Pointe shoe

A pointe shoe is a type of shoe worn by ballet dancers when performing pointe work. Pointe shoes developed from the desire for dancers to appear weightless and sylph-like and have evolved to enable dancers to dance en pointe (on the tips of their toes) for extended periods of time. They are normally worn by female dancers, though male dancers may wear them for unorthodox roles such as the ugly stepsisters in Cinderella, Bottom in A Midsummer Night's Dream, or men performing as women in dance companies such as Les Ballets Trockadero and Grandiva. They are manufactured in a variety of colors, most commonly in shades of light pink.

History of pointe shoes

Women began to dance ballet in 1681, twenty years after King Louis XIV of France ordered the founding of the Académie Royale de Danse. At that time, the standard women's ballet shoe had heels. Mid-18th century dancer Marie Camargo of the Paris Opéra Ballet was the first to wear a non-heeled shoe, enabling her to perform leaps that would have been difficult, if not impossible, in the more conventional shoes of the age. After the French Revolution, heels were completely eliminated from standard ballet shoes. These flat-bottomed predecessors of the modern pointe shoe were secured to the feet by ribbons and incorporated pleats under the toes to enable dancers to leap, execute turns, and fully extend their feet.

The first dancers to rise up on their toes did so with the help of an invention by Charles Didelot in 1795. His "flying machine" lifted dancers upward, allowing them to stand on their toes before leaving the ground. This lightness and ethereal quality was well received by audiences and, as a result, choreographers began to look for ways to incorporate more pointework into their pieces.

As dance progressed into the 19th century, the emphasis on technical skill increased, as did the desire to dance en pointe without the aid of wires. When Marie Taglioni first danced La Sylphide en pointe, her shoes were nothing more than modified satin slippers; the soles were made of leather and the sides and toes were darned to help the shoes hold their shapes. Because the shoes of this period offered no support, dancers would pad their toes for comfort and rely on the strength of their feet and ankles for support.

The next substantially different form of pointe shoe appeared in Italy in the late 19th century. Dancers like Pierina Legnani wore shoes with a sturdy, flat platform at the front end of the shoe, rather than the more sharply pointed toe of earlier models. These shoes also included a box—made of layers of fabric—for containing the toes, and a stiffer, stronger sole. They were constructed without nails and the soles were only stiffened at the toes, making them nearly silent.

The birth of the modern pointe shoe is often attributed to the early 20th-century Russian ballerina, Anna Pavlova, who was one of the most famous and influential dancers of her time. Pavlova had particularly high, arched insteps, which left her vulnerable to injury when dancing en pointe. She also had slender, tapered feet, which resulted in excessive pressure on her big toes. To compensate for this, she inserted toughened leather soles into her shoes for extra support and flattened and hardened the toe area to form a box.

Construction

Every dancer has unique feet, with variations that include toe length and shape, arch flexibility, and mechanical strength. Consequently, most pointe shoe manufacturers produce more than one model of shoe, with each model offering a different fit, as well as custom fitted shoes. Regardless of the manufacturer or model, however, all pointe shoes share two important structural features that enable dancers to dance on the tips of their toes:

• A box within the front end of the shoe that encases and supports the dancer's toes.
• A shank, which is a piece of rigid material that serves to stiffen the sole so as to provide support for the arch of the en pointe foot.

The exterior of a pointe shoe is covered with fabric, thus concealing the box and other internal structural elements and lending an aesthetically pleasing look to the shoe. Most pointe shoes are covered with satin, but some are available with canvas exteriors. Pointe shoes are most often available in light pink colors and less commonly in black and white. Pointe shoes can often be ordered in other custom colors.

The vamp refers to the shoe's upper, measured from the platform to the drawstring; normally, longer toes call for a longer vamp. The throat is the edge of the vamp above the arch of the foot; it is usually either v-shaped or round. The drawstring is located within the binding on the throat; this may be made from either elastic or lace.

Box

The box is a hard enclosure within the front end of the shoe that encases and supports the dancer's toes.^[1] The front end of the box is flattened so as to form a platform upon which the dancer can balance, and fabric covers the exterior of the box for æsthetics.

In conventional pointe shoes, the box is typically made from tightly packed layers of paper and fabric that have been glued together and then shaped into an enclosure.^[1] When the glue dries, it becomes hard and provides the required stiffness. In some newer pointe shoes, the box may be made from plastic and rubber, with rigidity provided by the plastic.^[1]

Sole

In most pointe shoes, the sole is constructed from a single piece of leather that is attached to the shoe with adhesive and reinforced by stitching along its edges.^[1] The sole overlaps and secures the unfinished edges of the shoe's exterior fabric. Pointe shoes may be manufactured with either scraped soles, which provide superior traction, or buffed soles, which have a smoother surface for reduced traction.

Aesthetic appearance is of paramount importance for modern pointe shoes. To achieve an elegant appearance, the shoe's more decorative outer fabric is prominently featured, covering the maximum possible area of the shoe's visible surfaces. To this end, the sole is made of thin material to give it a minimal profile, and a margin of satin is artfully pleated around it so that the sole covers only part of the bottom of the shoe.

Shank

Shanks are typically made from leather, plastic, cardstock, or layers of glue-hardened burlap. The flexibility of a shank is determined by its thickness and the type of material used. A shank's thickness may be consistent throughout or it may vary along its length to produce different strengths at select points. For example, slits may be cut across a shank at demi-pointe to enhance roll through. Also, a shank's thickness may transition at some point along its length in order to implement differing strengths above and below the transition. Standard pointe shoes typically have a full shank, in which the shank runs the full length of the sole, or fractional (e.g., half or three-quarter) length shanks. Many pointe shoe manufacturers offer a choice of shank materials, and some will build shoes with customized shanks of varying stiffness and length.

Dancers will sometimes wear different pointe shoe models for different performance pieces. In such cases, the choreography often dictates the type of shank required; a lyrical style may call for a softer shoe, while an aggressive style with many turns is more easily performed in a hard, stiff shoe.

Ribbons and elastic band

A pointe shoe employs two fabric ribbons and an elastic band to secure it to the foot. Most of the work of securing shoes to feet is done by the ribbons. The two ribbons wrap around the dancer's ankle in opposite directions, overlapping one another so as to form a cross at the front. The ends are then tied together in a knot, which is then tucked under the ribbon on the inside of the ankle to hide it from view. The elastic band—which traverses the front of the ankle below the ribbons—keeps the heel of the shoe in place against the foot when the dancer is en pointe.

The locations where the band and ribbons attach to a shoe is critical, as incorrect placement can result in a poorly fitting shoe.^[2] Optimal placement depends on the physical attributes of the foot to which it will be mated, and consequently the ribbons and elastic bands cannot be attached during the shoe manufacturing process. After acquiring a new pair of pointe shoes, a dancer must determine the appropriate attachment locations for the ribbons and elastic bands and then sew them, or arrange for them to be sewn, onto the shoes.

Demi-pointe shoe

A demi-pointe shoe, which is also variously called a break-down, pre-pointe, or a soft-block shoe, shares many characteristics with pointe shoes. For example, its outer appearance resembles that of a pointe shoe and it has a toe box, although the box is softer and the wings (sides of the toe box) are typically not as deep as those found on pointe shoes. Demi-pointe shoes are secured to the feet with ribbons and elastic band in identical fashion to pointe shoes. Unlike pointe shoes, however, demi-pointe shoes have no shank and, as a result, they do not provide the support necessary for proper pointe work.

Demi-pointe shoes are most often used to train dancers who are new to pointe technique. They serve to acclimate dancers to the feel of wearing pointe shoes and to strengthen the ankles and feet in preparation for dancing on pointe in pointe shoes. The toe box allows the dancer to experience the feel of a pointe shoe, while the insole and outsole work together to provide the resistance needed for developing foot and ankle strength.

Manufacturing process

Some parts of the pointe shoe manufacturing process are typically automated, though most of the shaping work^[clarify] is done by hand.

"Turnshoe" method

Traditional pointe shoes are usually manufactured using a method known as turnshoe, in which each shoe is initially assembled inside-out on a last and then turned right-side-out before finishing.^[3] When manufacturing standard pointe shoes, a standardized, common last is used for both left and right shoes, resulting in identical left and right shoes in a pair. Some ballerinas have custom-made lasts that replicate the shapes of their own feet; these may be supplied to a pointe shoe manufacturer for the purpose of manufacturing custom shoes.

Breaking in

Dancers break in, or soften, new pointe shoes in order to improve their fit and thus eliminate the discomfort caused by new shoes. Various methods are employed for breaking in new pointe shoes including deforming them against hard surfaces, striking them with blunt objects, wetting the toe boxes and then wearing them, and heating them to soften the glues, but these methods may shorten a pointe shoe's usable lifetime. Dancers will stretch their shoes with releves and eleves to conform the shoe to their foot.

Accessories

A dancer may experience discomfort while wearing a pointe shoe even after the shoe has been broken in. Several devices are commonly used to mitigate the discomfort:

• Toe pads are pouches that encapsulate and cushion the toes from the unyielding box and prevent friction that can cause blistering. These are typically made from thin, fabric-covered gel sheets.
• Gel toe spacers of various shapes and sizes are inserted between toes; these serve to adjust toe spacing and alignment so as to alleviate pain at the bunion joint between the big toe and first toe.
• Lambswool is stretched and wrapped around toes to reduce chafing and the likelihood of blisters. After several uses, the lambswool becomes densely packed and custom fitted to the dancer's foot.
• Tape is wrapped around toes to reduce chafing and blisters.

Lifetime

In the course of normal use, there are three predominant types of wear on a pointe shoe that will determine its useful lifetime. The most important of these is shank wear. As the body of the shoe is repetitively flexed, the shank gradually weakens and loses its ability to provide support. A pointe shoe is no longer serviceable when the shank breaks or becomes too soft to provide support. The second is the softening of the box and especially the platform on which the dancer balances.

The other primary type of wear involves the exterior fabric. In pointework, the front face and bottom edge of the toe box are subjected to friction against the performance surface. This friction will eventually wear through the shoe's outer fabric covering, thereby exposing the toe box and creating loose, frayed fabric edges. Unlike a weakened shank, damaged outer fabric does not affect the performance of a shoe. Due to its unprofessional appearance, however, damaged fabric may render the shoe unfit to wear in situations other than informal practice or rehearsal.

Under moderate usage, a pair of pointe shoes will typically last through ten to twenty hours of wear. For dance students, this often translates into weeks or months of serviceable use from a pair of pointe shoes. Professional dancers typically wear out pointe shoes much more quickly; a new pair may wear out in a single performance. As a result, most professional ballet companies provide shoe allowances for their dancers to defray the cost of frequent shoe replacement.

The lifetime of a pointe shoe depends on many factors, including:

• Usage. More aggressive dance styles and more frequent, longer durations of use will hasten wear.
• Dance technique. Improper technique subjects shoes to unusual stresses that may lead to premature failure.
• Fit. Well fitting pointe shoes encourage proper technique, which in turn leads to longer shoe life.
• Weight. Greater dancer weight exerts proportionally greater stresses to the shoes, leading to faster wear.
• Construction. Varying qualities and types of construction will yield different life expectancies.
• Shank material. The stiffness and integrity of various shank materials will degrade at varying rates.
• Breaking-in. The breaking-in process simulates accelerated wear, and thus may shorten the life of a shoe.
• Performance surface. Rough surfaces cause rapid wear of the exterior fabric, in contrast to smooth surfaces such as Marley floors, which minimize the rate of fabric wear.

See also

• Ballet shoe
• Dori shoes (heeled pointe shoes)
• Pointe shoe manufacturers
• Pointe technique

References

Wikimedia Commons has media related to Pointe shoes.

v t e Ballet terms Ballet d'action Barre Ballet blanc Comic ballet Contemporary ballet Ballets de cour Demi-soloist Divertissement Narrative ballet Neoclassical ballet Opéra-ballet Pas de deux Pas de quatre Pas de trois Pièce d'occasion Pointe shoes Romantic ballet Turnout Tutu Variation

v t e Ballet General information ballets companies glossary history music schools timeline Ballet terminology Ballet d'action Barre Ballet blanc Comic ballet Contemporary ballet Ballets de cour Demi-soloist Divertissement Narrative ballet Neoclassical ballet Opéra-ballet Pas de deux Pas de quatre Pas de trois Pièce d'occasion Pointe shoe Romantic ballet Turnout Tutu Variation Ballet by genre character classical contemporary neoclassical Ballet by region British French Italian Russian Dancers American British French Russian Technique Balanchine Bournonville Cecchetti Royal Academy Vaganova Ballet apparel dance belt leotard pointe shoes slippers tights tutu unitard Ballet portal Did you know? today's news today's article today's biography today's picture recent news

v t e Footwear Men's dress shoes Blucher Brogues Brothel creepers Derby Monks Oxfords Slip-ons (Loafers) Spectator shoes (Co-respondent shoes) Venetian-style shoes Winklepickers Women's dress shoes Ballet flats Court shoes High-heeled footwear Mary Janes Mojari Mule shoes Peep-toe shoes Saddle shoes Slingbacks Slip-ons (Loafers) Venetian style shoes Winklepickers Other shoes Driving moccasins Flip-flops Galoshes Platform shoes Sandals Slides Slippers Veldskoens Wooden footwear Bakya British clogs Cantabrian albarcas Getas Klompen Namaksin Padukas Pattens Sabot Military footwear Ammunition boots Bunny boots Combat boots Jackboots Jump boots Jungle boots Ranger boots Tanker boots Trench boots Sport-related footwear Athletic shoes Ballet shoes Boat shoes Climbing shoes Cross country running shoes Cycling shoes Football boots Hiking boots Ice skates Inline skates Jika-tabi Minimalist shoes Motorcycle boots Mountaineering boots Racing flats Riding boots Roller shoes Roller skates Skate shoes Ski boots Swimfins Water shoes Wrestling shoes Fashion boots Beatle boots Go-go boots Knee-high boots Over-the-knee boots Platform boots Thigh-high boots Ugg boots Work boots / shoes Australian work boots Chukka boots Cowboy boots Engineer boots Hip boots Rigger boots Steel-toe boots Waders Other boots Chelsea boots Wellington boots Traditional footwear Abacas Abarkas Avarcas Balghas Bast shoes Clogs Espadrilles Galesh Giveh Haferlschuh Hnyat-phanats Huarache (shoe) Hwas Jorabs Moccasins Mojaris Mukluks Opanaks Peshawari chappals Snowshoes Valenkis Warajis Historical footwear Areni-1 shoes Buskins Caligae Chopines Crakow (Poulaine) Hessians Pampooties Sabatons