
  2. ↑ Friedman, p.77
  3. ↑ 3.0 3.1 3.2 Friedman, p.79

External links

United States naval ship classes of World War II
Aircraft carriers
Light aircraft carriers
Escort carriers
Battleships
Battlecruisers
Heavy cruisers
Light cruisers
Destroyers
Destroyer escorts
Patrol frigates
Minesweepers
Submarines
S
Single ship of class
C
Completed after the war
X
Cancelled
This article is issued from Wikipedia. The text is available under the Creative Commons Attribution/Share Alike; additional terms may apply for the media files.