Guard band

From Wikipedia, the free encyclopedia
This article is about the use of guard bands in radio communication. For computer graphics, see Guard band clipping. For magnetic tape recording, see Helical scan.

In radio, a guard band is an unused part of the radio spectrum between radio bands, for the purpose of preventing interference.

It is a narrow frequency range used to separate two wider frequency ranges to ensure that both can transmit simultaneously without interfering each other.[1] It is used in Frequency division multiplexing. It may be used in both wired or wireless communications, so that adjacent frequency bands on the same media can avoid interference.

The spectrum can also be licensed for low-power devices such as a private mobile phone network.[2]

References

Look up guard band in Wiktionary, the free dictionary.
  1. ↑ http://www.techopedia.com/definition/7494/guard-band-telecommunications
  2. ↑ http://www.privatemobilenetworks.com/technology/guard-band-spectrum/
This article is issued from Wikipedia. The text is available under the Creative Commons Attribution/Share Alike; additional terms may apply for the media files.