Leeboard
A leeboard is a lifting foil used by a sailboat, much like a centerboard, but located on the leeward side of the boat. The leeward side is used so that the leeboard is not lifted from the water when the boat heels, or leans under the force of the wind.
History
Leeboards existed in China from at least the eighth century on warships that "held the ships, so that even when wind and wave arise in fury, they are neither driven sideways, nor overturn".[1]
Leeboards have been used by relatively large inshore sailing vessels used for transport since 1570, such as Dutch barges and Thames barges. For these boats, leeboards provided the advantages of shallow draught for working close inshore and an unobstructed hold for cargo. They were also easier to build than a large centreboard would have been.
Current designs
Leeboards are no longer common in commercially built boats, because many people consider them inelegant and awkward. They are far more common in home-built boats, especially the Puddle Duck Racer and stitch and glue type sailboats. Leeboards simplify construction of the hull, as they are attached to the outside and do not require holes in the hull, which can leak. Since centerboards are retractable, they require a large, watertight trunk to hold them in place when retracted, and this occupies what otherwise might be useful space in the cabin or cockpit of the boat. Use of leeboards, while it adds complexity to the process of tacking, leaves the floor of the boat unobstructed.
According to traditional design principles, a boat utilizing a leeboard either needs to have two retractable leeboards, one on each side, or a method of removing the leeboard and attaching it to either side while under way, because nearly all sailboats tack to work their way upwind (with the exception of the proa). However, some small sailboat designers claim to have created seaworthy vessels with only a single, fixed leeboard.[2][3]
On a traditional two-leeboard (or non-fixed leeboard) design, they are designed so that the windward board can be retracted when it isn't needed to reduce drag. Unlike centerboards, which are symmetric along the boat's axis, leeboards are often asymmetric, so they more efficiently provide lift in one direction only. Some fast racing scows use bilgeboards, which are mounted between the centerline of the hull and the sides, specifically so that they can use a pair of asymmetric foils for maximum lift and minimum drag.
See also
References
- ↑ Li Ch'üan (759). Manual of the White and Gloomy Planet. cited by Robert Temple (1986). The Genius of China. Simon and Schuster.
- ↑ "The Tridarka Raider: A Trimaran for Coastal Vagabonds: Deck Plan". WaterTribe. Retrieved 2011-02-08.
- ↑ Mike Mulcahy (May 2006). "My Take on Philsboat". Duckworks Magazine. Retrieved 2011-02-08.
External links
Wikimedia Commons has media related to Leeboards. |