Luminous energy

From Wikipedia, the free encyclopedia

In photometry, luminous energy is the perceived energy of light. This is sometimes called the quantity of light. Luminous energy is not the same as radiant energy, the corresponding objective physical quantity. This is because the human eye can only see light in the visible spectrum and has different sensitivities to light of different wavelengths within the spectrum. When adapted for bright conditions (photopic vision), the eye is most sensitive to light at a wavelength of 555 nm. Light with a given amount of radiant energy will have more luminous energy if the wavelength is 555 nm than if the wavelength is longer or shorter. Light whose wavelength is well outside the visible spectrum has a luminous energy of zero, regardless of the amount of radiant energy present.

The SI unit of luminous energy is the lumen second, which is unofficially known as the talbot in honor of William Henry Fox Talbot. In other systems of units, luminous energy may be expressed in basic units of energy.

See also

SI photometry units
Quantity Unit Dimension Notes
Name Symbol[nb 1] Name Symbol Symbol
Luminous energy Qv [nb 2] lumen second lm⋅s T⋅J [nb 3] units are sometimes called talbots
Luminous flux Φv [nb 2] lumen (= cd⋅sr) lm J [nb 3] also called luminous power
Luminous intensity Iv candela (= lm/sr) cd J [nb 3] an SI base unit, luminous flux per unit solid angle
Luminance Lv candela per square metre cd/m2 L−2⋅J units are sometimes called nits
Illuminance Ev lux (= lm/m2) lx L−2⋅J used for light incident on a surface
Luminous emittance Mv lux (= lm/m2) lx L−2⋅J used for light emitted from a surface
Luminous exposure Hv lux second lx⋅s L−2⋅T⋅J
Luminous energy density ωv lumen second per metre3 lm⋅s⋅m−3 L−3⋅T⋅J
Luminous efficacy η [nb 2] lumen per watt lm/W M−1⋅L−2⋅T3⋅J ratio of luminous flux to radiant flux
Luminous efficiency V 1 also called luminous coefficient
See also: SI · Photometry · Radiometry
  1. ↑ Standards organizations recommend that photometric quantities be denoted with a suffix "v" (for "visual") to avoid confusion with radiometric or photon quantities. For example: USA Standard Letter Symbols for Illuminating Engineering USAS Z7.1-1967, Y10.18-1967
  2. ↑ 2.0 2.1 2.2 Alternative symbols sometimes seen: W for luminous energy, P or F for luminous flux, and ρ or K for luminous efficacy.
  3. ↑ 3.0 3.1 3.2 "J" here is the symbol for the dimension of luminous intensity, not the symbol for the unit joules.



This article is issued from Wikipedia. The text is available under the Creative Commons Attribution/Share Alike; additional terms may apply for the media files.