LMS Turbomotive
| LMS Turbomotive | |
|---|---|
| Specifications | |
| Power type | Steam Turbine-mechanical |
| Designer | William Stanier |
| Builder | LMS Crewe Works |
| Build date | 1935 |
| Configuration | 4-6-2 |
| UIC classification | 2'C1'turb.h |
| Gauge | 4 ft 8 1⁄2 in (1,435 mm) |
| Leading wheel diameter | 3 ft (0.91 m) |
| Driver diameter | 6 ft 6 in (1.98 m) |
| Trailing wheel diameter | 3 ft 9 in (1.14 m) |
| Length |
74 ft 4 1⁄4 in (22.663 m) (orig.) 74 ft 0 1⁄4 in (22.562 m) (rebuilt) |
| Locomotive weight |
110.55 long tons (112.32 t) (orig.) 105.20 long tons (106.89 t) (rebuilt) |
| Fuel type | Coal |
| Fuel capacity | 9 long tons (9.1 t) |
| Water capacity | 4,000 imp gal (18,000 l; 4,800 US gal) |
| Boiler | LMS type 1 |
| Boiler pressure | 250 psi (1.7 MPa) |
| Firegrate area | 45 sq ft (4.2 m2) |
| Heating surface: – Firebox | 217 sq ft (20.2 m2) |
| Career | |
| Railroad(s) |
London, Midland & Scottish British Railways |
| Power class |
LMS: 7P BR: 8P |
| Number |
LMS 6202 BR: 46202 |
| Disposition | Rebuilt as conventional reciprocating-steam locomotive in 1952, wrecked same year, scrapped. |
The Turbomotive was a modified Princess Royal Class steam locomotive designed by William Stanier and built by the London, Midland and Scottish Railway in 1935.[1] It used turbines instead of cylinders. It was later rebuilt as a conventional locomotive 46202 Princess Anne.
The forward turbine had 18 rows of blading. Output was 2,400 hp (1,800 kW) at 7060 rpm, corresponding to running at 62 mph (100 km/h). Boiler pressure was 250 psi (1.7 MPa). The turbine was designed to operate into a maximum back-pressure of 2 psi (14 kPa), allowing a conventional double blast-pipe to provide the boiler draught, and eliminating draught fans, which always seemed to give a disproportionate amount of trouble.
The reverse turbine had 4 rows of blades. It was engaged by a dog clutch, activated when the reverser lever being set to "0". This was originally steam-operated by a small piston and cylinder.
46202 Princess Anne
46202 was rebuilt as a conventional locomotive in 1952, using new mainframes and a spare set of cylinders from a "Coronation" class locomotive,[citation needed] and named Princess Anne.[2] On 8 October 1952, after only two months in service, it was the train engine of the double headed Liverpool and Manchester express involved in the Harrow and Wealdstone railway accident. The locomotive was taken to Crewe, where it was decided it was beyond economical repair and scrapped. Parts of the frames were used to repair another damaged locomotive, No. 46242.[citation needed] The destruction of No. 46202 led to the construction of BR Standard Class 8 number 71000, Duke of Gloucester.
See also
References
- ↑ "News in a Nutshell". British Pathe. Jul 11, 1935. Retrieved 2009-12-17.
- ↑ Goodman, John (1994). Greenwood, William, ed. LMS Locomotive Names. Lincoln: RCTS. p. 86. ISBN 0-901115-79-7.
- Nock, O.S. (1966). "9: Unconventional Locomotives 1929-1935". The British Steam Railway Locomotive. II, from 1925 to 1965. Ian Allan. pp. 112–117. ISBN 0-7110-0125-1.
Literature
- Livesay, Edward H. (5 January 1940). "Turbine Locomotive Experiences, No.I". The Engineer 169: 366–368.
- Livesay, Edward H. (26 April 1940). "Turbine Locomotive Experiences, No.II". The Engineer 169: 390–391.
- Livesay, Edward H. (3 May 1940). "Turbine Locomotive Experiences, No.III". The Engineer 169: 410–411.
- Livesay, Edward H. (10 May 1940). "Turbine Locomotive Experiences, No.IV". The Engineer 169: 430–432.
External links
| |||||||||||||||||||||||