Meet-in-the-middle attack

The Meet-in-the-Middle attack is a generic space–time tradeoff cryptographic attack.

Description

MITM is a generic attack, applicable on several cryptographic systems. The internal structure of a specific system is therefore negligible to this attack. It is possible though to combine it with other kinds of attack as has been done.

Naturally it requires the ability to encrypt and decrypt, and the possession of pairs of plaintexts and corresponding ciphertexts.

When trying to improve the security of a block cipher, a tempting idea is to simply use several independent keys to encrypt the data several times using a sequence of functions (encryptions). Then one might think that this doubles or even n-tuples the security of the multiple-encryption scheme, depending on the number of encryptions the data must go through.

The Meet-in-the-Middle attack attempts to find a value using both of the range (ciphertext) and domain (plaintext) of the composition of several functions (or block ciphers) such that the forward mapping through the first functions is the same as the backward mapping (inverse image) through the last functions, quite literally meeting in the middle of the composed function.

The Multidimensional MITM (MD-MITM) uses a combination of several simultaneous MITM-attacks like described above, where the meeting happens in multiple positions in the composed function.

Certainly, an exhaustive search on all possible combination of keys (simple bruteforce) would take 2^k·j attempts if j encryptions has been used with different keys in each encryption, where each key is k bits long. Using MITM or MD-MITM, this can be done better.

History

It was first developed as an attack on an attempted expansion of a block cipher by Diffie and Hellman in 1977.^[1]

Diffie and Hellman, however, devised a space-time tradeoff that could break the scheme in only double the time to break the single-encryption scheme.

In 2011, Bo Zhu and Guang Gong investigate the Multidimensional Meet-in-the-Middle attack and present new attacks on the block ciphers GOST (block cipher), KTANTAN and Hummingbird-2.^[2]

MITM (1D-MITM)

Assume the attacker knows a set of plaintext P and ciphertext C that satisfies the following:

where ENC is the encryption function, DEC the decryption function defined as ENC^-1 (inverse mapping) and k₁ and k₂ are two keys.

The attacker can then compute ENC_k1(P) for all possible keys k₁ and then decrypt the ciphertext by computing DEC_k2(C) for each k₂. Any matches between these two resulting sets are likely to reveal the correct keys. (To speed up the comparison, the ENC_k1(P) set can be stored in an in-memory lookup table, then each DEC_k2(C) can be matched against the values in the lookup table to find the candidate keys)

This attack is one of the reasons why DES was replaced by Triple DES — "Double DES" does not provide much additional security against exhaustive key search for an attacker with 2⁵⁶ space.^[3] However, Triple DES with a "triple length" (168-bit) key is vulnerable to a meet-in-the-middle attack in 2⁵⁶ space and 2¹¹² operations.^[4]

Once the matches are discovered, they can be verified with a second test-set of plaintext and ciphertext.

MITM algorithm

Compute the following:

• ∀ ∈ :

and save each together with corresponding in a set A

• ∀ ∈ :

and compare each new with the set A

When a match is found, keep k_f1,k_b1 as candidate key-pair in a table T. Test pairs in T on a new pair of (P,C) to confirm validity. If the key-pair does not work on this new pair, do MITM again on a new pair of (P,C).

MITM complexity

If the keysize is k, this attack uses only 2^k+1encryptions(and decryptions) (and O(2^k) memory in case a look-up table have been built for the set of forward computations) in contrast to the naive attack, which needs 2^2·k encryptions but O(1) space.

Multidimensional-MITM

While 1D-MITM can be efficient, a more sophisticated attack has been developed: Multi Dimensional-Meet In The Middle attack, also abbreviated MD-MITM. This is more preferred when the data has been encrypted using more than 2 encryptions with different keys. Instead of meeting in the middle (one place in the sequence), the MD-MITM attack attempts to reach several specific intermediate states using the forward and backward computations at several positions in the cipher.^[2]

Assume that the attack has to be mounted on a block cipher, where the encryption and decryption is defined as before:

that is a plaintext P is encrypted multiple times using a repetition of the same block cipher

An illustration of MD-MITM attack

The MD-MITM has been used for cryptanalysis of among many, the GOST block cipher, where it has been shown that a 3D-MITM has significantly reduced the time complexity for an attack on it.^[2]

MD-MITM algorithm

Compute the following:

• ∀ ∈ :

and save each together with corresponding in a set .

• ∀ ∈ :

and save each together with corresponding in a set .

For each possible guess on the intermediate state compute the following:

• ∀ ∈ :

and for each match between this and the set , save and in a new set .

• ∀ ∈ :

and save each together with corresponding in a set .

For each possible guess on an intermediate state compute the following:

1 ∀ ∈

and for each match between this and the set , check also whether

it matches with and then save the combination of sub-keys together in a new set .

2 ...

For each possible guess on an intermediate state compute the following:

a) ∀ ∈

and for each match between this and the set , check also whether

it matches with , save and in a new set

.

b) ∀ ∈

and for each match between this and the set , check also

whether it matches with . If this is the case then:"

Use the found combination of sub-keys on another pair of plaintext/ciphertext to verify the correctness of the key.

Note the nested element in the algorithm. The guess on every possible value on s_j is done for each guess on the previous s_j-1. This make up an element of exponential complexity to overall time complexity of this MD-MITM attack.

MD-MITM complexity

Time complexity of this attack without brute force, is ⋅⋅

Regarding the memory complexity, it is easy to see that are much smaller than the first built table of candidate values: as i increases, the candidate values contained in must satisfy more conditions thereby fewer candidates will pass on to the end destination .

An upper bound of the memory complexity of MD-MITM is then

where denotes the length of the whole key (combined).

The data complexity depends on the probability that a wrong key may pass (obtain a false positive), which is , where is the intermediate state in the first MITM phase. The size of the intermediate state and the block size is often the same! Considering also how many keys that are left for testing after the first MITM-phase, it is .

Therefore after the first MITM phase, there are ⋅ ,where $|b|$ is the block size.

For each time the final candidate value of the keys are tested on a new plaintext/ciphertext-pair, the amount of keys that will pass will be multiplied by the probability that a key may pass which is .

The part of brute force testing (testing the candidate key on new (P,C)-pairs, have time complexity ...

,clearly for increasing multiples of b in the exponent, number tends to zero.

The conclusion on data complexity is by similar reasoning restricted by that around ⌈⌉ (P,C)-pairs.

Below is a specific example of how a 2D-MITM is mounted:

A general example of 2D-MITM

This is a general description of how 2D-MITM is mounted on a block cipher encryption.

In Two-dimensional MITM (2D-MITM) the method is to reach 2 intermediate states inside the multiple encryption of the plaintext. See below figure:

2D-MITM algorithm

Compute the following:

• ∀ ∈

and save each together with corresponding in a set A

• ∀ ∈

and save each together with corresponding in a set B.

For each possible guess on an intermediate state s between and compute the following:

1 ∀ ∈

and for each match between this and the set A, save and in a new set T.

2 ∀ ∈

and for each match between this and the set B, check also whether it matches with T for

if this is the case then:

Use the found combination of sub-keys on another pair of plaintext/ciphertext to verify the correctness of the key.

2D-MITM complexity

Time complexity of this attack without brute force, is ⋅ where |⋅| denotes the length.

Main memory consumption is restricted by the construction of the sets A and B where T is much smaller than the others.

For data complexity see subsection on complexity for MD-MITM.

See also

• Space–time tradeoff
• Birthday attack
• Triple DES
• Data Encryption Standard
• GOST (block cipher)
• Brute-force attack

References

v t e   Block ciphers (security summary) Common algorithms AES Blowfish DES Triple DES Serpent Twofish Less common algorithms Camellia CAST-128 IDEA RC2 RC5 SEED Skipjack TEA XTEA Other algorithms 3-Way Akelarre Anubis ARIA BaseKing BassOmatic BATON BEAR and LION CAST-256 Chiasmus CIKS-1 CIPHERUNICORN-A CIPHERUNICORN-E CLEFIA CMEA Cobra COCONUT98 Crab Cryptomeria/C2 CRYPTON CS-Cipher DEAL DES-X DFC E2 FEAL FEA-M FROG G-DES GOST Grand Cru Hasty Pudding cipher Hierocrypt ICE IDEA NXT Intel Cascade Cipher Iraqi KASUMI KeeLoq KHAZAD Khufu and Khafre KN-Cipher Ladder-DES Libelle LOKI97 LOKI89/91 Lucifer M6 M8 MacGuffin Madryga MAGENTA MARS Mercy MESH MISTY1 MMB MULTI2 MultiSwap New Data Seal NewDES Nimbus NOEKEON NUSH PRESENT Q RC6 REDOC Red Pike S-1 SAFER SAVILLE SC2000 SHACAL SHARK Simon SMS4 Speck Spectr-H64 Square SXAL/MBAL Threefish Treyfer UES Xenon xmx XXTEA Zodiac Design Feistel network Key schedule Lai-Massey scheme Product cipher S-box P-box SPN Avalanche effect Block size Key size Key whitening No weak keys Attack (cryptanalysis) Brute-force (EFF DES cracker) MITM Linear (Piling-up lemma) Differential (Impossible Truncated Higher-order) Differential-linear Integral (aka Square) Boomerang Mod n Related-key Slide Rotational Timing XSL Interpolation Partitioning Davies' Rebound Standardization AES process CRYPTREC NESSIE Utilization Initialization vector Mode of operation Padding v t e   Cryptography History of cryptography Cryptanalysis Cryptography portal Outline of cryptography Symmetric-key algorithm Block cipher Stream cipher Public-key cryptography Cryptographic hash function Message authentication code Random numbers Steganography