Falconer's knot

From Wikipedia, the free encyclopedia
Falconer's knot
Category Hitch
Related Halter hitch
Releasing Non-jamming
Typical use Falconry

The falconer's knot is a knot used in falconry to tether a bird of prey to a perch. Some sources show this knot to be identical to the halter hitch,[1] but with a specific method of single-handed tying needed when the other hand is occupied holding the bird.

Tying

How to tie the falconer's knot:

  1. Pass the rope anti-clockwise around the perch or glove, with the tail end to the left.
  2. Place the right hand, palm up, underneath the both pieces of rope and grip the tail piece(left) between the first finger and middle finger, as if one was cutting the rope with scissors. The other fingers are below not in use at the moment.
  3. Place the thumb through the two pieces, over the "scissors" and under the second bring it to the right, as if one was hitchhiking.
  4. Keeping the thumb in the same position rotate the wrist to the right so that the back of the hand is facing up.
  5. The thumb will have made a loop. With the pinched first and middle finger put the "scissored" rope through the "hitchhikers's" loop.
  6. Pass the free end through the new loop to secure.

To untie simply pull out the free end and tug hard and it should untie. When securing birds of prey often two knots will be used as birds can learn to untie them. Also a slip knot may be tied using steps 1-5.

See also

References

  1. Parry-Jones, Jemima (1994). Training Birds of Prey. David & Charles. p. 73. ISBN 0-7153-1238-3. 

External links

This article is issued from Wikipedia. The text is available under the Creative Commons Attribution/Share Alike; additional terms may apply for the media files.