Maicoletta

Maicoletta

Manufacturer	Maico
Production	1954-1966
Assembly	Pfaffingen, Germany
Class	scooter
Engine	Fan-cooled two-stroke single-cylinder engine, 174 cc (10.6 cu in), 247 cc (15.1 cu in), or 277 cc (16.9 cu in)
Bore / stroke	61 mm x 59.5 mm (174 cc)[1] 67 mm x 70 mm (247 cc)[2][3] 71 mm x 70 mm (277 cc)[4]
Top speed	68 mph (109 km/h) (247cc)[3]
Power	14.0 bhp (10.4 kW) at 5100 rpm (247 cc)[3] 16.2 bhp (12.1 kW) (247 cc)
Transmission	4 speed manual with heel-and-toe shifter pedal, enclosed chain drive
Frame type	tubular steel frame with pressed steel body panels
Suspension	Front: telescopic forks Rear: Swingarm with coil springs and dampers
Brakes	Front: 6.5 inch drum Rear: drum
Tires	14 inch front and rear
Dimensions	L 81 in (2,100 mm)[3] W 25 in (640 mm)[3] H 38 in (970 mm)[3]
Seat height	29 in (740 mm)[3]
Weight	322 lb (146 kg)[3] (wet)
Fuel capacity	2.625 imp gal (11.93 L)[2][3]
Oil capacity	24:1 petrol/oil mixture
Fuel consumption	71 mpg-imp (4.0 L/100 km) (with 247 cc engine)[3]
Related	Maico Mobil

The Maicoletta was a motor scooter built by Maico from 1955 to 1966.^[5] It was noted by motorcycle journalists in the United States and the United Kingdom for being powerful, responsive, and comfortable.^[2][3][4] It was one of the heaviest and most expensive motor scooters of its time and predates the touring scooters popularized by the Honda CN250.

The Maicoletta was highly regarded in the United Kingdom. When Maico stopped making the Maicoletta, the U.K. importer built more of them from its spare parts inventory.

The two-stroke engine of the Maicoletta used an unusual starter that rocked the crankshaft back and forth before firing instead of rotating it.

History

The Maicoletta was introduced in 1955.^[5][6] It used components based on those used in Maico's conventional motorcycles, including the engine, transmission, and front forks.^[4] It was built to compete in the German scooter market of the 1950s.^[7] Maico had earlier introduced an enclosed motorcycle with superior weather protection for the rider, the Maico Mobil, that was marketed as a "two-wheeled car" with interchangeable wheels and a spare wheel mounted into the barrel shaped bodywork behind the number plate and rear lamp.^[7][8] The Maicoletta used the fourteen-inch wheels, gear ratio indicator, and headlights from the Mobil. ^[5]

When the Maicoletta was first exported to the United Kingdom, it was one of the heaviest and most expensive scooters sold there.^[2] It gained a reputation in the U.K. as a high-quality, heavy, powerful, scooter capable of being ridden in comfort over long distances.^[3] The brakes were noted at the time by Motor Cycling and Scooter Weekly for being powerful and progressive in that the braking force increased with increased effort against the braking controls.^[2][3] The optional 277 cc engine was considered particularly useful with a sidecar combination,^[5] as was the steering damper.^[3]

Maico stopped offering the 174 cc and 277 cc engine options in 1962 and ended production of the Maicoletta in 1966. Demand for Maicolettas in the U.K. was such that the importer used its inventory of spare parts to build new Maicolettas to special order until late 1967.^[5]

Specifications

Frame and suspension

The Maicoletta had a tubular steel frame with pressed steel body panels.^[2][3] Front suspension was with a telescopic fork with coil springs, hydraulic damping, and a steering damper.^[3] Rear suspension was with a swingarm with dual coil springs and twin hydraulic dampers.^[2][3][4] The wheels were 14 inches in diameter^[2][3][4] and had a width between 3.25 inches^[3] and 3.5 inches.^[2] Drum brakes were used front and rear. The front drums were 6.5 inches in diameter,^[2][3][4] while the rear brake was either 6 inches^[2] or 5 inches^[3] in diameter.

Drivetrain

The Maicoletta had a fan-cooled single-cylinder piston port two-stroke engine,^[2][3][4] originally of either 174 cc or 247 cc. A 277 cc engine became available in 1957.^[5] The transmission had four ratios and was controlled by a heel-and-toe pedal.^[3] The engine and transmission were mounted on the frame^[3] and drove the rear wheel through an enclosed drive chain.^[2][3]

Pendulum starter

The Maicoletta used a Bosch 6 volt 'pendulum' electric starter system. When activated, instead of rotating the crankshaft, the starter used the generator coils on the shaft to rock it back and forth under the control of cams on the crankshaft. These cams closed contacts in the starter to trigger a reversing switch in the control box that changed the crankshaft direction at the end of each swing. This gives the impression of the crankshaft continually bouncing back and forwards against compression, when operated.^[3] A separate set of ignition points fired the spark plug in the forward direction only, and when this fires the mixture in the cylinder the engine starts to rotate normally, the starter is released and the normal ignition system takes over. This system was possible due to the piston port induction system of the two-stroke engine.^{[citation needed]}

The advantage of this system is that the starter does not have to force the crankshaft to turn over against compression, so less power is required from the 6 volt system. Its disadvantage is the unusually large number of contacts, which can be difficult to adjust. The reversing switch contacts tend to wear out with extended use and can be very difficult to service or to have serviced, hence the scooter's reputation for requiring roll starts later in life.^{[citation needed]} The Maicoletta did not have a kick starter.^[4]

Ergonomics

The Maicoletta was noted for being large and comfortable,^[2][3][4] with an exceptionally large and commodious dual seat^[3] and room for the rider and passenger to move around and avoid fatigue.^[3][4]

Maicoletta Dash

The Maicoletta had a dashboard with a speedometer and an eight-day clock.^[2][3][4] A gear ratio indicator was incorporated in the speedometer.^[3][4]

The drivetrain was covered by the rear bodywork, which could be removed as a unit by loosening one bolt and unplugging the lead to the taillight.^[2] Access to the fuel cap and the spark plug was also available by unlocking and lifting the hinged seat,^[2][3] and an access panel on the left side allowed access to the carburettor.^[3]

One ergonomic concern was the considerable effort required to mount the Maicoletta on its centre stand. This made it difficult for small riders or riders of slight build to park the scooter.^[2][3] Another concern was the cold-start lever, which was positioned below the glove box and was not readily visible.^[2]

Maicoletta
Maicoletta, front left view  Maicoletta, rear left view  Maicoletta, rear right view

References

Citations

Sources

Further reading

• Michael, Dan (2007). The A-Z of Popular Scooters & Microcars: Cruising in Style!. Veloce Publishing. ISBN 1-84584-088-7 

External links

Wikimedia Commons has media related to Maico scooters.

• Video of the Maicoletta's pendulum starter in action on YouTube
• Video of the switching of the control box used to operate the starter on YouTube