Flash powder

Flash powder is a pyrotechnic composition, a mixture of oxidizer and metallic fuel, which burns quickly and if confined produces a loud report. It is widely used in theatrical pyrotechnics and fireworks (namely salutes, e.g., cherry bombs, M-80s, firecrackers, and cap gun shots) and was once used for flashes in photography.

Examples of theatrical binary flash powders. Note the shared oxidizer (A) powder for some types of fuels (B).

Different varieties of flash powder are made from different compositions; most common are potassium perchlorate and aluminium powder. Sometimes, sulfur is included in the mixture to increase the sensitivity. Early formulations used potassium chlorate instead of Potassium Perchlorate.

Flash powder compositions are also used in military pyrotechnics, when production of large amount of noise, light, or infrared radiation is required; e.g. missile decoy flares and stun grenades.

Safety and handling

Flash powders even within intended usages often release explosive force of deadly capacity. Nearly all widely used flash-powder mixtures are sensitive to shock, friction and electrostatic-discharge. In certain mixtures it is not uncommon for this sensitivity to spontaneously change over time, or due to change in the environment, or to other unknowable factors in either the original manufacturing, or in real-world storage. Additionally, accidental contaminants such as strong acids or sulphur compounds can sensitise them even more. Because flash-powder mixtures are so easy to initiate, there is potentially a high risk of accidental explosions which can inflict severe blast/fragmentation injuries e.g., blindness, explosive amputation, permanent maiming or disfigurement. Fatalities have occurred. The various flash powder compositions should therefore not be handled by anyone who is unfamiliar with their properties, or the handling techniques required to maintain safety. Flash powder and flash-powder devices pose exceptionally high risks to children, who typically cannot understand the danger and may be less adept with safe handling techniques. As a result, children tend to suffer more severe injuries than adults.

Flash powders—especially those that use chlorate—are often highly sensitive to friction, heat/flame and static electricity. A spark of as little as 0.1-10 millijoules can set off certain mixtures. Certain formulations prominent in the underground press contain both sulfur and potassium chlorate. These mixtures are especially shock and friction sensitive and in many applications should be considered unpredictable. Modern pyrotechnic practices call for never using sulfur in a mix containing chlorate salts.

Some flash powder formulations (those that use single-digit micrometre flake aluminium powder or fine magnesium powder as their fuel) can self-confine and explode in small quantities. This makes flash powder dangerous to handle, as it can cause severe hearing damage and amputation injury even when sitting in the open. Self-confinement occurs when the mass of the pile provides sufficient inertia to allow high pressure to build within it as the mixture reacts. This is referred to as 'inertial confinement', and it is not to be confused with a detonation.

Flash powder of any formulation should not be mixed in large quantities by the amateur pyrotechnician. Beginners should start with sub-gram quantities, and refrain from making large devices. Flash powder should only be made at the site at which it will be used. Additionally, the mixture should be made immediately before use. When made, then transportation, storage, usage, and various possession and illegal "firearms" laws, (including felonies,) may come into effect that do not apply to the unmixed or pre-assembled components.

Mixtures

Normally, flash powder mixtures are compounded to achieve a particular purpose. These mixtures range from extremely fast burning mixtures designed to produce a maximum audio report, to mixtures designed to burn slowly and provide large amounts of illumination, to mixtures that were formerly used in photography.

Aluminium and chlorate

Because of the above mentioned instability, the combination of aluminium powder and potassium chlorate is a poor choice for flash powder that is to be stored for more than a very short period of time. For that reason it has been largely replaced by the potassium perchlorate mixtures. Chlorate mixes are used when cost is the overriding concern, because potassium chlorate is less expensive than perchlorate. It is critically important to exclude sulphur and any acidic components from these mixtures. Sometimes a few percent of bicarbonate buffer is added to the mixture to ensure the absence of acidic impurities.

KClO₃ + 2Al → Al₂O₃ + KCl

The composition is approximately 70% KClO₃ : 30% Al by weight for the reactants of the above stoichiometrically balanced equation.

Aluminium - nitrate with sulfur

This composition, usually in a ratio of 5 parts potassium nitrate, to 3 parts aluminium powder, to 2 parts sulfur, is especially popular with hobbyists. It is not very quick burning, unless exceptionally fine ingredients are used. Although it incorporates sulfur, it is in fact fairly stable, sustaining multiple hits from a hammer onto a hard surface. Adding 2% of its weight with boric acid is reputed to significantly increase stability and shelf life, through resistance to dampening through ambient humidity. Other ratios such as 6 KNO3/3 Al/2 S and 5 KNO3/2 Al/3 S also exist and work. All ratios have similar burn times and strength, although 5 KNO3/3 Al/2 S seems to be dominant.

2 KNO₃ + 4 Al + S → K₂S + N₂ + 2 Al₂O₃

The composition is approximately 59% KNO₃ : 31.6% Al : 9.4% S by weight for the reactants of the above stoichiometrically balanced equation.

For best results, "German Dark" aluminium should be used, with airfloat sulfur, and finely ball milled pure potassium nitrate. The finished mixture should never be ball milled together.

Aluminium and perchlorate

Aluminium powder and potassium perchlorate are the only two components of the pyrotechnic industry standard flash powder. It provides a great balance of stability and power, and is the composition used in most commercial exploding fireworks.

The balanced equation for the reaction is:

3 KClO₄ + 8 Al → 4 Al₂O₃ + 3 KCl

Although not stoichiometrically balanced, a ratio of seven parts Potassium Perchlorate to three parts Dark Pyro Aluminium is the composition used by most pyrotechnicians. However, a ratio of 2 mass units potassium perchlorate to 1 mass unit Dark Pyro Aluminium is closer to stoichiometric, and may produce a louder report.

For best results, the aluminium powder should be "Dark Pyro" grade, with a flake particle shape, and a particle size of less than 10 micrometres. The KClO₄ should be in powder form, free from clumps. It can be sieved through a screen if necessary to remove any clumps prior to use. The particle size of the perchlorate is not as critical as that of the aluminium component, as much less energy is required to decompose the KClO₄ than is needed to melt the aluminium into the liquid state required for the reaction.

Although this composition is fairly insensitive, it should be treated with care and respect. Hobbyist pyrotechnicians usually use a method called diapering, in which the materials are poured separately onto a large piece of paper, which is then alternately lifted at each corner to roll the composition over itself and mix the components. Some amateur pyrotechnicians choose to mix the composition by shaking in a closed paper container, as this is much quicker and more effective than diapering. Paper/cardboard is chosen over other materials such as plastic as a result of its favorable triboelectric properties.

Large quantities should never be mixed in a single batch. Large quantities are not only more difficult to handle safely, but they place innocent bystanders within the area at risk. In the event of accidental ignition, debris from a multiple-pound flash powder explosion can be thrown hundreds of feet with sufficient force to kill or injure. (Note: 25 grams of mixture is enough to explode in open air without constraint other than air pressure.)

No matter the quantity, care must always be taken to prevent any electrostatic discharge or friction during mixing or handling, as these may cause accidental ignition.

Magnesium and nitrate

Another flash composition common among amateurs consists of magnesium powder and potassium nitrate. Other metal nitrates have been used, including Barium and strontium nitrates. Compositions using nitrate and magnesium metal have been used as photographic flash powders almost since the invention of photography.

2 KNO₃ + 5 Mg → K₂O + N₂ + 5 MgO

The composition is approximately 50% KNO3 : 50% Mg by weight for the reactants of the above stoichiometrically balanced equation.

Ba(NO₃)₂ + 5 Mg → BaO + N₂ + 5 MgO

Mixtures designed to make reports are substantially different than mixtures designed for illumination. A stoichiometric ratio of three parts KNO₃ to two parts Mg is close to ideal, and provides the most rapid burn. The magnesium powder should be smaller than 200 mesh, though up to 100 mesh will work. The potassium nitrate should be impalpable dust. This mixture is popular in amateur pyrotechnics because it is insensitive and relatively safe as such things go.

For photographic use, mixtures containing magnesium and nitrates are made much more fuel rich. The excess magnesium is volatilized by the reaction and burns in air providing additional light. In addition, the higher concentration of fuel results in a slower burn, providing more of a "poof" and less of a "bang" when ignited. A formula from 1917 specifies 5 parts of magnesium to 6 parts of barium nitrate for a stoichiometry of nine parts fuel to one part oxidizer.^[1] Modern recreations of photographic flash powders may avoid the use of barium salts because of their toxic nature. A mixture of five parts 80 mesh magnesium to one part of potassium nitrate provides a good white flash without being too violent. Fuel rich flash powders are also used in theatrical flash pots.

Magnesium based compositions degrade over long periods of time, as Magnesium does not form a passivating oxide coating, meaning the metallic Mg will slowly react with atmospheric oxygen and moisture. In military pyrotechnics involving magnesium fuels, external oxygen can be excluded by using hermetically sealed canisters. Commercial photographic flash powders are sold as two part mixtures, to be combined immediately before use.

Magnesium and PTFE

A flash composition designed specifically to generate flares that are exceptionally bright in the infrared portion of the spectrum use a mixture of pyro grade magnesium and powdered polytetrafluoroethylene. These flares are used as decoys from aircraft that might be subject to heat-seeking missile fire.

2n Mg + (C₂F₄))_n → 2n MgF₂ (s) + 2n C (s)

Antimony trisulfide and chlorate

This mixture, and similar mixtures sometimes containing pyro aluminium have been used since the early 1900s for small "Black Cat" style paper firecrackers. Its extremely low cost makes it popular among manufacturers of low-grade fireworks in China. Like all mixtures containing Chlorates, it is extremely sensitive to friction, impact and ESD, and is considered unsafe in pyrotechnic devices that contain more than a few tens of milligrams of the mixture.

3 KClO₃ + Sb₂S₃ → Sb₂O₃ + 3 SO₂ + 3KCl

This mixture is not highly energetic, and in at least some parts of the United States, firecrackers containing 50 mg or less of this mixture are legal as consumer fireworks.

See also

• Pyrotechnic initiator
• Sprengel explosive
• Thermite
• Black powder
• Lycopodium powder

References

External links

• Flash Powder Three different types of Flash powder