Liberation Class

From Wikipedia, the free encyclopedia
Liberation class 2-8-0 locomotive

Polish Tr202-19 in a heritage park in Chabówka.
Specifications
Power type Steam
Builder Vulcan Foundry (120),
Đuro Đaković (10)
Serial number VF 5357–5476
Build date 1946 (120), 1957–58 (10)
Configuration 2-8-0
UIC classification 1′D h
Gauge 1,435 mm (4 ft 8 12 in)
Driver diameter 4 ft 9 18 in (1.451 m)
Water capacity 5,500 imp gal (25,000 l; 6,600 US gal)
Boiler pressure 232 psi (1.60 MPa)
Cylinders Two, outside
Cylinder size 21.625 in × 28 in (549 mm × 711 mm)
Tractive effort 45,200 lbf (201.1 kN)
Career
Railroad(s) CFL · ČSD ·  · PKP
Number CFL: 4701–4710,
ČSD: 459.001–459.015,
JŽ: 38.001–38.075,
PKP: Tr202.1–Tr202.30

The Liberation Class was a class of 2-8-0 steam locomotives designed for heavy freight work in post-Second World War Europe. 120 were built by the Vulcan Foundry of Newton-le-Willows in 1946.

Design

They shared some features with the earlier WD Austerity 2-8-0 and WD Austerity 2-10-0 which in turn had been based on the LMS Stanier Class 8F. They were however built to the continental loading gauge, but the design was intended to last, not a short-term kriegslok.

Distribution

Ten went to Luxembourg and the rest to Eastern Europe. The United Nations Relief and Rehabilitation Administration distributed them as follows:


References

    External links


    This article is issued from Wikipedia. The text is available under the Creative Commons Attribution/Share Alike; additional terms may apply for the media files.