Magnesium perchlorate
Magnesium perchlorate | |
---|---|
Identifiers | |
CAS number | 10034-81-8 |
PubChem | 24840 |
ChemSpider | 23223 |
RTECS number | SC8925000 |
Jmol-3D images | {{#if:[Mg+2].O=Cl(=O)(=O)[O-].[O-]Cl(=O)(=O)=O|Image 1 |
| |
| |
Properties | |
Molecular formula | Mg(ClO4)2 |
Molar mass | 223.206 g/mol |
Appearance | white powder, deliquescent |
Odor | odorless |
Density | 2.21 g/cm3 (anhydrous) 1.98 g/cm3 (hexahydrate) |
Melting point | 251 °C (anhydrous) 95-100 °C (hexahydrate) |
Boiling point | decomposition |
Solubility in water | 99.3 g/100 mL |
Solubility in ethanol | 23.96 g/100 mL |
Hazards | |
MSDS | External MSDS |
EU Index | Not listed |
R-phrases | R8, R36, R37, R38 |
S-phrases | S17, S26, S27, S36, S37, S39 |
NFPA 704 |
0
1
0
OX
|
Related compounds | |
Other cations | Calcium perchlorate Barium perchlorate |
(verify) (what is: / ?) Except where noted otherwise, data are given for materials in their standard state (at 25 °C (77 °F), 100 kPa) | |
Infobox references | |
Magnesium perchlorate is a powerful oxidizing agent, with the formula Mg(ClO4)2.
Magnesium perchlorate decomposes at 250 °C.[1] The heat of formation is -568.90 kJ mol-1.[2]
The enthalpy of solution is quite high, so reactions are done in large amounts of water to dilute it.
It is sold under the trade name anhydrone.
It was used as desiccant to dry gas or air samples,[3][4] but is no longer advised due to hazards inherent in perchlorates.[5] It is dried by heating at 250 °C under vacuum.
Magnesium perchlorate is created by the reaction of magnesium hydroxide and perchloric acid.
References
- ↑ CRC Handbook
- ↑ Lange's
- ↑ H. H. Willard, G. F. Smith (1922). "The Preparation and Properties of Magnesium Perchlorate and its Use as a Drying Agent". Journal of the American Chemical Society 44 (10): 2255–2259. doi:10.1021/ja01431a022.
- ↑ L. Wu, H. He (1994). "Preparation of perlite-based magnesium perchlorate desiccant with colour indicator". The Chemical Educator 41 (5): 633–637. doi:10.1016/0039-9140(94)80041-3.
- ↑ W. L. F. Armarego and C. Chai (2003). Purification of laboratory chemicals. Oxford: Butterworth-Heinemann. ISBN 0-7506-7571-3.
|