Microburin

A microburin is a characteristic waste product from manufacture of lithic tools, sometimes confused with an authentic burin, which is characteristic of the Mesolithic, but which has been recorded from the end of the Upper Paleolithic until the Calcolithic.^[1] This type of lithic artifact was first named by Henri Breuil who defined it as «a type of angular, smooth, with a terminal retouch in the form of a small notch».^[2] Breuil initially thought that the microburins had a functional use as a type of microlithic burin. However, he later came to realize that the manufacturing technique was different from that of the burin and that they could be waste products from the manufacture of microliths,^[3] but the may have occasionally been reused for a useful purpose.

A microburin is a fragment of a lithic flake, or more precisely, of a lithic blade, that shows on its upper face the beginnings of a notch terminating in an oblique flection (whose surface can only be seen from the lower side) that ends in a very acute trihedral apex. As stated earlier, it was thought that microburins were functional microliths, but carving experiments, along with the reassembly of pieces with perfectly aligned edges have demonstrated that they were a characteristic waste of a technique called microburin technique, or more correctly microburin blow technique. Following a study of thousands of microburins originating from a variety of saharan sites Jacques Tixier noted that none of the pieces showed traces of intentional use, this finding confirms the finding of the analysis of European pieces.^[4] Examples found in Europe can be seen on this page : http://www.archeobase.be/page_microburins_meso.html. They are related with Mesolithic hunters of the Walloon region of Belgium ap. 9,000 years ago.

There is also a particular type of microburin named after Krukowski^[5] that is from a carving accident and not a waste byproduct.

See also

• Microlith
• Microburin technique

Notes