Magnetic deviation

From Wikipedia, the free encyclopedia
Slots for small magnets in a binnacle. The magnets are positioned to reduce the effect of the ship's permanent magnetization on the compass.

Magnetic deviation is the error induced in a compass by local magnetic fields, which must be allowed for, along with magnetic declination, if accurate bearings are to be calculated.

Compass readings

Compasses are used to determine the direction of true North. However, the compass reading must be corrected for two effects. The first is magnetic declination, the angular difference between magnetic North (the local direction of the Earth's magnetic field) and true North. The second is magnetic deviation, the angular difference between magnetic North and the compass needle due to nearby sources of iron.

Magnetic anomalies

The Earth's magnetic field is modified by local magnetic anomalies. These include variations of the magnetization in the Earth's crust caused by geomagnetic reversals as well as nearby mountains and iron ore deposits. Generally, these are indicated on maps as part of the declination. Because the Earth's field changes over time, the maps must be kept up to date for accurate navigation. Short term errors in compass readings are also caused by fields generated in the Earth's magnetosphere, particularly during geomagnetic storms.

Internal sources

In navigation manuals, magnetic deviation often refers specifically to compass error caused by magnetized iron within a ship or aircraft. This iron has a mixture of permanent magnetization and an induced (temporary) magnetization that is induced by the Earth's magnetic field. Because the latter depends on the orientation of the craft relative to the Earth's field, it can be difficult to analyze and correct for it.

The deviation errors caused by magnetism in the ship's structure are minimised by precisely positioning small magnets and iron compensators close to the compass. To compensate for the induced magnetization, two magnetically soft iron spheres are placed on side arms. However, because the magnetic "signature" of every ship changes slowly with location, and with time, it is necessary to adjust the compensating magnets, periodically, to keep the deviation errors to a practical minimum.[1] Magnetic compass adjustment and correction is one of the subjects in the examination curriculum for a shipmaster's certificate of competency.

The sources of magnetic deviation vary from compass to compass or vehicle to vehicle. However, they are independent of location, and thus the compass can be calibrated to accommodate them.

Non-magnetic methods of taking bearings, such as with gyrocompass, astronomical observations, satellites (as GPS) or radio navigation, are not subject to magnetic deviation. Thus, a comparison of bearings taken with such methods with the bearing given by a compass can be used to compute local magnetic deviation.

History

Diagram of a 19th-century binnacle housing a compass. It has two soft iron spheres (Q) to correct for induced magnetization.

Sailing ships generally had two kinds of compasses: steering compasses, two of which would be mounted in a binnacle in front of the helm for use in maintaining a course; and a bearing compass that was used for taking the bearings of celestial objects, landmarks and the ship's wake. The latter could be moved around the ship, and it was soon observed that the bearing could vary from one part of the ship to another. The explorer Joao de Castro was the first to report such an inconsistency, in 1538, and attributed it to the ship's gun. Many other objects were found to be sources of deviation in ships, including iron particles in brass compass bowls; iron nails in a wooden compass box or binnacle; and metal parts of clothing. The two steering compasses themselves could interfere with each other if they were set too close together.[2]

The source of deviation could not always be identified. To reduce this source of error, which was due to induced magnetization in the ship, the surveyor John Churchman proposed a solution known as swinging the ship in 1794. This involved measuring the magnetic deviation as the ship was oriented in several compass directions. These measurements could then be used to correct compass readings. This procedure became standard practice in the 19th century as iron became an increasing component of ships.[2]

Notes

  1. NGIA
  2. 2.0 2.1 Jonkers 2003, pp. 168169

References

External links

This article is issued from Wikipedia. The text is available under the Creative Commons Attribution/Share Alike; additional terms may apply for the media files.