James Brunlees

Sir James Brunlees
Sir James Brunlees
Born	1816 Kelso, Scottish Borders
Died	1892 Wimbledon, London
Nationality	Scottish
Education	University of Edinburgh
Spouse(s)	Elizabeth Kirkman (1845)
Parents	John Brunlees, Margaret Rutherford
Engineering career
Engineering discipline	Civil
Institution memberships	Fellow of the Royal Society of Edinburgh, Institution of Civil Engineers (president),

Sir James Brunlees (1816–1892) was a Scottish civil engineer. He was born in Kelso in the Scottish Borders in 1816.^[1]

Early life

Brunlees was the son of the gardener of the Duke of Roxburghe's agent. As a youth he assisted the surveyor Alexander Adie in surveying the roads on the Duke's estates and decided to be a civil engineer. He studied at Edinburgh University then worked on the Bolton and Preston Railway under Adie before working on various railways in Scotland and Northern England in a staff of engineers.^[2]

Londonderry and Coleraine Railway

In 1850, Brunlees worked on the Londonderry and Coleraine Railway. For this job he was obliged to build an embankment over Rosse’s Bay on the River Foyle, surmounting great difficulties.^{[3] [4]}

Railway across Morecambe Bay

Brunlees was the Construction Engineer for the Ulverston and Lancaster Railway. This was a short but difficult and important railway to link the Furness Railway network to the Lancaster and Carlisle Railway line and thence to all points further south in the British network. The route was planned by McClean and Stileman at 19 miles in length of which ten miles comprised embankments and viaducts across tidal water. Much of this was sand running to a depth of 30 to 70 feet. This made it very challenging to build. In business terms the Manchester-based railway contractors John Brogden and Sons were the prime movers of this railway.

The Ulverstone and Lancaster Railway Act received the Royal Assent on 24 July 1851 but work was not in full progress until September 1853 because workers and accommodation for them were not readily available. McClean and Stileman had resigned as engineers in the previous February so another engineer had to supervise construction. Brunlees was chosen because of his success with the River Foyle project.

The line was opened on 26 August 1857. Brunlees wrote a paper on this project for the Institution of Civil Engineers in which he described the design profile of the embankments and a novel design of drawbridge for the viaducts to withstand the winds and waves.^[3] His work on the U&L earned him praise from men like Locke and Hawkshaw.^[4] Viaducts were built across the estuaries of the rivers Kent and Leven and these were designed and built by W & J Galloway & Sons of Manchester using a novel piling system involving waterjets.^[4][5]

Railway across the Solway Firth

James Brunlees was the engineer of the Solway Junction Railway. This involved a 1 mile 8 chains (1.8 km) cast-iron girder viaduct between Bowness-on-Solway and Annan across the Solway Firth in Scotland. It had 193 spans with 2,892 tons of cast iron for the piles and 1,807 tons of wrought iron. The Act of Parliament was passed in 1864 and the railway was opened in 1869.

Unfortunately in 1875 and 1881 the viaduct was damaged by ice. In 1881 the damage was severe and there was a Board of Trade Inquiry. The inspecting officer said that because of the thickness of ice, the size of the ice-floes, and the absence of wind, it was not surprising that the cast-iron columns had not withstood the shock. This method of construction should be avoided in estuaries where the climate was subject to sudden changes in temperature and to blows from floating ice. He had no objection to rebuilding the viaduct but recommended modifications to prevent a repetition. He did not criticise anyone however, perhaps because this type of engineering was new and everyone was learning.^[6]

São Paulo, Brazil

Brunlees became engineer of the São Paulo Railway in 1856, with D. M. Fox as assistant. They used cable haulage on a 5 foot 3 inch gauge railway. They used four inclined planes at a gradient of 1 in 9.75 to surmount a 2,650 foot escarpment. The line was completed in 1867.^[2][7]

Other work

Brunlees served as a railway engineer in the construction of the Mersey Railway, connecting Liverpool and Birkenhead.^[7]

He also worked in maritime engineering and was responsible for the construction of the docks at Avonmouth and Whitehaven^[7] as well as the piers at Southport^[4][7] and Southend.^[7]

Brunlees was engineer, as well as one of the leading shareholders and directors, of the Mont Cenis Pass Railway, active mainly during planning and construction, 1864-1868^[2]

There is evidence that Brunlees also worked with the Brogdens on their New Zealand projects^[8][9]

He served as president of the Institution of Civil Engineers between December 1882 and December 1883.^[10] He was knighted in 1886.^[11]

References