Hop-Up (Airsoft)
The term Hop-up [1] describes the back-spin put on Airsoft pellets and BBs to increase their range via the Magnus effect.
Hop-up devices apply backspin to the projectile reducing the air pressure on its top side.[2] This causes the plastic pellet to fall less over a given distance than it would without the spin applied, extending the effective range of the weapon without increasing velocity.
In Airsoft guns, this is usually implemented as a projection (called a bucking) into the path of the projectile, on the top of the barrel. The bucking momentarily hinders the top side of the projectile, imparting a backspin that can exceed 120,000 revolutions per minute. This is usually adjustable so that the effect can be tuned to suit the weight or speed of the projectile and each player's preference.
The primary cause of the lift is the Magnus effect. There is a layer of non-moving air (the boundary layer) on its surface. In the case of a spinning ball, this layer gets thrown off at an angle. Newton's laws state that in order for air to be thrown in one direction, the ball has to move in the opposite direction. According to the Magnus explanation, the rotating ball would throw air downward and to the rear, thus giving lift. The air on the bottom of the ball is slowed down, so when the separated air comes back together, it is lower than the middle of the ball, appearing like a comet's tail pointing down. This can be verified in wind tunnels and is well documented in fluid dynamics textbooks.
References
- ↑ Kovacs Bloomfield (1 March 2012). Airsoft! How to Win an Airsoft War: Secret Tactics for Success Revealed!. Ebook.GD Publishing. pp. 17–20. ISBN 978-1-61323-030-5.
- ↑ "What is AirSoft?". Air Soft Antlanta. Retrieved 31 October 2013.