Knute hitch

From Wikipedia, the free encyclopedia
Knute hitch
Category Hitch
Related Marlinespike hitch
Releasing non-jamming
Typical use Attaching a lanyard to a tool

The Knute hitch is used to attach a lanyard of small stuff to a marlingspike or other tool. Rigger Brion Toss named the hitch after his favourite marlingspike of the same name,[1] although the hitch is likely much older.[2]

Tying

The lanyard line should be just small enough to fit doubled through the lanyard hole in the tool. The end, with a figure-eight knot stopper, is placed into the protruding bight and then the bight is withdrawn, jamming in the hole. To release, pull on the end and remove it from the bight.

References

  1. Toss, Brion (1992). The Rigger's Locker - Tools and Techniques for Modern and Traditional Rigging. International Marine. p. 105. 
  2. Budworth, Geoffrey (1999). The Ultimate Encyclopedia of Knots & Ropework. London: Hermes House. p. 102. 

External links

This article is issued from Wikipedia. The text is available under the Creative Commons Attribution/Share Alike; additional terms may apply for the media files.