Omaha Zoo Railroad
| Omaha Zoo Railroad | |
|---|---|
| Reporting mark | OZRR |
| Locale | Henry Doorly Zoo in Omaha, Nebraska |
| Dates of operation | 1968–present |
| Track gauge | 2 ft 6 in (762 mm) |
| Length | 1.8 miles |
| Headquarters | Omaha, Nebraska |
The Omaha Zoo Railroad, or the OZRR, is the name of a heritage railroad at the Henry Doorly Zoo in Omaha, Nebraska. The railroad offers a narrow gauge excursion train for zoo visitors hauled by a steam locomotive. The train loads passengers at two stations within the zoo. Annual ridership of the Omaha Zoo Railroad is over 200,000 people.
History
The Omaha Zoo Railroad was one of the first major attractions added after the zoo's 1963 re-incorporation as the Henry Doorly Zoo. As part of its centennial celebration, the Omaha-based Union Pacific Railroad decided to sponsor the construction of a train ride at the zoo. The zoo's railroad initially had just over two miles (3.2 km) of 2 ft 6 in (762 mm) gauge track (roughly half the width of standard mainline railroad tracks) in the form of a twisted oval with a connecting track through the middle. Two wyes (Y-shaped track arrangements enabling the train to reverse direction) were constructed at the intersections of the connecting track and the main oval. The track was laid using rail from the Union Pacific's Encampment branch in Wyoming. Due to the hilly terrain of the zoo's riverside location, grades of up to 6% (for most railroads 2% is considered steep) were required and some of the curves were well under 150 feet (46 m) in radius. Track crews from the Union Pacific were brought in to lay the track, and operation commenced on July 22, 1968 under the supervision of UP Roadmaster Robert Kovar.
Fittingly for a train ride sponsored by the Union Pacific, the Omaha Zoo Railroad was initially themed after the UP's First Transcontinental Railroad route, for which Omaha was the eastern terminus. Passengers boarded at the "Omaha train depot" located in the Aksarben Nature Kingdom (today known as Red Barn Park) and rode to "Promontory Junction" at the south end of the zoo's lagoon, where they had the option of disembarking at the small depot and catching a later train back to Omaha. The ride also featured a climb up the 6% grade of "Sherman Hill", named for the Union Pacific's own grade over the continental divide in Wyoming. The steam locomotive was painted and decorated to resemble Union Pacific's No. 119, the famous locomotive used in the laying of the real "Golden spike" marking the transcontinental line's completion, and the four coaches were given names significant to the UP's history. The UP influence was perhaps most evident in the Omaha Zoo Railroad's logo: a Union Pacific shield with a smiling tiger superimposed over it. Though the direct references to Union Pacific place names have faded over the years, UP's support of the zoo railroad has remained strong. For years the train equipment was trucked to the Union Pacific's Omaha shops for winter maintenance, and when the shops closed much of the machinery was donated to build a new shop on site at the zoo. The Union Pacific Engine House, as this building is called, was dedicated in July 1994. Union Pacific crews continue to maintain the crossing signals along the zoo railroad's route.
During the 1970s the Omaha Zoo Railroad and the zoo as a whole saw large increases in attendance. Especially on the weekends, it became evident that the original four car train could not provide the needed capacity, and a search was begun for a second train. By chance, a small tank locomotive of Austrian Heritage named "Riva" was found in Romania and its owner, the Plasser and Theurer Company, was willing to donate it to the zoo. The locomotive was restored in the UP's shops and entered service at the zoo in 1976, together with two extra cars that were purchased to augment the original four. Kenefick Station was added in 1981 allowing guests to board the train closer to the zoo's main entrance. In the early years the train commonly ran figure eights through the zoo using the connecting track and often reversed direction on the wyes. This practice ended in the early 1970s due to the need for faster turnarounds and the new locomotive's inability to negotiate a tight curve on the north (Bailey) wye. The connecting track lay idle for two decades before finally being removed in the mid-1990s. Today the trains circle the park in a clockwise direction, covering roughly 1.8 miles (2.9 km) and taking 20–25 minutes on each circuit.
The Promontory Junction Station was abandoned in the early 1990s. Today, guests can begin their ride at the Omaha Depot or Kenefick Station. Beginning in 2010, both trains have operated simultaneously on busy weekends allowing more frequent departures from the two stations.
Omaha Zoo Railroad trains
Visitors to the Henry Doorly Zoo ride behind one of three locomotives for the 1.8-mile (2.9 km) trip around the park. Two of the engines are steam locomotives, and though they are similar in the basic principle of their operation, the two locomotives are otherwise quite different and guests can easily distinguish between them. The third engine is a diesel, which operates very differently from the steam locomotives. New coaches have been added and replacing the old coaches.
"Riva" began its long career in 1890 when its was turned out by the Krauss Works of Linz, Austria as serial number 2360. Its first owner was the M.A.R. (Mori–Arco–Riva del Garda) Railway in northern Italian region of Trentino-South Tyrol, where it served as number 2 alongside two identical sister engines, "Arco" and "Lago di Garda". The railway sustained heavy damage during World War I, and in 1915 "Riva" was sent to the kuk Heeresfeldbahn in Austria-Hungary for use on military trains. From 1918 to 1941 it served an industrial railway in Stryj, Poland. The Second World War brought another stint in military duty before the engine finally ended up on the State Railways of Romania (CFR) as number 395–104. "Riva" operated on the CFR's Alba Julia–Zlatna line until 1968, when it was finally retired and sold to Plasser and Theurer, an Austria-based builder of track maintenance machinery. Fortunately for the little engine, an American representative of Plasser and Theurer became aware of the Omaha Zoo's search for a second locomotive, and in 1974 arrangements were made for "Riva" to be donated to the zoo. Restoration took place in the Union Pacific's Omaha shops. The overhaul consisted of major running gear work, the installation of American air brake equipment, and conversion from coal to oil firing. The locomotive was then painted, and missing parts such as the headlights and bell were replaced. The reborn "Riva" entered service at the zoo in 1976 during the annual Family Night/Members' Day event, and has operated almost every year since. A major multi-year overhaul took place in the early 1990s and another in 2000–2002. During the winter and spring of 2005, the water tanks were replaced and the air tanks (added in 1976) were moved to a concealed location, returning the engine to a more historically correct appearance. The engine lost its light green and black paint sceme and was repainted all dark green. The engine was given a new bell in 2013.
See Also
- Union Pacific No. 119, the basis for the zoo's original engine.
- Transportation in Omaha
- Disneyland Railroad
- Walt Disney World Railroad
Sources
- Terry, Jeff. "Trains at the Zoo - Part One", Railfan and Railroad Magazine, February 2006 issue, Carstens Publications, Newton, NJ, 2006.
External links
- Omaha's Henry Doorly Zoo official website.
Coordinates: 41°13′44″N 95°55′39″W / 41.22889°N 95.92750°W
| ||||||||||||||||||||||||||