Fastrac (engine)
| Country of origin | United States |
|---|---|
| Manufacturer | NASA |
| Application | small, cheap, expendable rockets |
| Liquid-fuel engine | |
| Propellant | LOX / RP-1 (rocket grade kerosene) |
| Cycle | gas-generator |
| Performance | |
| Thrust (vac.) | 60,000 lbf (284 kN) |
| Thrust (SL) | 284.41 kN |
| Isp (vac.) | 315 s (3.0 km/s)[1] |
| Dimensions | |
| Length | 2.13 m (7 ft 0 in)[2] |
| Diameter | 1.22 m (4 ft 0 in)[2] |
| Dry weight | less than 910 kg (2,010 lb)[3] |
Fastrac or alternatively MC-1 engine was a pump-fed liquid rocket engine developed by NASA for use on small inexpensive, expendable rockets. Fastrac uses RP-1 kerosene and liquid oxygen as propellants in a gas-generator power cycle.
Ignition of engine was achieved via starter fluid injected into combustion chamber before kerosene was fed.
Propellants are fed via a single shaft, dual impeller turbo-pump.
The engine design used an inexpensive, expendable, ablatively cooled carbon fiber composite nozzle, and produced 60,000 lbf (285 kN) of thrust.
Engine system development testing of the MC-1 has been ongoing since 24 Oct 1998. Until cancellation, 48 tests were conducted on three engines using three separate test stands.[citation needed]
The engine never flew.
MC-1 later designation
After the cancellation of the FASTRAC program NASA tried to salvage this design for use in other rockets such as Rotary Rocket and X-34 project. The designation of the rocket engine was changed from the Fastrac 60K to MC-1.
Legacy
The basic principles of the Fastrac design (namely, a pintle injector and ablatively cooled chamber) lived on in SpaceX's Merlin 1a engine, which even uses a turbo pump from the same subcontractor.[citation needed] The Merlin-1a was somewhat larger engine with a thrust of 77,000 lbf (340 kN) versus 60,000 lbf (270 kN) for Fastrac. The same basic design was capable of much higher thrust levels after upgrading the turbopump. The latest variants of the Merlin-1d achieve 155,000 lbf (690 kN) of thrust, but is a regeneratively cooled engine. [citation needed]
Engine specifications
- Sea level thrust:
- Sea level specific impulse:
- Vacuum thrust: 60,000 lbf (284.41 kN)
- Vacuum specific impulse: 314 s (3.0 kN·s/kg)
- Chamber pressure:
- Total mass flow: 91.90 kg/s
- Gas generator pressure: 39.64 bar
- Gas generator temperature: 888.89 K
- Throat diameter: 0.22 m
- Fuel: RP-1 (rocket grade kerosene)
- Oxidizer: Liquid oxygen
See also
- Merlin (rocket engine) SpaceX booster engine
- Kestrel (rocket engine) SpaceX small upper stage engine for Falcon-1
- RD-180 RP-1 engine currently used in the US
- RS-27A RP-1 engine currently used in the US
- RD-191 contemporary Russian RP-1 engine
- NK-33 record setting RP-1 engine, currently resurrected for use by Orbital Sciences in the Antares (formerly known as Taurus II) launcher
- F-1 (rocket engine)
- Executor (rocket engine)
References
This article incorporates public domain material from websites or documents of the National Aeronautics and Space Administration.
- Notes
- Ballard, R.O.; Olive, T.: Development Status of the NASA MC-1 (Fastrac) Engine; AIAA/ASME/SAE/ASEE Joint Propulsion Conference and Exhibit, 2000 Huntsville, AL, AIAA 2000-3898
External links
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
