E-mu Emax

From Wikipedia, the free encyclopedia
Not to be confused with Emacs.

The Emax was a line of samplers, developed, manufactured, and sold by E-mu Systems from 1986 to 1995. Sold alongside their more expensive Emulator II and III samplers, the Emax line was conceived after the release of the Akai S-612 and Sequential Prophet 2000, and was designed to compete for the lower end of the sampling market.

The name Emax can refer to one of two specific models, the Emax (which was grey), and the Emax II (which was black). The Emax is sometimes referred to as the Emax I or the Emax 1000 to avoid confusion between the two models; E-mu Systems, however, never referred to it as such.

E-mu Emax SE (1988)

The Emax

The original Emax was released in 1988, after the discontinuation of the Emulator II. The base model cost $2,995; a rack version was also available for $2,695. Although it was fairly similar to the Emulator II in sampling specifications, the Emax used much more reliable parts, and stored sounds on 3½" floppy disks, as opposed to the more antiquated 5¼" floppy disks that the Emulator used. The Emax was advertised as a 12-bit sampler, which was, in reality, only half-true; although playback was 12-bit, only 8 bits were used to store each sample. While this led some to regard the Emax as inferior to its competitors, many modern users consider it to be a key part of the Emax's sound.

Numerous upgrades were available for the Emax during its lifetime. The Emax HD featured a 20 megabyte hard drive for storing samples. The Emax SE added an additive synthesis engine that let the user create sounds from scratch.

Sample memory remained the same at 512 KB for all models. SCSI can be retrofitted to second and third revision motherboards and was standard on the final model the Plus. The Emax was discontinued, replaced by Emax-II

The Emax II

E-mu Emax II (1989)

The Emax was replaced in 1989 by the Emax II and Emax II turbo. Although the Emax II was a true 16-bit sampler with more polyphony, it also used digital filters and components, which sounded noticeably different from the original's analogue filter chips. The Emax II also sported a noticeably higher pricetag; a base model cost $3,595, while a fully expanded model could cost as much as $8,000. Nevertheless, the Emax II found a niche among many professionals due to its large and varied sample library, and it enjoyed the longest production run of any E-mu product.

Many of the same upgrades that were available for the original Emax could also be added to the Emax II. The Emax II Turbo, released in 1990, added stereo sampling capabilities and more built-in sample memory.

E-mu ESI-32 (1994/1995) [1]

In 1995, the Emax II was discontinued, replaced by the rackmountable ESi-32, and later the ESI-4000 and the ESI-2000.

Notable users

References

  1. ↑ "E-MU Product History". E-MU Systems. 
This article is issued from Wikipedia. The text is available under the Creative Commons Attribution/Share Alike; additional terms may apply for the media files.