Polarized target

From Wikipedia, the free encyclopedia

The polarized targets are used as fixed targets in the scattering experiments. In the high energy physics they are used to study the nucleon spin structure of simple nucleons like protons, neutrons or deuterons. In deep inelastic scattering the hadron structure is probed with electrons, muons or neutrinos. Using a polarized high energy muon beam, for example, on a fixed target with polarized nucleons it is possible to probe the spin dependent part of the structure functions.[1][2]

In the simple parton model the nucleon consists of quarks and gluons and their interaction is governed by the quantum chromodynamics. An alternative method to the fixed targets is to use two colliding polarized beams. Several institutes and laboratories work in this field.[3][4][5][6][7]

An international workshop on the "Polarized Sources, Targets and Polarimetry" takes place every two years.[8][9][10][11]

The nuclear spins in the solid targets are polarized with dynamic nuclear polarization method typically in 2.5 or 5 T magnetic field.[12][13] The magnetic field can be generated with a superconducting magnet filled with liquid helium. The more traditional iron magnets are not preferred due to their large mass and limited geometrical acceptance for the produced particles. The target polarization during the experiment is determined with nuclear magnetic resonance method. The integrated enhanced NMR-signals are compared to the signals taken in superfluid helium-4 bath at well known calibration temperatures around 1 K, where the spin magnetization follows the Curie law and the nuclear polarization can be calculated from the temperature by using the Brillouin function. During the polarization build up a microwave generator is used to pump the paramagnetic centers in the target material close to the electron spin resonance frequency (about 70 GHz in 2.5 T field).

In the helium-3 gas targets[14][15][16] optical pumping is used to polarize the nucleons.

In the frozen spin targets low temperatures are needed to preserve the polarization for the long data taking periods (for the highest possible integrated luminosity) and to reach maximum nuclear polarization for the best figure of merit. Usually a dilution refrigerator with high cooling power is used to reach temperatures below 300 mK during the polarization build up and below 50 mK in frozen spin mode.[17][18][19] To preserve the paramagnetic centers in the target material it has to be kept all the time at cryogenic temperatures typically below 100 K. A horizontal dilution cryostat with the possibility to load directly the target material into the helium-3/4 mixing chamber from a liquid nitrogen bath is needed for this reason. While the beam should interact with the target material scattering from the target construction materials is not desired. This leads to an additional requirement of small material budget in terms of radiation length. Thin and low density construction materials are used for this reason in the region of the incoming beam and the scattering products.

The properties of a good polarized target material[4] are high number of polarizable nucleons compared to the total amount of nucleons, high polarization degree, short polarization build up time, slow polarization loss rate in frozen spin mode, good resistance against radiation damage and easy handling of the target material. For the dynamic nuclear polarization the material has to be doped with free radicals. Two different ways are usual: chemical doping by mixing with free radicals and creation of F-centers by irradiation in an intensive electron beam. Commonly used target materials are butanol, ammonia,[20][21][22] lithium hydrides[23] and their deuterated counterparts. A very interesting material is hydrogen deuteride, because it has the maximal content of polarizable nucleons.

References

  1. ↑ E. Leader (2001). "Spin in Particle Physics". Cambridge University Press. ISBN 0521352819.
  2. ↑ S. D. Bass (2008). "The Spin Structure of the Proton". World Scientific Publishing. ISBN 9812709479
  3. ↑ PSI
  4. ↑ 4.0 4.1 Ruhr-Universität Bochum Polarized Target Group
  5. ↑ Yamagata University, Research Group for Quark Nuclear Physics
  6. ↑ University of Virginia Spin Physics Group,University of Virginia Polarized Target Group
  7. ↑ Polarized Target Bonn
  8. ↑ XIth International Workshop on Polarized Sources and Targets, November 14-17, 2005, Tokyo, Japan
  9. ↑ XIIth International Workshop on Polarized Sources, Targets & Polarimetry, September 10-14, 2007, New York, USA
  10. ↑ XIIIthInternational Workshop on Polarized Sources, Targets & Polarimetry, September 7 - 11, 2009, Ferrara, Italy
  11. ↑ XIVth International Workshop on Polarized Sources, Targets & Polarimetry, September 12 - 18, 2011, St. Petersburg, Russia
  12. ↑ D. G. Crabb, W. Meyer (1997). "Solid Polarized Targets for Nuclear and Particle Physics Experiments". Annual Review of Nuclear and Particle Science 47: 67–109. Bibcode:1997ARNPS..47...67C. doi:10.1146/annurev.nucl.47.1.67. 
  13. ↑ A. Dael, D. Cacaut, H. Desportes, R. Duthil, B. Gallet, F. Kircher, C. Lesmond, Y. Pabot, J. Thinel (1992). "A superconducting 2.5 T high accuracy solenoid and a large 0.5 T dipole magnet for the SMC target". IEEE Transactions on Magnetics 28: 560–563. Bibcode:1992ITM....28..560D. doi:10.1109/20.119937. 
  14. ↑ Thomas Jefferson National Accelerator Facility, Hall A Helium-3 Target
  15. ↑ H. Middleton, G. D. Cates, T. E. Chupp, B. Driehuys, E. W. Hughes, J. R. Johnson, W. Meyer, N. R. Newbury, T. Smith, A. K. Thompson (1993). "The SLAC high‐density 3He target polarized by spin‐exchange optical plumbing". AIP Conference Proceedings 293: 244–252. doi:10.1063/1.45130. 
  16. ↑ St. Goertz, W. Meyer, G. Reicherz (2002). "Polarized H, D, and 3He Targets for Particle Physics Experiments". Progress in Particle and Nuclear Physics 49: 403–489. Bibcode:2002PrPNP..49..403G. doi:10.1016/S0146-6410(02)00159-X. 
  17. ↑ T. O. Niinikoski (1971). "A horizontal dilution refrigerator with very high cooling power". Nuclear Instruments and Methods 97: 95–101. Bibcode:1971NucIM..97...95N. doi:10.1016/0029-554X(71)90518-0. 
  18. ↑ S. Isagawa, S. Ishimoto, A. Masaike, K. Morimoto (1978). "A horizontal dilution refrigerator for polarized target". Nuclear Instruments and Methods 154: 213–218. Bibcode:1978NucIM.154..213I. doi:10.1016/0029-554X(78)90401-9. 
  19. ↑ T. O. Niinikoski (1982). "Dilution refrigerator for a two-litre polarized target". Nuclear Instruments and Methods in Physics Research 192: 151–156. Bibcode:1982NucIM.192..151N. doi:10.1016/0029-554X(82)90817-5. 
  20. ↑ T. O. Niinikoski, J.-M. Rieubland (1979). "Dynamic nuclear polarization in irradiated ammonia below 0.5 K". Physics Letters A 72: 141–144. Bibcode:1979PhLA...72..141N. doi:10.1016/0375-9601(79)90673-X. 
  21. ↑ D. G. Crabb, C. B. Higley, A. D. Krisch, R. S. Raymond, T. Roser, J. A. Stewart, G. R. Court (1990). "Observation of a 96% Proton Polarization in Irradiated Ammonia". Physical Review Letters 64: 2627–2629. Bibcode:1990PhRvL..64.2627C. doi:10.1103/PhysRevLett.64.2627. 
  22. ↑ W. Meyer (2004). "Ammonia as a polarized solid target material - a review". Nuclear Instruments and Methods in Physics Research A 526: 12–21. Bibcode:2004NIMPA.526...12M. doi:10.1016/j.nima.2004.03.145. 
  23. ↑ J. Ball (2004). "Thirty years of research with lithium compounds in Saclay". Nuclear Instruments and Methods in Physics Research A 526: 7–11. Bibcode:2004NIMPA.526....7B. doi:10.1016/j.nima.2004.03.144. 

External links

This article is issued from Wikipedia. The text is available under the Creative Commons Attribution/Share Alike; additional terms may apply for the media files.