Go-To card

Typical Go-To Card

The Go-To card is a contactless smart card used to pay fares for bus, light rail, and commuter rail lines operated by Metro Transit and other transit agencies in the Twin Cities area of Minnesota. The system has significantly sped up boardings on area buses while alleviating wear and tear on existing ticket machines and fare boxes.

The Go-To card went into full operation in early 2007.

Problems and delays

The Go-To card was originally meant to go into service in September 2003 and become the first such system in the United States, but technical difficulties delayed introduction.^[1] Cubic Transportation Systems, Inc. worked under a contract valued at $16.4 million, but Metro Transit stopped payment at $9.4 million in May 2003 when it became apparent that the rollout would be behind schedule.

Cubic Transportation Systems initially promoted this system as the first contactless smart card installation in the country, but since introduction was delayed, at least one other system in the U.S. went into use ahead of the Go-To card. While traditional smart card systems require the card to be swiped through or inserted into a reader, the Go-To card requires a passenger to tap it against the reading device. This reduces mechanical wear dramatically, and removes the need for readers to be hardened against the sometimes cold and wet climate of Minnesota. Ticket machines on Metro Transit's Blue Line were designed with the Go-To card in mind.

Before this system was sent into full release, some Metro Transit employees and selected area riders were part of a test program, started in the latter half of 2004, using the cards as they go about their daily business. In November 2004 after five months of service, Metro Transit's general manager stated that the devices only achieved 20% reliability.

Cubic said that the issues that were originally delaying introduction were software problems. Frequently, either the reader or the card does not properly detect when it has been used. Software for the central computer system, which handles synchronization and how funds are replenished, was not fully operational until late April 2005.

The underlying technology is Philips' MIFARE system, implementing the ISO/IEC 14443 (Type A) standard.

Full service

In November 2005, Metro Transit allowed 18,000 trial users to begin using the Go-To card system, with hopes of rolling out the cards to all users by the fourth quarter of 2006.

On November 15, 2006, Metro Transit unveiled the Go-To card for 2,500 users to use during a trial period lasting until January 31, 2007. By April 2007, Go-To cards were being sold to the general public at Metro Transit stores. It is also possible to buy and refill cards at other locations that sell transit passes, such as some local grocery stores.

U-Pass

The Metro Transit U-Pass program is a discounted transit pass sold only to University of Minnesota students or employees taking at least one credit of courses. The pass is purchased each semester, is only effective for one semester, and has a mandatory $19 (as of Spring 2013) transportation fee not included with the actual cost of the pass. The University of Minnesota switched to the Go-To card in 2007 which allows for semester renewal up to six years.^[2]

Metropass

The Metropass is a transit pass for trains and buses sold at a discounted rate to employees purchased by local companies.^[3]

College Pass

The Go-To College Pass is a pass good for unlimited bus and train rides per semester in the Minneapolis-St. Paul area sold at a discounted rate to eligible college and university students. Participating schools include Augsburg College, College of St. Catherine, Concordia University, Hamline University, Inver Hills Community College, Macalester College, Metropolitan State University, Minneapolis College of Art and Design, Minneapolis Community and Technical College, Normandale Community College, McNally Smith College of Music, and University of St. Thomas.^[4]

References