Hexaferrum

Hexaferrum and epsilon iron (ε-Fe) are synonyms for the hexagonal close-packed (HCP) phase of iron that is stable only at extremely high pressure. Takahashi and Bassett^[1] at the University of Rochester mixed 99.8% pure alpha iron powder with sodium chloride, and pressed a 0.5-mm diameter pellet between the flat faces of two diamond anvils. The deformation of the NaCl lattice, as measured by x-ray diffraction (XRD), served as a pressure indicator. At a pressure of 130 kbar (13 GPa) and room temperature, the body-centered cubic ferrite powder transformed to the HCP phase in Figure 1. When the pressure was lowered, ε-Fe transformed back to ferrite (α-Fe) rapidly. A specific volume change of −0.20 cm³/mole ± 0.03 was measured. Hexaferrum, much like austenite, is more dense than ferrite at the phase boundary. A shock wave experiment confirmed the diamond anvil results. Epsilon was chosen for the new phase to correspond with the HCP form of cobalt.

The triple point between the alpha, gamma and epsilon phases in the unary phase diagram of iron has been calculated as T = 770K and P = 11 GPa,^[2] although it was determined at a lower temperature of T = 750K (477 °C) in Figure 1. The Pearson symbol for hexaferrum is hP2 and its space group is P6₃/mmc.^[3][4]

Giles et al.^[5] studied the ferrite-hexaferrum transformation metallographically and noted that it is a martensitic rather than equilibrium transformation.

While hexaferrum is purely academic in metallurgical engineering, it may have significance in geology. The pressure and temperature of Earth's iron core are on the order of 1500–3500 kbar and 3000 ± 1000 °C. An extrapolation of the austenite-hexaferrum phase boundary in Figure 1 suggests hexaferrum might be stable or metastable in Earth’s core.^[1]

Figure 1: The epsilon field in the unary iron phase diagram.^[1]

References