Overburden pressure

Overburden pressure, also called lithostatic pressure, confining pressure or vertical stress, is the pressure or stress imposed on a layer of soil or rock by the weight of overlying material.

The overburden pressure at a depth z is given by

where ρ(z) is the density of the overlying rock at depth z and g is the acceleration due to gravity. p₀ is the datum pressure, like the pressure at the surface.

It may be noted that the above equation implies that gravitational acceleration is a constant over z since it is placed outside of the integral. Strictly speaking, for almost all boundary conditions, g should appear inside the integrand since g is a function of the distance from mass. However, since g varies little over depths which are a very small fraction of the Earth's radius, it is placed outside of the integral in practice for most near-surface applications which require an assessment of lithostatic pressure. In deep-earth geophysics/geodynamics, gravitational acceleration varies significantly over depth, demanding that g be taken, at least, as a function of depth.

See also

• Sedimentary rock
• Effective stress
• Pore water pressure

v t e Topics in geotechnical engineering Soils Clay Silt Sand Gravel Peat Loam Loess Soil properties Hydraulic conductivity Water content Void ratio Bulk density Thixotropy Reynolds' dilatancy Angle of repose Cohesion Porosity Permeability Specific storage Soil mechanics Effective stress Pore water pressure Shear strength Overburden pressure Consolidation Soil compaction Soil classification Shear wave Lateral earth pressure Geotechnical investigation Cone penetration test Standard penetration test Exploration geophysics Monitoring well Borehole Laboratory tests Atterberg limits California bearing ratio Direct shear test Hydrometer Proctor compaction test R-value Sieve analysis Triaxial shear test Hydraulic conductivity tests Water content tests Field tests Crosshole sonic logging Nuclear densometer test Foundations Bearing capacity Shallow foundation Deep foundation Dynamic load testing Pile integrity test Wave equation analysis Statnamic load test Retaining walls Mechanically stabilized earth Soil nailing Tieback Gabion Slurry wall Slope stability Mass wasting Landslide Slope stability analysis Earthquakes Soil liquefaction Response spectrum Seismic hazard Ground-structure interaction Geosynthetics Geotextile Geomembranes Geosynthetic clay liner Cellular confinement Instrumentation for Stability Monitoring Deformation monitoring Automated Deformation Monitoring