Long Boiler locomotive
The Long Boiler locomotive was the object of a patent by Robert Stephenson and the name became synonymous with the pattern.
History
It is generally perceived that it arose out of attempts to match the power of broad gauge locomotives within the limitations of the loading gauge of Stephenson railways. However, the patent originally arose from a problem which became apparent as trains travelled longer distances, specifically on the North Midland Railway in England around 1841, where fire tubes and smokeboxes were becoming destroyed by the heat.
Experiments at the North Midland's Derby Works showed temperatures as high as 773 degrees Fahrenheit, determined by placing a small cup of zinc within the smokebox beneath the chimney. Stephenson extended the boiler, and hence the firetubes, from the usual nine feet to thirteen or fourteen feet. Placing tin in the firebox, he found that it just began to melt, indicating a temperature of 442 degrees.
Having tested the design on the North Midland line between Derby and Leeds, Stephenson took out a patent in 1842 for what he referred to as a "Long Boiler" engine. To protect his patent, he realised that he should not specify an exact length.
Meanwhile, the prevailing view was that the centre of gravity should be as low as possible, which limited the size of the driving wheels, and incidentally precluded the use of inside cylinders.
The initial locomotives were of 2-2-2 wheel arrangement to accommodate the extra length. However, with the outside cylinders, the engines were extremely unsteady, swaying from side to side. This led Stevenson to bring the rear wheels forward in the 4-2-0 formation, with the cylinders between the leading wheels. Such an engine was the "Great A" which took part in the Gauge Trials. This however, left the firebox behind the wheels and was therefore limited in size and weight. Moreover, the long rigid chassis made bends difficult to negotiate and damaged the track. The classical long-boiler locomotive, then, was powerful but slow. It was ideal for goods trains, one example surviving as the North Eastern Railways Class 1001.
The opposite point of view was taken by John Gray, who designed a number of engines for the London and Brighton Railway. His engines were the inspiration for David Joy in his design for the Jenny Lind locomotive, which compensated for the size of its boiler by greater efficiency and a pressure of some 120 psi.
The long boiler design, on the other hand, was taken to its extreme by the Crampton locomotive which utilised a larger driving wheel by placing it behind the firebox.
References
- Lowe, J.W., (1989) British Steam Locomotive Builders, London: Guild Publishing
- Ransome, P.J.G., (1990) The Victorian Railway and How it Evolved, London: Heinemann