Genlock

From Wikipedia, the free encyclopedia

Genlock (generator locking) is a common technique where the video output of one source, or a specific reference signal from a signal generator, is used to synchronize other television picture sources together. The aim in video applications is to ensure the coincidence of signals in time at a combining or switching point. When video instruments are synchronized in this way, they are said to be generator locked, or genlocked.[1][2][3]

Possible problems

Phase differences

Video signals generated and output by generator-locked instruments are said to be syntonized. Syntonized video signals will be precisely frequency locked but because of delays caused by the unequal transmission path lengths the synchronized signals will exhibit differing phases at various points in the television system. Modern video equipment such as production switchers that have multiple video inputs will often include a variable delay on each input to compensate for the phase differences and time all the input signals to precise phase coincidence.

Jumping

Where two or more video signals are combined or being switched between, the horizontal and vertical timing of the picture sources should be coincident with each other. If they are not, the picture will appear to jump when switching between the sources whilst the display device (television set) re-adjusts the horizontal and/or vertical scan to correctly reframe the image.

Colour changes

Where composite video is in use, the phase of the chrominance subcarrier of each source being combined or switched should also be coincident. This is to avoid changes in colour hue and/or saturation during a transition between sources.

Scope

Generator locking can be used to synchronize as few as two isolated sources (e.g., a television camera and a videotape machine feeding a vision mixer (production switcher)), or in a wider facility where all the video sources are locked to a single synchronizing pulse generator (e.g., a fast paced sporting event featuring multiple cameras and recording devices). Generator locking can also be used to ensure that multiple CRT monitors that appear in a movie are flicker-free, as was done in the British TV film Into The Void/Outside the Rules (2002) for example.[4] Generator locking is also used to synchronize two cameras for Stereoscopic 3D video recording.

Broadcast systems

In broadcast systems, an analog generator lock signal usually consists of vertical and horizontal synchronizing pulses together with chrominance phase reference in the form of colorburst. No picture information is usually carried to avoid disturbing the timing signals, and the name reference, black and burst, color black, or black burst is usually given to such a signal. A composite colour video signal inherently carries the same reference signals and can be used as a generator locking signal, albeit at the risk of being disturbed by out of specification picture signals.

High-definition

Although some high-definition broadcast systems may use a standard definition reference signal as a generator locking reference signal, the use of tri-level synchronising pulses directly related to the frame and line rate is increasing within HD systems. A tri-level synchronising pulse is a signal that initially goes from 0 volts DC to a negative voltage, then a positive voltage, before returning to zero volts DC again. The voltage excursions are typically 300 mV either side of zero volts, and the duration each of the two excursions is the same as a particular number of digital picture samples.

Connections

Most television studio and professional video cameras have dedicated generator locking ports on the camera. If the camera is tethered with a triax cable, the analog generator locking signal is used to lock the camera control unit which in turn locks the camera head by means of information carried within a data channel transmitted along the cable. If the camera is an ENG type camera, one without a triax connection or without a dockable head, the generator locking signal is carried through a separate cable from the video.

Natlock and Icelock

Natlock is a picture source synchronizing system using audio tone signals to describe the timing discrepancies between composite video signals, whilst Icelock uses digital information conveyed in the vertical blanking interval of a composite video signal.

See also

  • Frame synchronizer
  • Time base corrector

References

  1. ↑ "An Overview of Genlock". MicroImage Video Systems. Retrieved 2012-02-23. 
  2. ↑ "Genlock". NVIDIA. Retrieved 2012-02-23. 
  3. ↑ "genlock". ATIS Committee. Archived from the original on 2007-12-27. 
  4. ↑ Icon Bar - Into The Void Photographs
This article is issued from Wikipedia. The text is available under the Creative Commons Attribution/Share Alike; additional terms may apply for the media files.