Photochromic lens

From Wikipedia, the free encyclopedia

A photochromic eyeglass lens (polymer film), after exposure to sunlight with part of the lens covered by paper. Note the two levels of coloration around the dark-light interface, arising from the fact that the photochromic molecules are located in two thin films (on the front and back surfaces of the lens).

Photochromic lenses are lenses that darken on exposure to specific types of light, most commonly ultraviolet (UV) radiation. Once the light source is removed (for example by walking indoors), the lenses will gradually return to their clear state. Photochromic lenses may be made of glass, polycarbonate, or another plastic.

Invention

Photochromic lenses were developed by Roger Araujo at the Corning Glass Works Inc. in the 1960s, and the process was used in the first mass-produced variable tint lenses.

Technical details

The glass version of these lenses achieve their photochromic properties through the embedding of microcrystalline silver halides (usually silver chloride), or molecules in a glass substrate. Plastic photochromic lenses rely on organic photochromic molecules (for example oxazines and naphthopyrans) to achieve the reversible darkening effect. The reason these lenses darken in sunlight but not indoors under artificial light, is that room light does not contain the UV (short wavelength light) found in sunlight. Automobile windows also block UV so these lenses would darken less in a car. Lenses that darken in response to visible (rather than UV) light would avoid these issues, but they are not feasible for most applications. In order to respond to light, it is necessary to absorb it, thus the glass could not be made to be clear in its low-light state. This correctly implies photochromic lenses are not entirely transparent: they filter out UV light. This does not represent a problem, because the human eye does not see in the UV spectrum.

With the photochromic material dispersed in the glass substrate, the degree of darkening depends on the thickness of glass, which poses problems with variable-thickness lenses in prescription glasses. With plastic lenses, the material is typically embedded into the surface layer of the plastic in a uniform thickness of up to 150 µm.

Typically, photochromic lenses darken substantially in response to UV light in less than one minute, and then continue to darken very slightly over the next fifteen minutes.^[1] The lenses fade back to clear along a similar pattern. The lenses will begin to clear as soon as they are away from UV light, and will be noticeably lighter within two minutes and mostly clear within five minutes. However, it normally takes more than fifteen minutes for the lenses to completely fade to their non-exposed state. A study by the Institute of Ophthalmology at the University College London has suggested that even in dark conditions photochromic lenses can absorb up to 20% of ambient light.^{[citation needed]}

Because photochromic compounds fade back to their clear state by a thermal process, the higher the temperature, the less dark photochromic lenses will be. This thermal effect is called "temperature dependency" and prevents these devices from achieving true sunglass darkness in very hot weather. Conversely, photochromic lenses will get very dark in cold weather conditions, which makes them more suitable for snow skiers than beachgoers while outside. Once inside, away from the triggering UV light, the cold lenses take longer to regain their transparency than warm lenses.

A number of sunglass manufacturers/retailers (Intercast, Oakley, Serengeti Eyewear, Persol to name a few) offer products that use photochromism to make lenses that go from a dark to a darker state. Because these products are tinted in the bleached state, they are typically used only outdoors and are not considered general-purpose lenses.

References

↑ http://en-us.transitions.com/Why-Transitions/The-Technology/

External links

"Photochromic lenses", How stuff works .
"Optometry Glossary", Perfect glasses, USA .

v t e Glass science topics

Basics	Glass Glass transition Supercooling

Glass formulation	AgInSbTe Bioglass Borophosphosilicate glass Borosilicate glass Ceramic glaze Chalcogenide glass Cobalt glass Cranberry glass Crown glass Flint glass Fluorosilicate glass Fused quartz GeSbTe Gold ruby glass Lead glass Milk glass Phosphosilicate glass Photochromic lens glass Silicate glass Soda-lime glass Sodium hexametaphosphate Soluble glass Tellurite glass Ultra low expansion glass Uranium glass Vitreous enamel Wood's glass ZBLAN

Glass-ceramics	Bioactive glass CorningWare Glass-ceramic-to-metal seals Macor Zerodur

Glass preparation	Annealing Chemical vapor deposition Glass batch calculation Glass forming Glass melting Glass modeling Ion implantation Liquidus temperature Sol-gel technique Viscosity Vitrification

Optics	Achromat Dispersion Gradient-index optics Hydrogen darkening Optical amplifier Optical fiber Optical lens design Photochromic lens Photosensitive glass Refraction Transparent materials

Surface modification	Anti-reflective coating Chemically strengthened glass Corrosion Dealkalization DNA microarray Hydrogen darkening Insulated glazing Porous glass Self-cleaning glass Sol-gel technique Toughened glass

Diverse topics	Glass-coated wire Glass databases Glass electrode Glass fiber reinforced concrete Glass ionomer cement Glass microspheres Glass-reinforced plastic Glass science institutes Glass-to-metal seal Porous glass Prince Rupert's Drops Radioactive waste vitrification Windshield

This article is issued from Wikipedia. The text is available under the Creative Commons Attribution/Share Alike; additional terms may apply for the media files.