Polysulfide bromide battery

The Polysulfide Bromide battery (PSB), (sometimes Polysulphide Bromide)), is a type of regenerative fuel cell involving a reversible electrochemical reaction between two salt-solution electrolytes: sodium bromide and sodium polysulfide. It is an example and type of redox (reduction-oxidation) flow battery.

In 2002, a 12MWe prototype electrical storage facility was built at Little Barford Power Station in the United Kingdom, which uses polysulfide bromide flow batteries. Although the facility was completed, due to engineering issues in scaling up the technology, it was never fully commissioned.^[1] A similar demonstration plant located at the Tennessee Valley Authority (TVA) facility in Columbus, Mississippi, United States was never completed.

Chemistry

Two different salt solution electrolytes are contained in two separate tanks. When energy is required, a solution of Na₂S₂ (sodium sulphide) is pumped to the anode, and NaBr₃ (Sodium tribromide) is pumped to the cathode. The anode and cathode, and their corresponding salt solutions, are separated by an ion exchange membrane. At the negative electrode, the anodic reaction is shown as:

2Na₂S₂ → Na₂S₄ + 2Na⁺ + 2e^-

At the positive electrode, the cathodic reaction is shown as:

NaBr₃ + 2Na⁺ + 2e^-→ 3NaBr

As energy is drawn from the system, the sodium sulphide becomes sodium polysulphide, and the sodium tribromide becomes sodium bromide. This reaction can be reversed when a current is supplied to the electrodes, and the system chemical salts are recharged. The system is defined as a fuel cell because the electrodes are not consumed by the reaction, they act only as a surface for the reaction. However, nor is the liquid a fuel that is consumed. It is a salt solution electrolyte that is changed by the process.

See also

• Flow battery
• Battery (electricity)
• Lead–acid battery
• Electrochemical cell
• Fuel cell
• Energy storage

References

External links

• Electricity Storage Association section on PSBs (including diagram)

v t e Galvanic cells Types Voltaic pile Battery Flow battery Trough battery Concentration cell Fuel cell Primary cell (non-rechargable) Alkaline Aluminium–air Bunsen Chromic acid Clark Daniell Dry Edison-Lalande Grove Leclanché Lithium Mercury Nickel oxyhydroxide Silicon–air Silver oxide Weston Zamboni Zinc–air Zinc–carbon Secondary cell (rechargeable) Automotive Lead–acid gel / VRLA Lithium–air Lithium–ion Lithium polymer Lithium iron phosphate Lithium–sulfur Lithium titanate Nanowire Nickel–cadmium Nickel–hydrogen Nickel–iron Nickel–lithium Nickel–metal hydride Nickel–zinc Polysulfide bromide Potassium-ion Rechargeable alkaline Sodium-ion Sodium–sulfur Vanadium redox Zinc–bromine Zinc–cerium Cell parts Anode Binder Catalyst Cathode Electrolyte Half-cell Ions Salt bridge Semipermeable membrane