Machin series

"Machin head" redirects here. Not to be confused with Machine head.

The Machin series /ˈmeɪtʃɪn/ of postage stamps is the main definitive stamp series in the United Kingdom, used since 5 June 1967. It is the second series to figure the image of Elizabeth II, replacing the Wilding series.

Designed by Arnold Machin, they consist simply of the sculpted profile of the Queen and a denomination, and are almost always in a single colour.

After four decades of service, the series has encompassed almost all changes and innovations in British stamp printing. This has been encouraging an abundant specialised philatelic collectors' market and associated literature.

Arnold Machin's 1964 effigy of the Queen was replaced on British coins in 1984 by an older-looking effigy by Raphael Maklouf, and then replaced again in 1998. However, the effigy on British stamps has never been updated, and the last proposals to these ends were rejected by the Queen herself.

Genesis

Since the accession of Elizabeth II in 1952, the definitive series figured a three-quarter photograph of the Queen by Dorothy Wilding. The same effigy had appeared on commemorative stamps too.^[1] However, the Wilding design did not please some artists. In a letter of April 1961, Michael Goaman and Faith Jacques argued that it represented the Queen, but not the monarchy. They complained it embarrassed the commemorative stamps' designers because the photograph took up one third of the stamp's area and it imposed a perspective on a two-dimensional design.^[2]

Some new designs were discussed but concerns over the technical aspects (a photograph or a painting inspired by a photograph) delayed a full competition for artists until 1965. Postmaster General Tony Benn and artist David Gentleman failed in their attempts to have the royal head replaced by the name of the country ("Great Britain" or "U.K."),^[3] but were permitted to explore temporary solutions to the commemorative head problems. This would of course have removed the uniqueness of the United Kingdom in being the only producer of postage stamps not to have its country name on its stamps in honour of its origination of the adhesive postage stamp in 1840. In 1966 Gentleman created a small single-coloured profile from a coin by Mary Gillick.^[4] The project waited until the miniaturisation of the new definitive effigy that the Stamp Advisory Committee (SAC) had advised the Postmaster General on 13 January 1965 be chosen, from profiles and engraved images based on a photograph.^[5]

The first essays were submitted by Andrew Restall and Arnold Machin with Harrison and Sons printers' assistance. They worked from photographs by Anthony Buckley, then from ones by Lord Snowdon, the Queen's brother-in-law.^[6] Machin had just finished work on the new coin's effigy based on the photographer's pictures. The competition began with more artists officially invited during Summer 1965,^[7] but at a meeting on 26 January 1966, the SAC's members decided to let only Gentleman and Machin continue work on the design.^[8][9]

Arnold Machin's method was to sculpt a bas-relief in clay and moulds, which he reworked and corrected depending on what the SAC required. The printing essays were then done by Harrisons & Sons from photographs of the sculpture, completed with the additions and adornments by designer Machin. Quickly, he decided to simplify the effigy with just the Queen wearing a tiara and the four regional flower emblems, like the Wilding series. Yet these flowers were also dropped: Machin's design would eventually have only the Queen's profile and the value of the stamp.^[10][11]

In March 1966, the Stamp Advisory Committee decided to make new photographs of the Queen available to Gentleman and Machin. They were taken by John Hedgecoe on the following 22 June. Elizabeth II selected the pictures to be given to the artists and Gentleman continued work on the "photographic alternative" to Machin's sculpture.^[12]

During the second period of 1966, Machin replaced the tiara with the George IV State Diadem on request of the SAC, the same diadem as was previously seen on the Penny Black.^[13] The Queen asked for a corsage at the bottom of her sculpted neck.^[14] The final sculpture is a rectangle of plaster, 16 inches long and 14 inches wide, kept in a London-based British Postal Museum & Archive vault.^[15]

The last adjustments to the final plaster image and to the lighting during photography created four effigies. They were unveiled to philatelists on the pre-decimal stamps, the first ones issued 5 June 1967.^[16]

Concerning the original colours, Machin encouraged the use of a clearer effigy on a single-coloured background.^[17] The 4 pence ("4d") was given a very dark brown, inspired by the Penny Black and requested by the Queen herself.^[16] But the Post Office did not fully respect Machin's views and in the first years of the series would also issue bi-coloured stamps and clear-to-dark gradated backgrounds.

Evolutions

From the philatelic point of view, the "Machins" are far more complex than the simple design might suggest, with well over a thousand varieties of colour, value, gum, phosphor banding, etc., known. Since the first stamps were issued pre-decimalisation, they exist in both old and new currencies. As postal rates changed, new denominations became necessary; the design has been adjusted periodically, for instance to use a gradient shade in the background; perforations have been changed; and so forth. In addition, for the regional stamps of 1971, regions' symbols designed by Jeffery Matthews^[18] were added to the basic design.

Initially the stamps were produced by Harrison & Sons using photogravure, with the high-value designs being larger and engraved. Starting around 1980, The House of Questa and Waddingtons Security Print also took up Machin printing in order to keep up with demand, producing their versions via lithography.

Apart from the many values of normal-sized stamps, there have been two different formats used for "high-value" definitives. In 1969 a larger and more square format was used to issue stamps of 2/6, 5/-, 10/- and £1 face value, and was used again in 1970 for the decimal currency values of 10p, 20p and 50p. (The £1 stamp had the lettering re-designed in 1972 and was re-issued. This version is usually seen as a 'decimal' edition as opposed to the 'pre-decimal' stamp.) In 1977 a taller portrait format was used for the large £1, £2, and £5 stamps, and also at various times between 1983 and 1987 for the odd values of £1.30, £1.33, £1.41, £1.50 and £1.60. These values were withdrawn after the introduction of the "Castles" high-value stamps of 1988.

In 1989, as a workaround to the problem of fast-changing rates, "non-value indicator" (NVI) Machins used textual inscriptions "1st" and "2nd" to indicate class of service rather than a numeric value. The following year saw the first commemorative adaptation of the design, with the classic William Wyon profile of Queen Victoria appearing behind and to the left of Elizabeth, marking 150 years of British stamps.

1993 saw the introduction of both self-adhesive stamps and elliptical perforations on the lower vertical sides of them, the latter as a security measure.^[19]

On the high value stamps, "Iriodin"^[20] ink was used to give them a shiny appearance and ensure the difficulty of their reproduction.^[21]

In February 2009, security features were increased on "Machin" self-adhesive stamps to avoid the reuse of uncancelled used stamps retrieved on mail. Both the effigy and the background were printed with continuous "ROYAL MAIL" iridescent printing. Two ellipsoidal shear panels were added to each stamp and the water soluble layer between the stamp and the adhesive was abandoned. These two later features were intended to render the stamps difficult to take off mail and to store for reuse (but in effect are easily overcome by the careful use of a sharp knife edge).^[22] Collectors are advised to not attempt to soak such stamps off, but to save them on pieces cut from the envelope.^[23]

The security features also included a minute change to the background printing of "ROYAL MAIL" where one letter is replaced to identify the source of the stamp. For example, instead of "ROYAL MAIL" in one place in the upper right of the stamp is printed "FOYAL MAIL" to indicated that that stamp came from a booklet of four stamps. This feature made it easier to identify the source of an individual, used stamp and track down production problems.

Colours

The most striking aspect of the Machins is the rainbow of colours. Since the designs are all identical (or nearly so), it was critical that each denomination be produced in an easily-distinguished colour. Worse, the likelihood of rate changes meant that additional colours would be necessary, since old stamps were still valid and could appear on mail.

The initial palette of 14 colours was chosen after extensive testing. While most were solid colours, the 1/6d and 1/9d used different colours for effigy and denomination, while the 10d and 1/- had backgrounds that varied from darker on the left side to lighter on the right. The dark olive-brown shade of the 4d value, the most often-used stamp of the time, was personally selected by the Queen as being the available colour most reminiscent of the Penny Black. However, in practice this proved difficult to distinguish from the 5d's dark blue, automated machinery could not always see the phosphor bands on the stamps, and even football pool organizers complained that it was too hard to read the date and time of cancellations. In 1969, the 4d value was changed to vermilion, which in turn required a colour change for the 8d, which was reissued in "eggshell blue".

In preparation for decimalisation in 1971, the BPO prepared a new palette of colours, enlisting the Applied Psychology Unit of the Cambridge University to test individuals' abilities to quickly identify colours. The results pruned a selection of 25 down to the 14 used for the decimal stamps.

During the 1970s a third effigy/ background colour format emerged in addition to the existing light head-dark background and the light head-graded background; the new variation consisted of head the same colour as the background, with just the shaded detail picking out the image. (In more recent years the light head-dark background has become near universal.)

Over the years, rate changes required new denominations, and in order to make colours available, older stamps had to be withdrawn. For instance, the 11p rose of 1976 was withdrawn in 1980, and the colour reused in 1983 for a 23p stamp. A re-introduced denomination could not normally get its old colour back though; the light green 17p of 1980 was withdrawn in 1981, reissued in steel blue in 1983, withdrawn 1986, and reappeared yet again in 1990, this time in dark blue.

In 1983, Aubrey Walker of the Royal Mail's R&D department proposed a fixed assignment of colours to rates, on the theory that the classes of service changed much less frequently than rates. This still did not solve the problem of clerks detecting usage of old stamps with lower rates - they would have had to read the denomination rather than just glance at the colour – and so a system of "light" and "dark" colours was suggested, the two variants alternating at each rate change. Artist Jeffery Matthews was then hired to develop the actual colours, and in 1985 presented eight pairs totalling 16 colours. The colour pairing idea turned out to be unworkable, but the colours were adopted, and in 1988 Matthews developed another 15 as rates continued to be changed.

Machin head replacement

On three occasions, postal sources have confirmed that a replacement for the Machin series was proposed by the Post Office, and its successor, the Royal Mail. But, the Queen herself has subsequently rejected the proposed designs.

In March 1981, after Raphael Maklouf's effigy was chosen to appear on new issue coinage, a proposal was made to replace the Machin's effigy by 1983; in time for the 30th anniversary of the Queens's coronation.^[24] The Post Office's Ron Dearing obtained agreement from the Queen, even if she expressed through a letter by her deputy private secretary that "Her Majesty is very content with the Machin effigy and thinks that a work of real quality is required if this is to be replaced."^[25]

Under the supervision of Post Office design adviser Barry Robinson, Jeffery Matthews prepared alternative essays from March 1982 pictures of the Queen by Lord Snowdon. Matthews used many different positions of the head and shoulders, from profile to full-face. Essays with the latter position were designed from the photographic representation and from a portrait drawn by his son Rory Matthews.^[26] In 1983, Robinson ordered new portraits by different artists : drawn by John Sargeant, painted by Timothy Whidborne and Brian Sanders, later engraved by Czesław Słania in 1984. Harrisons and Sons printed these essays. But, they failed to please the Stamp Advisory Committee.^[27]

In June 1985, a new working group proposed a change to the original Machin stamp design. It comprised a bicoloured (grey effigy on a coloured background); Jeffery Matthews then worked on a different cut of the shoulders and neck, for a horizontal stamp.^[28] As Arnold Machin must be informed on any modifications of his original design, Barry Robinson and Jeffery Matthews visited him on 23 October 1985. Machin refused any changes by anyone except himself and didn't appreciate being approached after the proposed changes were finalised.^[29]

Following the abandonment of all of the proposed changes during the 1980s, some of Jeffery Matthews's designs were later used: the horizontal format served for the first self-adhesive stamps in 1993 and for the "higher rate" stamps of 2006.

Another attempt to alter the design was proposed on the occasion of the 150th anniversary of the Penny Black in 1990. The Queen's decision not to agree to any changes swiftly ended the move.^[30]

Ever changing Machins

From the initial Harrison printings through to the present there has always been a wealth of study material for the Machin collector of any level. The fact that printers and printing methods change so frequently means that collecting Machin stamps remains popular^{[citation needed]}. As is usual with a new printer, such as happened when Enschede, Waddington, Questa and Walsall were engaged, subtle changes occur giving rise to new varieties. The latest printer to be awarded considerable printing contracts for Machins is Cartor. Cartor however has given collectors a new strand of Machin types from its Prestige Booklet panes and later mini-sheets to expand collections even more.

Prestige Booklet Panes

There has been a series of Prestige Booklet Panes produced since the first "Wedgwood" prestige booklet of 16 April 1980 starting with the "Stanley Gibbons" issue of 19 May 1982, consisting of a 3-square panel of 9 stamps or 8 stamps with a central non-value label. They are given the Royal Mail designation "DX" and are:

Designation	Description	Date
DX1	£1 Wedgwood	18 April 1980
DX2	£3 Wedgwood	18 April 1980
DX3	Stanley Gibbons	19 May 1982
DX4	Royal Mint	14 September 1983
DX5	Christian Heritage	4 September 1984
DX6	The Times	8 January 1985
DX7	British Rail	18 March 1986
DX8	P&O	3 March 1987
DX9	Financial Times	9 February 1988
DX10	Scots Connection	20 March 1989
DX11a	London Life	20 March 1990
DX11b	The Penny Black	6 May 1990
DX12	Agatha Christie	19 March 1991
DX13	Wales	25 February 1992
DX14	Tolkien	27 October 1992
DX15	Beatrix Potter	10 August 1993
DX16	Northern Ireland	26 July 1994
DX17	National Trust	23 April 1995
DX18	European Football	14 May 1996
DX19	BBC	23 September 1997
DX20	Definitive Portrait	10 March 1998
DX21	Breaking Barriers	13 October 1998
DX22a	Profile on Print (8)	16 February 1999
DX22b	Profile on Print (9)	16 February 1999
DX23	World Changers	21 September 1999
DX24a	Special by Design(8)	13 February 2000
DX24b	Special by Design(9)	13 February 2000
DX25a	Queen Mother (Machin)	4 August 2000
DX25b	Queen Mother (regional)	4 August 2000
DX26	Treasury of Trees	18 September 2000
DX27	Flags and Ensigns	23 October 2001
DX28a	Golden Jubilee (Machin)	6 February 2002
DX28b	Golden Jubilee (Wilding)	6 February 2002
DX29	Astronomy	24 September 2002
DX30	The Secret of Life	25 February 2003
DX31	Coronation	2 June 2003
DX32	Letters by Night	16 March 2004
DX33	R H S	25 May 2004
DX34	Charlotte Brontë	24 February 2005
DX35	Trafalgar	18 October 2005
DX36	Brunel	23 February 2006
DX37	Victoria Cross	21 September 2006
DX38	World Of Invention	1 March 2007
DX39	Machin	5 June 2007
DX40	Army Uniforms	20 September 2007
DX41	James Bond	6 January 2008
DX42	RAF Uniforms	18 September 2008
DX43	Regionals	29 September 2008
DX44	Design Classics	13 January 2009
DX45	Darwin	12 February 2009
DX46a	Treasures of the Archive	18 August 2009
DX46b	Treasures of the Archive	18 August 2009
DX47	Royal Navy Uniforms	17 September 2009
DX48a	Classic Album Covers	7 January 2010
DX48b	Classic Album Covers	7 January 2010
DX49	The Royal Society	25 February 2010
DX50a	King George V	6 May 2010
DX50b	Festival of Stamps	8 May 2010
DX51	Britain Alone	13 May 2010
DX52	WWF	23 April 2011
DX53	Morris & Co	5 May 2011

The wrong typeface

All printers have in recent years been given a technical brief on printing Machin stamps from Royal Mail and Cartor would have had^{[citation needed]} the same brief. To reduce the risk of any mistakes the brief would set the standard for every element of the stamp including the typeface to used for the value. The standard typeface used currently throughout the Machin issue is a modern Garamond, however it would appear^{[citation needed]} that Adobe has a quite different "5" character. This value made an appearance on the 5p Deep Ash Pink value of the Classic Album Covers pane of 7 January 2010, though it has since been corrected on all other printings. Quite how this came to be printed with this incorrect font has not been explained, although differences in type fonts are not new and can easily be seen on the early NVI gold issues.

Mini sheet printings

The best quality^{[citation needed]} Machins are to found in the eight values of the Colour Palette mini-sheet printed in photogravure by de la Rue and the eleven stamps of the 2010 Festival of Stamps mini-sheet printed in lithography by Cartor. Both sheets were superbly^{[citation needed]} printed and gave rise to all-new types and sub-types.

Overseas

Crown Dependencies

The first British stamps of the Machin series served as such in the Crown Dependencies before their postal independence: Guernsey and Jersey until 1969 and the Isle of Man until 1973.

In Guernsey, the royal effigy on commemorative stamps was sometimes in the first years the Machin series effigy before the Royal Cypher was used (EIIR pour Elizabeth 2 Regina).

Hong Kong

In the British colony of Hong Kong, the last definitive series figuring Queen Elizabeth II was an adapted version of the British Machin stamp. The effigy is put to the right side of the illustration to make place for the place name in Chinese characters. The background is bicolour.

The first values were issued in June 1992.^[31] Many commemorative minisheets used the Hong Kong Machin stamp to mark philatelic events and the last moments of the British rule on the colony.

To prepare the sovereignty of the People's Republic of China in July 1997, the Machin series was replaced in January 1997 by a new definitive series showing the urban panorama of Hong Kong.^[32]

Somaliland

In April 1996, the United Kingdom one penny Machin stamp was overprinted and used for a few days in Somaliland,^[33] a state that self-declared its independence from Somalia in 1991.

Due to an insufficient stock of paper, the British printer Harrison and Sons could not deliver in time a stamp issue ordered for Somaliland. Because of the lack of postage stamps there, it was decided to overprint "REPUBLIC / OF / SOMALILAND / 500 SHILLIN" 4'300 British one penny definitive stamps available at Harrison. The overprint was applied in Somaliland.^[33]

However, the stamps were quickly withdrawn and destroyed.

References and sources

Sources of the articles

Books

• Muir, Douglas (2007). A Timeless Classic. The evolution of Machin's Icon. The British Postal Museum & Archive and Royal Mail. p. 236. ISBN 978-0-9553569-1-9.  With the genesis of the Machin effigy, the author, curator of the BPMA, described the context of philatelic creation in Great Britain during the second half of the 1960s.
• Myall, Douglas (2007). "40 Years of Machins. A Timeline". British Philatelic Bulletin #13 (London: Royal Mail). p. 20. OCLC 784947864.  This book is a chronology of the Machin series main evolutions.

Articles

• West, Richard (June 2007). "Birth of an Icon". Stamp Magazine 73 (6): 42–47.  Article about the pre-decimal Machin stamps (1966–1971).
• West, Richard (June 2007). "Sold by the pound". Stamp Magazine 73 (6): 50–54.  Topical article centered on the £1 Machin stamps, throughout the series, with a chronology of the contracted printers.
• David Alderfer and Larry Rosenblum, "Colors of Machins were carefully considered", Linn's Stamp News, 8 July 1996.
• Larry Rosenblum, "Machins rainbow barely keeps up with needs", Linn's Stamp News, 12 August 1996.

Notes

Specialised bibliography

In English :

• Myall, Douglas. The Complete Deegam Machin Handbook.  The third and last printed edition was published in July 2003 (2 volumes, 1272 pages), with regular supplements written. A CD-ROM version was edited in April 2005, and a CD-ROM-only fourth edition was published in May, 2010.^[1]
• QE II Specialised Catalogue. Machin Collectors Club.  Formerly Machin Specialised Catalogue, last updated in 2010 (2 volumes) with gummed stamps in the first volume, self-adhesives and booklets in the second one.
• The Stanley Gibbons Great Britain Specialised catalogue : volume 3 about pre-decimals and volume 4 after decimalization.

In French :

• Boulangier, François. Les Émissions de Grande-Bretagne au type Machin en valeurs décimales. Club philatélique franco-britannique.  Fourth edition edited in June 2001.

External links

• Great Britain Machins by The 'Machin Nut' (Robin Harris), specialised listings by face value.
• Machin Mania, specialised site with news pages.