Nyagak Power Station

From Wikipedia, the free encyclopedia
Nyagak Power Station
Map of Uganda showing the location of Nyagak Power Station
Country Uganda
Location Paidha
Coordinates 02°25′52″N 30°58′28″E / 2.43111°N 30.97444°E / 2.43111; 30.97444Coordinates: 02°25′52″N 30°58′28″E / 2.43111°N 30.97444°E / 2.43111; 30.97444
Status Operational
Commission date September 2012[1]
Power station
Primary fuel Hydropower
Generation units 2
Power generation
Maximum capacity 3.5 MW

Nyagak Power Station is a 3.5 MW mini hydroelectric power plant in Uganda.

Location

The power station is located across the Nyagak River, in Nyapea Sub-county, Okoro County, Zombo District, in West Nile, Northern Uganda. This location lies in the town of Paidha, close to the border with the Democratic Republic of the Congo. The coordinates of the power station are: 02 25 52N, 30 58 28E (Latitude:2.4310; Longitude:30.9745).[2]

Overview

The site and the development concept for the project have been extensively studied, including:

  • An EIA study by Gissat Technical Consultants Limited in 1997
  • A detailed feasibility and EIA studies by Harza Engineering 1998
  • An EIA study by NORPLAN in 2001
  • An Environmental Impact Statement by Environmental Management Associates and ECON Center for Economic Analysis in 2005.[3]

The Nyagak Hydropower project, in its first phase, is expected to generate 3.5 MW, using a run-of-river scheme. A diversion weir, 14 metres (46 ft) high, will be constructed about 600 metres (2,000 ft) downstream from the Paidha-Nyapea Road Bridge. A power intake will be located at the left abutment of the weir. The water conveyance works comprise a 1 kilometre (0.62 mi) long pipeline, a surge shaft, and a 400 metres (1,300 ft) long surface penstock. The powerhouse will be configured to accommodate two 1.65 MW generating units along with the associated electro-mechanical equipment. West Nile is not connected to the Uganda National Electric Grid and is not expected to be connected to the national network until the planned 600 MW Karuma Power Station comes online in 2017.

It is anticipated that power produced from Nyagak will serve a population in excess of one million people in Arua District, Nebbi District and Zombo District. A 33kV powerline connecting the two towns of Arua and Nebbi is being developed. A 33kV powerline already exists between the towns of Nebbi and Paidha, and is just a short distance away from the proposed powerhouse. The structural design allows for future expansion of the generation capacity to 7 MW of power.

All the studies carried out prior to construction of the powerhouse, indicated that there are potentially low environmental and social impacts that would result from the implementation of the Nyagak Hydropower Project. The main reasons for this is that the hydro scheme is small and its impacts are limited. The area is sparsely populated with low aquatic and terrestrial ecological characteristics.

The Nyagak Hydropower project is in line with the Ugandan government’s plans for the decentralization and privatization of hydropower systems. The Government of Uganda, through support from the World Bank, is in the process of implementing the Energy for Rural Transformation (ERT) through the African Rural Renewable Energy Initiative (AFRREI).[4] West Nile Rural Electrification Company (WENRECO), a subsidiary of Industrial Promotion Services, was selected to develop the power plant.[5] Construction began in December 2006.

Construction delays

The project has delayed for nearly two decades due to financial and procurement hurdles at government level. President Yoweri Museveni broke ground in February 2006. In December 2006, the Czech construction firm Skodaexport Company Limited', started construction. Since 2006, about ten deadlines have been issued for the completion of the dam.[6]

After multiple delays and interruptions, the construction of the power station resumed in August 2010. Spencon Services of India, is the new contractor on the project. Under revised terms of the construction contract, the Government of Uganda will take a 10% shareholding in the power station.[7] In November 2011, Ugandan media reports indicated that the power station will now come on-line in late March 2012.[8] As of July 2012, the construction of the power station is complete. Technical commissioning is scheduled for 8 August 2012, and political commissioning is expected later in 2012.[9] On 14 September 2012, President Yoweri Museveni commissioned the power plant.

Construction costs

The estimated costs for the dam and power plant is approximately US$15 million. This does not include the construction of additional 33kV transmission power lines under the planned West Nile Grid Extension and Rehabilitation Project, linking the towns of Paidha, Nebbi, Bondo, Okollo and Arua, estimated at about US$16 million.[10] German Investment Corporation (DEG), a subsidiary of the German Development Bank (KfW), is providing US$ 11 million to the construction of Nyagak Power Station, as well as US$ 13 million to the West Nile Grid Extension and Rehabilitation Project.[11]

External links

Photos and diagrams

See also

External links

References

This article is issued from Wikipedia. The text is available under the Creative Commons Attribution/Share Alike; additional terms may apply for the media files.