The European Robotic arm is shown on the left attached to
Nauka, the spare elbow joint with 2 limbs is shown on the right, attached to
Rassvet
The European Robotic Arm (ERA) is a robotic arm to be attached to the Russian segment of the International Space Station. It will be the first robot arm able to work on the Russian space station segments, and will supplement the two Russian Strela cargo cranes that are already installed on the Pirs module. The ERA is designed and assembled by Dutch Space, an EADS Astrium company.
Major features and tasks
The ERA has several interesting features. Most prominent are its ability to 'walk' around the exterior of the station under its own control, moving hand-over-hand between pre-fixed basepoints, and its ability to perform many tasks automatically or semi-automatically, thereby freeing its operators to do other work. Specific tasks of ERA include:
- Installation and deployment of solar arrays
- Replacement of solar arrays
- Inspection of the station
- Handling of (external) payloads
- Support of astronauts during space walks
The International Space Station already features two robotic arms, the first being the Canadarm2, but because of the different types of basepoints and payload mounting units, that arm cannot be used on the Russian segment of the ISS. The other arm is the Japanese Experiment Module Remote Manipulator System (JEM-RMS). Because all Russian and European spacecraft dock automatically there is no need to manipulate spacecraft on the Russian segment so the European arm is smaller and less powerful than Canadarm2.
Developed for the European Space Agency (ESA) by a number of European space companies, with Dutch Space as prime contractor and subcontractors in 8 countries, the robot arm will be launched by a Proton rocket, along with the MLM, in 2015 to be put to work in space by the ISS crew. In 2010, a spare elbow joint for the arm was launched preemptively, attached to the Mini-Research Module 1 (MRM-1). The MLM will also serve as home base for ERA; originally, the arm was going to be attached to the Science Power Platform.
Control of ERA
Control and data interfaces of ERA
Astronauts can control the robot from both inside and outside the space station. Control from inside the space station (Intra Vehicular Activity-Man Machine Interface (IVA-MMI)) uses a laptop, which shows a model of the ERA and its surroundings. Control from outside the space station (Extra Vehicular Activity-Man Machine Interface (EVA-MMI)) uses a specially-designed interface that can be used while in a spacesuit.
Arm components
in-orbit replaceable units (ERUs) of ERA
- Two 'limbs': symmetrical arm sections made of carbon fibre, approximately 5 metres long
- Two identical gripper mechanisms (End Effectors ('EE')) also capable of transferring data, power or mechanical actuation to payloads
- Two wrists with three joints each
- One elbow joint
- One central control computer within the arm ('ECC')
- Four camera and lighting units ('CLU')
Project status
- 2005 - final qualification and delivery to the customer
- May 2010 - STS-132 - preemptive launch of a spare elbow joint with 2 limbs for ERA to the International Space Station
- 2015 - Launch of ERA with MLM on a Proton rocket[1]
Technical data
- Total length - 11.3 metres (37 ft)
- Launch Mass - 630 kilograms (1,390 lb)
- Maximum payload mass - 8,000 kilograms (18,000 lb)
- Maximum Tip Speed - 0.1 metres per second (0.33 ft/s)
- Tip Positioning accuracy - 5 millimetres (0.20 in)
See also
- Canadarm, which was used on the Space Shuttle
- Mobile Servicing System (MSS), also known by its primary component the Canadarm2, used on the ISS
- The Remote Manipulator System, used on the ISS module Kibo
- Dextre, also known as the Special Purpose Dexterous Manipulator (SPDM), used on the ISS
- Strela, a crane used on the ISS to perform similar tasks as the Mobile Servicing System
References
External links
- European Robotic Arm - ESA's description and specifications of the arm from July 2004
- ERA - Description, with photos, from Dutch Space
|
---|
| Overview | | |
---|
| In orbit |
Major components | |
---|
| Subsystems | |
---|
|
---|
| Future |
For Proton launch | |
---|
| For Soyuz launch | |
---|
| For Falcon launch | |
---|
| Proposed | |
---|
|
---|
| Spare hardware | |
---|
| Cancelled | |
---|
| Support vehicles |
|
---|
| Mission control |
- MCC-H (NASA)
- TsUP (RKA)
- Col-CC (ESA)
- ATV-CC (ESA)
- JEM-CC (JAXA)
- HTV-CC (JAXA)
- MSS-CC (CSA)
|
---|
|
- Book
- Category
- Spaceflight portal
|
|
|
---|
|
| |
---|
| | |
---|
| Facilities | |
---|
| Communications | |
---|
| Programmes | |
---|
| Predecessors | |
---|
| Related topics | |
---|
| |
|
---|
| Science |
Solar physics | |
---|
| Planetary science | |
---|
| | |
---|
| Earth observation | |
---|
|
---|
| | |
---|
| Telecommunications | |
---|
| | |
---|
| Cancelled | |
---|
| Failed | |
---|
|
Current missions in italics. |
|
|
Future spaceflights |
---|
| Manned |
|
---|
| Unmanned |
2014 | |
---|
| 2015 | |
---|
| 2016 | |
---|
| 2017 | |
---|
| 2018 | |
---|
| 2019+ | |
---|
|
---|
| Recently launched | |
---|
|
For proposed but not yet planned spacecraft see Category:Proposed spacecraft |
|