Mzingwane River

From Wikipedia, the free encyclopedia
Coordinates: 22°11′13″S 29°55′32″E / 22.18694°S 29.92556°E / -22.18694; 29.92556
Mzingwane River
River
Mzingwane River above Fulton's Drift (causeway), near Beitbridge, Zimbabwe
Country Zimbabwe
Source
 - location South of Bulawayo, Zimbabwe
Mouth
 - location Limpopo River, South Africa/Zimbabwe border
 - elevation 452 m (1,483 ft)
 - coordinates 22°11′13″S 29°55′32″E / 22.18694°S 29.92556°E / -22.18694; 29.92556
Basin 15,695 km2 (6,060 sq mi)
Discharge
 - average 22.30 m3/s (788 cu ft/s)
[1]
Mzingwane
Location of the Mzingwane River's mouth

The Mzingwane River, formerly known Umzingwane River as or Umzingwani River is a major left-bank tributary of the Limpopo River in Zimbabwe. It rises near Fort Usher, Matobo District, south of Bulawayo and flows into the Limpopo River near Beitbridge, downstream of the mouth of the Shashe River and upstream of the mouth of the Bubye River.

Hydrology

The Mzingwane River is an ephemeral river with flow generally restricted to the months when rain takes place (November to March), with most flow recorded between December and February, except where it has been modified by dam operations.[2] The river contributes 9.3% of the mean annual runoff of the Limpopo Basin, making it the third largest tributary to the Limpopo basin.[1]

Major tributaries of the Mzingwane River include the Insiza, Inyankuni, Ncema, Umchabezi (not to be confused with Mtshabezi) and Mtetengwe Rivers.

The lower Mzingwane River is a sand filled channel, with extensive alluvial aquifers in the river channel and below the alluvial plains. Estimated water resources potential of these aquifers ranges between 175,000 m3 and 5.43 Mm3 in the channels and between 80,000 m3 and 6.92 Mm3 in the plains. Currently, some of these aquifers are being used to provide water for domestic use, livestock watering and dip tanks, commercial irrigation and market gardening.[3]

Settlements along the River

The settlements below are ordered from the beginning of the river to its end:

Bridges and Crossings

Bertie Knott Bridge on the Mzingwane River near Beitbridge.

There are four main bridges over the Mzingwane River:

There are also a number of fords, including:

Development

Spillway of Zhovhe Dam, near Beitbridge.

In addition to a number of small weirs, there are two major dams on the Mzingwane River:

  • Mzingwane Dam, built in 1962, with a full supply capacity of 42 Mm3. It is located near the source of the river and supplies water to the City of Bulawayo.
  • Zhovhe Dam, built in 1995, with a full supply capacity of 136 Mm3.It is located near the confluence with the Limpopo River and supplies water for irrigation and to Beitbridge

Additional dam sites have been identified at Glassblock and Oakley Block, but development is not currently scheduled.[5]

Currently, a project is underway to construct a pipeline from the upper Mtshabezi River (not to be confused with Umchabezi River) to Mzingwane Dam.

References

  1. 1.0 1.1 Görgens, A.H.M.; Boroto, R.A. (1997). "Limpopo River: flow balance anomalies, surprises and implications for integrated water resources management". Proceedings of the 8th South African National Hydrology Symposium. Pretoria. 
  2. Love, D., Uhlenbrook, S., Nyabeze, W., Owen, R.J.S., Twomlow, S., Savenije, H. , Woltering, L. and van der Zaag, P. 2005. Modelling of hydrological change for IWRM planning: case study of the Mzingwane River, Limpopo Basin, Zimbabwe. In: Abstract Volume, 6th WaterNet/WARFSA/GWP-SA Symposium, Ezulwini, Swaziland, November 2005, p31.
  3. Moyce, W., Mangeya, P., Owen, R. and Love, D. 2006. Alluvial aquifers in the Mzingwane Catchment: their distribution, properties, current usage and potential expansion. Physics and Chemistry of the Earth, 31, 988-994.
  4. Beitbridge
  5. Chibi, T., Kandori, C. and Makone, B.F. (2005). Mzingwane Catchment Outline Plan. Bulawayo: Zimbabwe National Water Authority. 
This article is issued from Wikipedia. The text is available under the Creative Commons Attribution/Share Alike; additional terms may apply for the media files.