Gibson Marauder

Mid-production Gibson Marauder with rotary pickup selector in the lower bout

The Gibson Marauder is an electric guitar model produced from 1974 to 1979 by Gibson. Designed to compete with guitars made by Fender, it had limited success and was discontinued with fewer than 6,400 ever made.

History

The Marauder came at a difficult time for American guitar makers: sales in the early 1970s were down, and there was significant competition from Japanese competitors. It was Gibson's attempt to break into the single coil pickup, bolt-on neck guitar market dominated by Fender. In cooperation with Bill Lawrence, who had joined Gibson in 1972 and had already produced the L6-S, the Marauder was developed to compete with Fender, and had a pickup layout reminiscent of the Fender Telecaster, though in fact it had two humbucker pickups.^[1]

The guitar, though officially introduced in 1974, began shipping in 1975 and was endorsed by Ace Frehley and Paul Stanley. Minor modifications were made in 1976 and in 1978; it was cancelled in 1979 though some were still made until 1982. In all, fewer than 1,400 were ever made.^[1]

Description

The Marauder sports a contoured single cutaway Les Paul-shaped body, and a bolt on maple neck with a headstock similar to the Flying V's. Marauders were made with alder, maple, or mahogany bodies. The fretboard was produced both in the traditional Gibson rosewood, or the more Fender-like maple, with twenty-two frets. Most had dot markers, "though some may have had trapezoid."^[1]

The Marauder features custom-designed Bill Lawrence pickups sealed in clear epoxy. The guitar has a regular-sized humbucker pickup in the neck position and a small humbucker, in a blade style resembling a single coil, was mounted at an angle by the bridge (Telecaster-style). This arrangement resembles the Fender Telecaster Custom. The resulting sound was closer to the Fender sound than that of most Gibson guitars, with more higher frequencies than regular Gibsons.^[1]

Early Marauders have a three-way toggle switch in the lower bout of the body, to turn on either one or both pickups. In 1976, a rotary potentiometer was introduced which allowed a range of blends between the two pickups. In still later Marauders, the potentiometer (now a chickenhead knob) was positioned between the volume and tone knobs.

Marauders all have Schaller made "Harmonica" ("tune-o-matic" style) bridges and the standard Gibson stopbar tailpiece. They have enclosed "Gibson Deluxe" tuners, and typical Gibson strap buttons.

References

External links

• Know Your Gibson: Marauder and S-1, at Gibson