Gauss–Seidel method

From Wikipedia, the free encyclopedia

In numerical linear algebra, the Gauss–Seidel method, also known as the Liebmann method or the method of successive displacement, is an iterative method used to solve a linear system of equations. It is named after the German mathematicians Carl Friedrich Gauss and Philipp Ludwig von Seidel, and is similar to the Jacobi method. Though it can be applied to any matrix with non-zero elements on the diagonals, convergence is only guaranteed if the matrix is either diagonally dominant, or symmetric and positive definite. It was only mentioned in a private letter from Gauss to his student Gerling in 1823.^[1] A publication was not delivered before 1874 by Seidel.

Description

The Gauss–Seidel method is an iterative technique for solving a square system of n linear equations with unknown x:

$A{\mathbf x}={\mathbf b}$ .

It is defined by the iteration

$L_{*}{\mathbf {x}}^{{(k+1)}}={\mathbf {b}}-U{\mathbf {x}}^{{(k)}},$

where the matrix A is decomposed into a lower triangular component $L_{*}$ , and a strictly upper triangular component U: $A=L_{*}+U$ .^[2]

In more detail, write out A, x and b in their components:

$A={\begin{bmatrix}a_{{11}}&a_{{12}}&\cdots &a_{{1n}}\\a_{{21}}&a_{{22}}&\cdots &a_{{2n}}\\\vdots &\vdots &\ddots &\vdots \\a_{{n1}}&a_{{n2}}&\cdots &a_{{nn}}\end{bmatrix}},\qquad {\mathbf {x}}={\begin{bmatrix}x_{{1}}\\x_{2}\\\vdots \\x_{n}\end{bmatrix}},\qquad {\mathbf {b}}={\begin{bmatrix}b_{{1}}\\b_{2}\\\vdots \\b_{n}\end{bmatrix}}.$

Then the decomposition of A into its lower triangular component and its strictly upper triangular component is given by:

$A=L_{*}+U\qquad {\text{where}}\qquad L_{*}={\begin{bmatrix}a_{{11}}&0&\cdots &0\\a_{{21}}&a_{{22}}&\cdots &0\\\vdots &\vdots &\ddots &\vdots \\a_{{n1}}&a_{{n2}}&\cdots &a_{{nn}}\end{bmatrix}},\quad U={\begin{bmatrix}0&a_{{12}}&\cdots &a_{{1n}}\\0&0&\cdots &a_{{2n}}\\\vdots &\vdots &\ddots &\vdots \\0&0&\cdots &0\end{bmatrix}}.$

The system of linear equations may be rewritten as:

$L_{*}{\mathbf {x}}={\mathbf {b}}-U{\mathbf {x}}$

The Gauss–Seidel method now solves the left hand side of this expression for x, using previous value for x on the right hand side. Analytically, this may be written as:

${\mathbf {x}}^{{(k+1)}}=L_{*}^{{-1}}({\mathbf {b}}-U{\mathbf {x}}^{{(k)}}).$

However, by taking advantage of the triangular form of $L_{*}$ , the elements of x^(k+1) can be computed sequentially using forward substitution:

$x_{i}^{{(k+1)}}={\frac {1}{a_{{ii}}}}\left(b_{i}-\sum _{{j<i}}a_{{ij}}x_{j}^{{(k+1)}}-\sum _{{j>i}}a_{{ij}}x_{j}^{{(k)}}\right),\quad i,j=1,2,\ldots ,n.$ ^[3]

The procedure is generally continued until the changes made by an iteration are below some tolerance, such as a sufficiently small residual.

Discussion

The element-wise formula for the Gauss–Seidel method is extremely similar to that of the Jacobi method.

The computation of x_i^(k+1) uses only the elements of x^(k+1) that have already been computed, and only the elements of x^(k) that have not yet to be advanced to iteration k+1. This means that, unlike the Jacobi method, only one storage vector is required as elements can be overwritten as they are computed, which can be advantageous for very large problems.

However, unlike the Jacobi method, the computations for each element cannot be done in parallel. Furthermore, the values at each iteration are dependent on the order of the original equations.

Gauss-Seidel is the same as SOR (successive over-relaxation) with $\omega =1$ .

Convergence

The convergence properties of the Gauss–Seidel method are dependent on the matrix A. Namely, the procedure is known to converge if either:

A is symmetric positive-definite,^[4] or
A is strictly or irreducibly diagonally dominant.

The Gauss–Seidel method sometimes converges even if these conditions are not satisfied.

Algorithm

Since elements can be overwritten as they are computed in this algorithm, only one storage vector is needed, and vector indexing is omitted. The algorithm goes as follows:

Inputs: <var>A</var>, <var>b</var>
Output: 

Choose an initial guess  to the solution
repeat until convergence
    for <var>i</var> from 1 until <var>n</var> do
        
        for <var>j</var> from 1 until <var>n</var> do
            if <var>j</var> ≠ <var>i</var> then
                
            end if
        end (<var>j</var>-loop)
        
    end (<var>i</var>-loop)
    check if convergence is reached
end (repeat)

Examples

An example for the matrix version

A linear system shown as $A{\mathbf {x}}={\mathbf {b}}$ is given by:

$A={\begin{bmatrix}16&3\\7&-11\\\end{bmatrix}}$ and $b={\begin{bmatrix}11\\13\end{bmatrix}}.$

We want to use the equation

${\mathbf {x}}^{{(k+1)}}=L_{*}^{{-1}}({\mathbf {b}}-U{\mathbf {x}}^{{(k)}})$

in the form

${\mathbf {x}}^{{(k+1)}}=T{\mathbf {x}}^{{(k)}}+C$

where:

$T=-L_{*}^{{-1}}U$ and $C=L_{*}^{{-1}}{\mathbf {b}}.$

We must decompose $A_{{}}^{{}}$ into the sum of a lower triangular component $L_{*}^{{}}$ and a strict upper triangular component $U_{{}}^{{}}$ :

$L_{*}={\begin{bmatrix}16&0\\7&-11\\\end{bmatrix}}$ and $U={\begin{bmatrix}0&3\\0&0\end{bmatrix}}.$

The inverse of $L_{*}^{{}}$ is:

$L_{*}^{{-1}}={\begin{bmatrix}16&0\\7&-11\end{bmatrix}}^{{-1}}={\begin{bmatrix}0.0625&0.0000\\0.0398&-0.0909\\\end{bmatrix}}$ .

Now we can find:

$T=-{\begin{bmatrix}0.0625&0.0000\\0.0398&-0.0909\end{bmatrix}}\times {\begin{bmatrix}0&3\\0&0\end{bmatrix}}={\begin{bmatrix}0.000&-0.1875\\0.000&-0.1193\end{bmatrix}},$

$C={\begin{bmatrix}0.0625&0.0000\\0.0398&-0.0909\end{bmatrix}}\times {\begin{bmatrix}11\\13\end{bmatrix}}={\begin{bmatrix}0.6875\\-0.7439\end{bmatrix}}.$

Now we have $T_{{}}^{{}}$ and $C_{{}}^{{}}$ and we can use them to obtain the vectors ${\mathbf {x}}$ iteratively.

First of all, we have to choose ${\mathbf {x}}^{{(0)}}$ : we can only guess. The better the guess, the quicker the algorithm will perform.

We suppose:

$x^{{(0)}}={\begin{bmatrix}1.0\\1.0\end{bmatrix}}.$

We can then calculate:

$x^{{(1)}}={\begin{bmatrix}0.000&-0.1875\\0.000&-0.1193\end{bmatrix}}\times {\begin{bmatrix}1.0\\1.0\end{bmatrix}}+{\begin{bmatrix}0.6875\\-0.7443\end{bmatrix}}={\begin{bmatrix}0.5000\\-0.8636\end{bmatrix}}.$

$x^{{(2)}}={\begin{bmatrix}0.000&-0.1875\\0.000&-0.1193\end{bmatrix}}\times {\begin{bmatrix}0.5000\\-0.8636\end{bmatrix}}+{\begin{bmatrix}0.6875\\-0.7443\end{bmatrix}}={\begin{bmatrix}0.8494\\-0.6413\end{bmatrix}}.$

$x^{{(3)}}={\begin{bmatrix}0.000&-0.1875\\0.000&-0.1193\end{bmatrix}}\times {\begin{bmatrix}0.8494\\-0.6413\\\end{bmatrix}}+{\begin{bmatrix}0.6875\\-0.7443\end{bmatrix}}={\begin{bmatrix}0.8077\\-0.6678\end{bmatrix}}.$

$x^{{(4)}}={\begin{bmatrix}0.000&-0.1875\\0.000&-0.1193\end{bmatrix}}\times {\begin{bmatrix}0.8077\\-0.6678\end{bmatrix}}+{\begin{bmatrix}0.6875\\-0.7443\end{bmatrix}}={\begin{bmatrix}0.8127\\-0.6646\end{bmatrix}}.$

$x^{{(5)}}={\begin{bmatrix}0.000&-0.1875\\0.000&-0.1193\end{bmatrix}}\times {\begin{bmatrix}0.8127\\-0.6646\end{bmatrix}}+{\begin{bmatrix}0.6875\\-0.7443\end{bmatrix}}={\begin{bmatrix}0.8121\\-0.6650\end{bmatrix}}.$

$x^{{(6)}}={\begin{bmatrix}0.000&-0.1875\\0.000&-0.1193\end{bmatrix}}\times {\begin{bmatrix}0.8121\\-0.6650\end{bmatrix}}+{\begin{bmatrix}0.6875\\-0.7443\end{bmatrix}}={\begin{bmatrix}0.8122\\-0.6650\end{bmatrix}}.$

$x^{{(7)}}={\begin{bmatrix}0.000&-0.1875\\0.000&-0.1193\end{bmatrix}}\times {\begin{bmatrix}0.8122\\-0.6650\end{bmatrix}}+{\begin{bmatrix}0.6875\\-0.7443\end{bmatrix}}={\begin{bmatrix}0.8122\\-0.6650\end{bmatrix}}.$

As expected, the algorithm converges to the exact solution:

${\mathbf {x}}=A^{{-1}}{\mathbf {b}}={\begin{bmatrix}0.8122\\-0.6650\end{bmatrix}}.$

In fact, the matrix A is strictly diagonally dominant (but not positive definite).

Another example for the matrix version

Another linear system shown as $A{\mathbf {x}}={\mathbf {b}}$ is given by:

$A={\begin{bmatrix}2&3\\5&7\\\end{bmatrix}}$ and $b={\begin{bmatrix}11\\13\\\end{bmatrix}}.$

We want to use the equation

${\mathbf {x}}^{{(k+1)}}=L_{*}^{{-1}}({\mathbf {b}}-U{\mathbf {x}}^{{(k)}})$

in the form

${\mathbf {x}}^{{(k+1)}}=T{\mathbf {x}}^{{(k)}}+C$

where:

$T=-L_{*}^{{-1}}U$ and $C=L_{*}^{{-1}}{\mathbf {b}}.$

We must decompose $A_{{}}^{{}}$ into the sum of a lower triangular component $L_{*}^{{}}$ and a strict upper triangular component $U_{{}}^{{}}$ :

$L_{*}={\begin{bmatrix}2&0\\5&7\\\end{bmatrix}}$ and $U={\begin{bmatrix}0&3\\0&0\\\end{bmatrix}}.$

The inverse of $L_{*}^{{}}$ is:

$L_{*}^{{-1}}={\begin{bmatrix}2&0\\5&7\\\end{bmatrix}}^{{-1}}={\begin{bmatrix}0.500&0.000\\-0.357&0.143\\\end{bmatrix}}$ .

Now we can find:

$T=-{\begin{bmatrix}0.500&0.000\\-0.357&0.143\\\end{bmatrix}}\times {\begin{bmatrix}0&3\\0&0\\\end{bmatrix}}={\begin{bmatrix}0.000&-1.500\\0.000&1.071\\\end{bmatrix}},$

$C={\begin{bmatrix}0.500&0.000\\-0.357&0.143\\\end{bmatrix}}\times {\begin{bmatrix}11\\13\\\end{bmatrix}}={\begin{bmatrix}5.500\\-2.071\\\end{bmatrix}}.$

Now we have $T_{{}}^{{}}$ and $C_{{}}^{{}}$ and we can use them to obtain the vectors ${\mathbf {x}}$ iteratively.

First of all, we have to choose ${\mathbf {x}}^{{(0)}}$ : we can only guess. The better the guess, the quicker will perform the algorithm.

We suppose:

$x^{{(0)}}={\begin{bmatrix}1.1\\2.3\\\end{bmatrix}}.$

We can then calculate:

$x^{{(1)}}={\begin{bmatrix}0&-1.500\\0&1.071\\\end{bmatrix}}\times {\begin{bmatrix}1.1\\2.3\\\end{bmatrix}}+{\begin{bmatrix}5.500\\-2.071\\\end{bmatrix}}={\begin{bmatrix}2.050\\0.393\\\end{bmatrix}}.$

$x^{{(2)}}={\begin{bmatrix}0&-1.500\\0&1.071\\\end{bmatrix}}\times {\begin{bmatrix}2.050\\0.393\\\end{bmatrix}}+{\begin{bmatrix}5.500\\-2.071\\\end{bmatrix}}={\begin{bmatrix}4.911\\-1.651\\\end{bmatrix}}.$

$x^{{(3)}}=\cdots .\,$

If we test for convergence we'll find that the algorithm diverges. In fact, the matrix A is neither diagonally dominant nor positive definite. Then, convergence to the exact solution

${\mathbf {x}}=A^{{-1}}{\mathbf {b}}={\begin{bmatrix}-38\\29\end{bmatrix}}$

is not guaranteed and, in this case, will not occur.

An example for the equation version

Suppose given k equations where x_n are vectors of these equations and starting point x₀. From the first equation solve for x₁ in terms of $x_{{n+1}},x_{{n+2}},\dots ,x_{n}.$ For the next equations substitute the previous values of xs.

To make it clear let's consider an example.

${\begin{aligned}10x_{1}-x_{2}+2x_{3}&=6,\\-x_{1}+11x_{2}-x_{3}+3x_{4}&=25,\\2x_{1}-x_{2}+10x_{3}-x_{4}&=-11,\\3x_{2}-x_{3}+8x_{4}&=15.\end{aligned}}$

Solving for $x_{1}$ , $x_{2}$ , $x_{3}$ and $x_{4}$ gives:

${\begin{aligned}x_{1}&=x_{2}/10-x_{3}/5+3/5,\\x_{2}&=x_{1}/11+x_{3}/11-3x_{4}/11+25/11,\\x_{3}&=-x_{1}/5+x_{2}/10+x_{4}/10-11/10,\\x_{4}&=-3x_{2}/8+x_{3}/8+15/8.\end{aligned}}$

Suppose we choose (0, 0, 0, 0) as the initial approximation, then the first approximate solution is given by

${\begin{aligned}x_{1}&=3/5=0.6,\\x_{2}&=(3/5)/11+25/11=3/55+25/11=2.3272,\\x_{3}&=-(3/5)/5+(2.3272)/10-11/10=-3/25+0.23272-1.1=-0.9873,\\x_{4}&=-3(2.3272)/8+(-0.9873)/8+15/8=0.8789.\end{aligned}}$

Using the approximations obtained, the iterative procedure is repeated until the desired accuracy has been reached. The following are the approximated solutions after four iterations.

$x_{1}$	$x_{2}$	$x_{3}$	$x_{4}$
$0.6$	$2.32727$	$-0.987273$	$0.878864$
$1.03018$	$2.03694$	$-1.01446$	$0.984341$
$1.00659$	$2.00356$	$-1.00253$	$0.998351$
$1.00086$	$2.0003$	$-1.00031$	$0.99985$

The exact solution of the system is (1, 2, −1, 1).

An example using Python

The following numerical procedure simply iterates through to produce the solution vector.

#initialize the matrix
mat = [ [3/5.0,    0.0,    1/10.0, -1/5.0, 0.0    ], \
        [25/11.0,  1/11.0, 0.0,    1/11.0, -3/11.0], \
        [-11/10.0, -1/5.0, 1/10.0, 0,      1/10.0 ], \
        [15/8.0,   0.0,    -3/8.0, 1/8.0,  0.0    ] ]
 
x = [0,0,0,0] #initial guess
 
for i in xrange(6):
     x[0] = mat[0][0] + mat[0][1]*0  + mat[0][2]*x[1] + mat[0][3]*x[2] + mat[0][4]*x[3]
     x[1] = mat[1][0] + mat[1][1]*x[0] + mat[1][2]*0  + mat[1][3]*x[2] + mat[1][4]*x[3]
     x[2] = mat[2][0] + mat[2][1]*x[0] + mat[2][2]*x[1] + mat[2][3]*0  + mat[2][4]*x[3]
     x[3] = mat[3][0] + mat[3][1]*x[0] + mat[3][2]*x[1] + mat[3][3]*x[2] + mat[3][4]*0
     print '%f %f %f %f' %(x[0],x[1],x[2],x[3]) #display the iterations to the user

Produces the output,

0.600000 2.327273 -0.987273 0.878864
1.030182 2.036938 -1.014456 0.984341
1.006585 2.003555 -1.002527 0.998351
1.000861 2.000298 -1.000307 0.999850
1.000091 2.000021 -1.000031 0.999988
1.000008 2.000001 -1.000003 0.999999

Program to solve arbitrary no. of equations using Matlab

disp('Give the input to solve the set of equations AX=B')
a=input('Input the square matrix A : \n');
b=input('Input the column matrix B : \n');
m=length(a);
%z is a two dimensional array in which row corresponds to values of X in a
%specific iteration and the column corresponds to values of specific
%element of X in different iterations
c=0;%random assignment
e=1;%'e' represents the maximum error
d=0;%random assignment
for u=1:m
    x(u)=b(u,1)/a(u,u);
    z(1,u)=0;%initializing the values for matrix X(x1;x2;...xm)
end
l=2;%'l' represents the iteration no.
%loop for finding the convergence factor (C.F)
for r = 1:m
    for s = 1:m
        if r~=s
           p(r)=abs(a(r,s)/a(r,r))+d;%p(r) is the C.F for equation no. r
           d=p(r);
        end
    end
    d=0;
end
if min(p)>=1 %at least one equation must satisfy the condition p<1
   fprintf('Roots will not converge for this set of equations')
else
    while(e>=1e-4)
        j1=1;%while calculating elements in first column we consider only the old values of X
        for i1=2:m
            q(j1)=(a(j1,i1)/a(j1,j1))*z(l-1,i1)+c;
            c=q(j1);
        end
        c=0;
        z(l,j1)=x(j1)-q(j1);%elements of z in the iteration no. l
        x(j1)=z(l,j1);
        for u=1:m
            x(u)=b(u,1)/a(u,u);
            z(1,u)=0;
        end
        for j1=2:m-1%for intermediate columns between 1 and m, we use the updated values of X 
            for i1=1:j1-1
                q(j1)=(a(j1,i1)/a(j1,j1))*z(l,i1)+c;
                c=q(j1);
            end
            for i1=j1+1:m
                q(j1)=(a(j1,i1)/a(j1,j1))*z(l-1,i1)+c;
                c=q(j1);
            end
            c=0;
            z(l,j1)=x(j1)-q(j1);
            x(j1)=z(l,j1);
            for u=1:m
                x(u)=b(u,1)/a(u,u);
                z(1,u)=0;
            end
        end
        j1=m;%for the last column, we use only the updated values of X
        for i1=1:m-1
            q(j1)=(a(j1,i1)/a(j1,j1))*z(l,i1)+c;
            c=q(j1);
        end
        c=0;
        z(l,j1)=x(j1)-q(j1);
        for v=1:m
            t=abs(z(l,v)-z(l-1,v));%calculates the error 
        end 
        e=max(t);%evaluates the maximum error out of errors of all elements of X 
        l=l+1;%iteration no. gets updated
        for i=1:m 
            X(1,i)=z(l-1,i);%the final solution X 
        end
    end
    %loop to show iteration number along with the values of z 
    for i=1:l-1    
        for j=1:m        
            w(i,j+1)=z(i,j);    
        end
        w(i,1)=i;
    end
    disp('   It. no.      x1        x2       x3        x4 ') 
    disp(w) 
    disp('The final solution is ') 
    disp(X) 
    fprintf('The total number of iterations is %d',l-1)
end

Program output is

Give the input to solve the set of equations AX=B
Input the square matrix A : 
[10 -2 -1 -1;-2 10 -1 -1;-1 -1 10 -2;-1 -1 -2 10]
Input the column matrix B : 
[3;15;27;-9]
   It. no.      x1        x2       x3        x4 
 
    1.0000         0         0         0         0
    2.0000    0.3000    1.5600    2.8860   -0.1368
    3.0000    0.8869    1.9523    2.9566   -0.0248
    4.0000    0.9836    1.9899    2.9924   -0.0042
    5.0000    0.9968    1.9982    2.9987   -0.0008
    6.0000    0.9994    1.9997    2.9998   -0.0001
    7.0000    0.9999    1.9999    3.0000   -0.0000
    8.0000    1.0000    2.0000    3.0000   -0.0000
 
The final solution is 
 
    1.0000    2.0000    3.0000   -0.0000
 
The total number of iterations is 8

Notes

↑ Gauss 1903, p. 279; direct link.
↑ Golub & Van Loan 1996, p. 511.
↑ Golub & Van Loan 1996, eqn (10.1.3).
↑ Golub & Van Loan 1996, Thm 10.1.2.

References

Gauss, Carl Friedrich (1903), Werke (in German) 9, Göttingen: Köninglichen Gesellschaft der Wissenschaften .
Golub, Gene H.; Van Loan, Charles F. (1996), Matrix Computations (3rd ed.), Baltimore: Johns Hopkins, ISBN 978-0-8018-5414-9 .
Black, Noel and Moore, Shirley, "Gauss-Seidel Method", MathWorld.

This article incorporates text from the article Gauss-Seidel_method on CFD-Wiki that is under the GFDL license.

External links

Hazewinkel, Michiel, ed. (2001), "Seidel method", Encyclopedia of Mathematics, Springer, ISBN 978-1-55608-010-4
Gauss–Seidel from www.math-linux.com
Module for Gauss–Seidel Iteration
Gauss–Seidel From Holistic Numerical Methods Institute
Gauss Siedel Iteration from www.geocities.com
The Gauss-Seidel Method
Bickson
Matlab code
C code example

v t e Numerical linear algebra

Key concepts	Floating point Numerical stability BLAS

Problems	Matrix multiplication Matrix decompositions Linear equations Sparse problems

Hardware	CPU cache TLB Cache-oblivious algorithm SIMD Multiprocessing

Software	Specialized libraries General purpose software

This article is issued from Wikipedia. The text is available under the Creative Commons Attribution/Share Alike; additional terms may apply for the media files.