FP-45 Liberator
FP-45 Liberator | |
---|---|
The FP-45/M1942 | |
Type | Single-shot pistol |
Place of origin | United States |
Service history | |
In service | 1942–1945 |
Used by | Dropped into occupied territories for use by insurgents |
Wars | World War II |
Production history | |
Designer | George Hyde[1] |
Designed | May 1942[1] |
Manufacturer | Guide Lamp Corporation of General Motors Corporation[1] |
Unit cost | $2.10 (1942)[1] |
Produced | June 1942 – August 1942[1] |
Number built | 1,000,000 |
Specifications | |
Weight | 1 lb (450 g) |
Length | 5.55 in (141 mm) |
Barrel length | 4 in (100 mm) |
| |
Cartridge | .45 ACP |
Action | Single-shot |
Muzzle velocity | 820 ft/s (250 m/s) |
Effective firing range | 8 yd (7.3 m) |
Feed system | Single-shot |
The FP-45 Liberator was a pistol manufactured by the United States military during World War II for use by resistance forces in occupied territories. The Liberator was never issued to American or other Allied troops and there is no documented instance of the weapon being used for its intended purpose, though it is worth noting that the intended recipients, irregulars and resistance fighters, rarely kept detailed records due to the inherent risks if the records were captured by the enemy. Many FP-45 pistols were never distributed and were destroyed by Allied forces after the war; most of those distributed were lost or disposed of without any combat use.[1]
Project history
The concept was suggested by a Polish military attache in March 1942. The project was assigned to the US Army Joint Psychological Warfare Committee and was designed for the United States Army two months later by George Hyde of the Inland Manufacturing Division of the General Motors Corporation in Dayton, Ohio. Production was undertaken by General Motors Guide Lamp Division to avoid conflicting priorities with Inland Division production of the M1 carbine.[1] The army designated the weapon the Flare Projector Caliber .45 hence the designation FP-45. This was done to disguise the fact that a pistol was being mass-produced. The original engineering drawings label the barrel as "tube", the trigger as "yoke", the firing pin as "control rod", and the trigger guard as "spanner". The Guide Lamp Division plant in Anderson, Indiana assembled a million[2] of these guns. The Liberator project took about six months from conception to the end of production with about 11 weeks of actual manufacturing time, done by 300 workers.
Design
The FP-45 was a crude, single-shot pistol designed to be cheaply and quickly mass-produced. It had just 23 largely stamped and turned steel parts that were cheap and easy to manufacture. It fired a .45 caliber pistol cartridge from an unrifled barrel. Due to this limitation, it was intended for very close-in use, 1–4 yards (0–5 m). Its maximum effective range was only about 25 feet (7.6 m). At longer range, the bullet would begin to tumble and stray off course. As a result of its low quality, it was nicknamed the "Woolworth gun."
Wartime use
The Liberator was shipped in a cardboard box with 10 rounds of .45 ACP ammunition, a wooden dowel to remove the empty cartridge case, and an instruction sheet in comic strip form[3] showing how to load and fire the weapon. Extra ammunition could be stored in the pistol grip. The Liberator was a crude and clumsy weapon, never intended for front line service. It was originally intended as an insurgency weapon to be mass dropped behind enemy lines to resistance fighters in occupied territory. A resistance fighter was to recover the gun, sneak up on an Axis occupier, kill or incapacitate him, and retrieve his weapons.
The pistol was valued as much for its psychological warfare effect as its actual field performance. It was believed that if vast quantities of these handguns could be delivered into Axis-occupied territory, it would have a devastating effect on the morale of occupying troops. The plan was to drop it in such great quantities that occupying forces could never capture or recover all of them. It was hoped that the thought of thousands of these unrecovered weapons potentially in the hands of the citizens of occupied countries would have a deleterious effect on enemy morale.[4]
General Dwight D. Eisenhower's staff never saw the practicality in mass dropping the Liberator over occupied Europe, and authorized distribution of fewer than 25,000 of the half million FP-45 pistols shipped to Great Britain for the French resistance. Generals Joseph Stillwell and Douglas MacArthur were similarly unenthusiastic about the other half of the pistols scheduled for shipment to the Pacific. The Army then turned 450,000 Liberators over to the Office of Strategic Services (OSS). Resistance fighters in both theatres were supplied with more effective weapons whenever possible; French use of the FP-45 remains undocumented; although the OSS distributed a few to Greek resistance forces in 1944. 100,000 FP-45 pistols were shipped to China in 1943, but the number actually distributed remains unknown. A few were distributed to Philippine troops under the Commonwealth Army and Constabulary and resistance fighters.[1]
Firearms collectors
The original delivered cost for the FP-45 was $2.40/unit[3] ($32 in 2010). A Liberator in good condition today can fetch approximately $1,200, with the original box bringing an additional $500, with an original extremely rare paper instruction sheet, the value could exceed $2,000 to a collector of rare World War II militaria. Fake sheets exist, but authentic examples have a clearly visible watermark which is difficult to duplicate.
See also
- Deer gun, a Liberator-style handgun tested during the Vietnam war
References
- ↑ 1.0 1.1 1.2 1.3 1.4 1.5 1.6 1.7 Bruce N. Canfield "Desperate Times: The Liberator Pistol" American Rifleman August 2012 pp.48-51&83-84
- ↑ http://home.pacbell.net/rlhag65/liberator.html
- ↑ 3.0 3.1 Bishop, Chris (2006). The Encyclopedia of Small Arms and Artillery. Grange Books. p. 19. ISBN 978-1-84013-910-5.
- ↑ Wolfgang Michel: Die Liberator Pistole FP-45: Partisanenwaffe und Instrument der psychologischen Kriegsführung. ISBN 978-3-8370-9271-4
External links
Wikimedia Commons has media related to FP-45 Liberator. |
- The Liberator Pistol at JustGuns.com
- The Liberator instruction sheet
- Safe handling of Liberator pistols and modern replicas
- The Liberator Pistol, by Ralph Hagan